Used Clean Room Iso 8 for sale (44,549)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Gkjdpeq H H Rusfx Al Soc Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Godpfx Aszgcy Del Sskc Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Condition: used, Year of construction: 2015, functionality: fully functional, For filled Berliner donuts, yeast donuts, apple swirls, coated quark balls, and spritz cookies. Godpfsz Auabjx Al Sekc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 5,710 h, load capacity: 1,500 kg, lifting height: 5,500 mm, free lift: 1,870 mm, fuel type: gas, mast type: triplex, construction height: 2,405 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 5,500 mm Free lift: 1,870 mm Load capacity: 1,500 kg Gkedpfx Ajz I Imvel Sec MACHINE DETAILS Mast type: Triplex Fuel type: Gas ISO class: ISO Class 2 = 1,000–2,500 kg Weight (according to nameplate): 3,010 kg Operating hours: 5,710 h EQUIPMENT Side shifter

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet Gksdpjz Ahccjfx Al Sec • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles Gjdpfx Aoz Aha Iol Sjkc • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 13720-01, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, Eight-Lane Ultra-Clean Cup Filling & Sealing Machine – 15,000 cups/h Fully automatic, eight-lane inline cup filling and sealing machine for dairy products, designed for hygienic production under Ultra-Clean conditions. The machine achieves an output of up to 15,000 cups per hour and is equipped for two cup diameters: Ø75 mm and Ø95 mm. With an optional pre-dosing unit, the machine is also suitable for manufacturing multi-component products. Side-by-side dosing of two product components within a single cup is possible. Technical data: Output: up to 15,000 cups/h Configuration: 8-lane inline machine Cup diameters: Ø75 mm / Ø95 mm Year of manufacture: 2015 Control system: Schneider-Elau (Siemens upgrade available) Hygienic concept: Ultra-Clean Cup sterilization: UVC Application: Dairy products Machine features: Automatic cup feeding UVC cup sterilization Hygienic product filling Automatic lid application Sealing station Gksdjzz Ngmepfx Al Soc Automatic cup discharge Format changeover between Ø75 mm and Ø95 mm Stainless-steel construction Easy access for cleaning and maintenance Suitable for the hygienic filling and sealing of yogurt, cream, desserts, and other dairy products. Further technical information is available upon request.

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards Gksdpfx Aozqtkzjl Ssc - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Cleanrooms & FFU controllers – available immediately, at attractive prices! Are you looking for a professional cleanroom solution? Then you’ve come to the right place! We offer high-quality cleanroom systems and control technology directly from our own stock – without long delivery times, at fair prices. Filter Fan Unit (FFU) controllers – grab them now! ✔ 10 units available immediately ✔ Including digital control unit ✔ New – €1,000 per unit Gedpfx Alorlm Rve Sekc Your cleanroom – tailored to your dimensions, according to your requirements We plan, deliver, and build your cleanroom – completely according to your wishes. Our modular wall elements enable flexible room concepts with glazing and integrated ventilation technology. The quality of our work can be seen in the photos – a successfully completed project for a customer in the Netherlands. Unbeatable value for money: Starting from just €500-€750 per m² of floor space – including glazing, for a room height of 2,500 mm. Example: A cleanroom measuring 4 m × 4 m costs you from €8,000 net – ready for use and built according to your specifications. Contact us today! We will quickly and easily create a customized offer for you – for any size. Your team at Impuls Engineering GmbH

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Gjdopcgy Repfx Al Sjkc

Year of construction: 2008, condition: used, filling amount 180 l injection pressure 1,3 bar 700 l/min diameter 800 mm Gkedewgi Epopfx Al Sjc voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm weight of the machine ca. 300 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Manufacturer - Canellitech Srl Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Godpfx Aleulpu Se Sskc Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Pump specifications: Gedoz A Avhjpfx Al Sskc Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Condition: good (used), mileage: 137,839 km, power: 309 kW (420.12 HP), first registration: 01/1987, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 10, total length: 6,320 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,000 kg, permissible axle load (axle 2): 11,000 kg, Year of construction: 1987, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - High beam headlights - Sleeper cab = Remarks = Scania R142 V8 420 V8 - Old timer - Clean chassis/cab/interior - Dutch registration MY: Mileage: 137,839 km XLERH4X2Z04263712 77-BVP-4 Clean chassis 10-speed manual gearbox Air horn Etc. = Further Information = Technical information Number of cylinders: 8 Engine displacement: 14,190 cc Maximum front axle load: 7,000 kg Maximum rear axle load: 11,000 kg Weights Unladen weight: 7,291 kg Payload: 10,709 kg Gross vehicle weight: 18,000 kg Functional Body manufacturer: Scania Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Identification Registration number: 77-BVP-4 Further information Please contact VAEX The Truck Traders for more information. Gkjdpfxoutvzuj Al Sec

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Mazak FH-5800 – Horizontal Machining Center Spindle cooling Gjdoz Ehkpspfx Al Sekc Max. 12,000 RPM Z = 660 millimeters X = 710 millimeters Y = 610 millimeters Tool magazine for 40 tools, newer control system – 2-pallet system.

Condition: ready for operation (used), Year of construction: 2016, spindle motor power: 11,000 W, spindle speed (max.): 8,000 rpm, overall weight: 3,900 kg, total width: 1,390 mm, total height: 1,745 mm, bar diameter (max.): 38 mm, product length (max.): 3,020 mm, number of axes: 8, This 8-axis UTIMAC ISOLA XD 38 II Siemens was manufactured in 2016. It features a maximum bar capacity of Ø38 mm and a spindle speed of 8,000 rpm. The machine includes a counter spindle with a speed of 7,000 rpm and a rapid traverse of 32 m/min. If you are looking to get high-quality turning capabilities, consider the UTIMAC ISOLA XD 38 II Siemens swiss type turning machine we have for sale. Contact us for further details. • Main spindle: • Max. bar capacity: 38 mm (42 mm optional) • Stroke (versions): H = 320 mm; N = 90 mm; NH = 90 / 160 mm • Rapid traverse: 32 m/min • Counter spindle: • Max. bar capacity: 38 mm • Stroke: 280 mm • Speed: 7,000 rpm • Motor power: 11 kW • Vertical tool plate axes X1–Y1: • Turning tools: 5 (16x16) Gkjdpfx Ajy U H Nnel Ssc • Standard rotating tools: 5 • Rotating tools for B-axis: 4 • Fixed spindle stations: 5 • Motorized tool power: 2.6 kW • Motorized tool speed: 6,000 rpm • Rapid traverse: 32 m/min • B-axis: • Angular adjustment: 145° (+90° / -55°) • Number of tools: 6 (3 ER16 + 3 ER11) • Motorized tool speed: 6,000 rpm • Motor power: 1.9 kW • HY2 version: • Tool stations: 8 (4 fixed + 4 motorized) • Coolant tank capacity: 230 L Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Condition of the machine – Very good Year of manufacture: 2014 All machines purchased from us come with a 12-month WARRANTY. Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg Gkedpfx Alowz Nmpj Sec

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 9,957 h, load capacity: 1,600 kg, lifting height: 4,710 mm, free lift: 1,630 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 3,590 kg, total length: 1,950 mm, drive type: Elektro, construction width: 1,050 mm, Electric 3-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Gedpjz R H Edefx Al Sekc Front tire size: 2 x 18x7-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 15x4.5-8 Rear tire condition: 0 - 20% Battery voltage: 48V Battery capacity: 625Ah Battery year of manufacture: 2015 Double auxiliary hydraulics, integrated side shifter, battery from 2015, blue spot, lighting compliant with StVZO (German Road Traffic Regulations).

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Gksdpfx Alsykrtpe Sec Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER MACHINE EQUIPPED WITH AN ADDITIONAL 5L WATER TANK Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 INCLUDED: 5L WATER TANK NEW 430mm PPL 0.5 disc brush 5L TENZI NORMAL fluid - FREE Gjdpfxjztcfas Al Sokc KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: used, ITEC Star Clean 23871 is a professional hygiene station designed to control personnel access to production areas in the food processing industry. The system provides automatic cleaning and disinfection of footwear, ensuring high hygiene standards before entering production zones. The unit uses rotating brushes to effectively clean and disinfect the soles and sides of footwear during passage. Automatic sensor activation ensures simple, safe, and hands-free operation. Constructed from high-grade stainless steel, the station offers durability and reliable performance in demanding industrial environments. It is ideal for food processing, meat, dairy, and pharmaceutical facilities where strict hygiene standards are required. Technical Specifications Manufacturer: ITEC Hygiene / Frontmatec Model: Star Clean 23871 Type: Footwear Cleaning and Disinfection Station Gsdpfx Aljzgqvas Sokc Material: Stainless Steel (Inox) Power Supply: 400 V, 3N/PE, 50–60 Hz Power Consumption: 0.75–1.25 kW Water Connection: 3/4” Throughput: 5–7 persons per minute Activation: Automatic sensor operation Application: Food, meat, dairy, and pharmaceutical industries

Condition: new, Year of construction: 2026, Metalclean P80 spray cleaning system in stainless steel 1-tank spray cleaning system with a rotating basket. Usable dimensions = D = 780 mm, H = 430 mm Load capacity / batch = 100 kg Godpfx Aeir Apvsl Sekc Tank volume = 130 liters Spray pressure = 3 bar Operating voltage = 3 x 400 V/N/PE 50 Hz Oil skimmer

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Gjdpfx Aoy Nfqmsl Sskc Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Gksdpfxsw Ewl Us Al Sec Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: good (used), KEN 2311-HOS Laboratory Dishwasher KEN 2311-HOS is a compact cleaning and disinfection unit. It is used for washing, disinfecting, and drying (optional) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology equipment, abdominal and tubular equipment, anesthesia and ventilation tubing, surgical shoes, as well as bottles, trays, and glassware. Several versions are available: single-door and double-door (pass-through) models. Pass-through machines are always preferred, as the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-contamination. ■ User-friendly control panel – ensures correct operation ■ Option for individual program selection. 4 programs as standard ■ Process indicator bar shows the progress of the program ■ Double temperature monitoring (EN/ISO 15883) Gjdpeiuzkmjfx Al Sokc ■ Connection option for 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Power connection 3 x 400 V, N, PE, 50Hz Connected load/fuse rating 10kW/16A Water connection Cold, untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot, softened water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water consumption (approx.) per cycle 13-14 l Pump capacity 370 l/min Clearance depth 2 doors 560 mm Clearance depth without center partition 510 mm Clearance width without center partition 510 mm Noise level approx. 59-64 dBa (sound pressure) Protection class IP 21 (not suitable for dishwashers) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed from a facility due to its closure and has been in storage since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or the instruments to further test the unit. Therefore, this unit is sold as is, in the condition as shown in the pictures. If you would like to test or inspect this unit before purchasing, please contact us at any time to arrange an appointment. You can find more new and used items in our shop! International shipping costs available upon request!