Used Climaveneta Necs/Q/B 0904 for sale (40,940)

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: 32003375, type of input current: three-phase, type of cooling: air, overall weight: 2,320 kg, input voltage: 400 V, total width: 2,220 mm, total length: 4,110 mm, total height: 2,150 mm, input frequency: 50 Hz, Climaveneta NECS/Q/B 0904 multi-purpose unit, air-to-water, air-cooled condenser, for simultaneous chilled and hot water production in a 4-pipe system. Year of manufacture: 2010. Serial number: 32003375. Cooling capacity: approximately 211 kW. Heating capacity: 234.2 kW. Power consumption in cooling mode: 85.23 kW; maximum electrical power as indicated in the documentation: 107.8 kW. Four scroll compressors, two refrigeration circuits, R410A refrigerant (charge indicated on the nameplate: 2 × 35 kg). Power supply: 400 V, three-phase, 50 Hz. Nedpfxoz Hqrle Abuswn Approximate dimensions (L × W × H): 4,110 × 2,220 × 2,150 mm. Weight as indicated on the nameplate: 2,320 kg. Exact operating hours not recorded. Condition: used equipment, already disassembled and stored in Covelas, Trofa. It was operational before disassembly, but without reaching full capacity and requiring maintenance. In circuit 1, an internal leak was identified in the expansion valve and an abnormal noise in the four-way valve. In circuit 2, the suction transducer is defective. Under current conditions, it is not possible to perform a load test. Some photographs show the equipment before disassembly; others show its current state in the warehouse. Visits by appointment only. Collection, lifting equipment, loading, and transportation are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 0-240-75-5616, functionality: fully functional, Equipment: CE marking, documentation/manual, SAWTEQ B-300 panel saw Cutting length: 3800 mm Nedpfoz Tt Eijx Abuewn Cutting width: 3800 mm In very good condition, selling due to replacement with a different model.

Condition: new, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, type of cooling: water, overall weight: 1,350 kg, input voltage: 380 V, total width: 2,560 mm, total length: 891 mm, total height: 1,810 mm, Geothermal water chiller by Climaveneta Mitsubishi Electric, water chiller with 233 kW capacity (with heat pump and heat recovery, year 2018, R-410A refrigerant, equipped with 4 scroll compressors, plate heat exchanger, dimensions: 2560x891x1810 mm (height), 1350 kg. Nedpfx Abeyvu Nfeuewn New units can be sold individually or as a lot of 5 (brand new, unused units).

Condition: used, Year of construction: 2022, operating hours: 1,700 h, PIŁA PANELOWA Producent: HOMAG Typ: SAWTEQ B-200 Optimat HPL200/38/22 Nwodozkmrfjpfx Abujn Rok 2022 Z załadunkiem only 1700 working hours !!!!

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Panel dividing saw Manufacturer: Homag Type: Sawteq B-200 Optimat HPL200/38/22 Year of manufacture: 2022 Technical data - Cutting length: 3800 mm - Width of feed table: 2200 mm - Number of clamping devices: 7 Node Abaqyopfx Abuswn - Feed rate: max. 80 m/min - Stepless feed rate - Panel thickness: min. 9.5 mm - Saw blade overhang: 95 mm - Saw blade diameter: max. 380 mm - Main motor: 9.2 kW - Scoring saw - Labeling manually via HOMAG PICA - Control system: CADMATIC 5, Homag POWER CONTROL V2 - CE marking - Operating hours: 1700h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2019, Panel dividing saw HOMAG SAWTEQ B-200 / HPP 200/38/32, manufactured in 2019. Cutting length 3,800 mm; saw blade overhang 65 mm; scoring saw; intelliGuide Basic; three air cushion tables; label printer. Collection possible from December 15th. Earlier collection is only possible by arrangement. Inspection by appointment. Dismantling, loading, and transport will be arranged. Nodo Adubfepfx Abuswn Price on request. Contact: DS-Maschinen – Owner David Schulz.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Nwjdpezmglkofx Abuon Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: excellent (used), Year of construction: 2020, Ref:11144. 2020 Horizon BQ-480 EVA Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Nedez Aklajpfx Abuswn Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr

Condition: excellent (used), Year of construction: 2018, used horizontal panel dividing saw Manufacturer: Homag Type: Sawteq B-130 (Optimat HPP130/32/32) Year of manufacture: 2018 Cutting length 3200 mm Cutting width (program slider travel) 3100 mm Nodpfsz R Sgzsx Abuewn Roller rail 1 * element, 10-track + 4 single-track Clamps 5 pieces Air cushion table 3 * 1800 x 500 Central blower 1 piece Technical data: Saw blade overhang 60 mm Saw carriage feed: forward 1-60 m/min, reverse constant 60 m/min Automatic cutting height; pressure beam height control Angular backstop, min. pressure width 0 mm; max. pressure width entire cutting length Main saw motor 5.5 kW with pneumatic saw lift Scoring saw motor 1.1 kW, motorized saw lift, electric adjustment Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 10 kW Labeling program with label printer PICA II 103 Power Control CADmatic 4 control system Optimization program CAD-Plan 4 "Single Saw" on the machine

Condition: excellent (used), Year of construction: 2020, HOMAG CABTEQ S-250 / MPH 450/25/07 carcass press, year of manufacture 2020. Carcass press for furniture manufacturing. Model: MPH 450/25/07. Nwodps Adub Ejfx Abuen Collection possible from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Disassembly, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner: David Schulz.

Condition: good (used), functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: automatic, bending force (max.): 135 t, working width: 3,050 mm, input voltage: 380 V, Equipment: emergency stop, foot remote control, lower tooling, upper tooling, For sale: Adira QHD-13530CB press brake, manufactured in 1995, with a bending length of 3050mm and a clamping force of 135 tons. Manual adjustment of the bending angle using a handwheel. Nsdpfo Afc S Ujx Abuewn Preliminary adjustment of the back gauge – electric, using +/- buttons; precise adjustment of the back gauge – manual, using a handwheel. Bending cycles – automatic or semi-automatic, controlled by foot pedals (up/down) or buttons requiring the use of both hands, as well as a "manual" mode. To avoid misunderstandings, the machine can be inspected and tested before purchase. Please ask any questions you may have to avoid any ambiguity.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Brother TC-32BN QT – Key Technical Specifications Manufacturer: Brother, Japan Model: TC-32BN QT Year of Manufacture: 2013 Control System: Brother CNC-B00 X-axis travel: 550 mm Njdpfs Abv Nljx Abuewn Y-axis travel: 400 mm Z-axis travel: 415 mm Maximum spindle speed: 16,000 rpm Tool clamping taper: BT30 Tool magazine: 26 positions Spindle motor power: 7.3 kW Through-spindle coolant: 70 bar NC rotary table: Kitagawa CKR160RY Chip conveyor: two-belt type, with filtration and a 540 l tank Machine weight: 4,600 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg Njdpfx Aboyw Ndmsuown SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: good (used), Year of construction: 1989, turning height: 1,275 mm, workpiece weight (max.): 16,000 kg, turning diameter: 1,900 mm, faceplate diameter: 1,600 mm, workpiece diameter (max.): 1,800 mm, overall weight: 27,000 kg, Max turning diameter 1900/1800 mm (facing/peripheral) Nodpfe Ad Hy Tex Abujwn

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-17-5078, PERMANENTLY INTEGRATED FUNCTIONS: 6 grippers 4 tables Right-hand machine Scoring saw motor power: 1.5 kW Saw blade projection: 80 mm Saw carriage speed: 130 m/min Main saw motor power: 11 kW Cutting line: 4300 mm Machine table in cutting line with air cushion Infinitely variable pressure beam control Labeling software MACHINE CONTROL: Control panel CADMATIC 5 ADDITIONAL INFORMATION: Nsdpsyg I Tdsfx Abujwn Data transfer via WLAN-USB Label printer

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3795, Equipment: clamp, Theisen & Bonitz TB Flex 304 QSM for brochure production, equipped with a stapling unit and three-side trimming. Further technical specifications will be added. Nedpfxe Adtc Uj Abuswn

Condition: used, Year of construction: 2012, overall weight: 4,000 kg, input voltage: 400 V, Equipment: documentation/manual, We offer this used MEBA Bio QZ 900 shredding system, manufactured in 2012, for sale. Manufacturer: MEBA Model: Bio QZ 900 Year of manufacture: 2015 Condition: used Category ID: 568 Type ID: 304 Machine type: shredding system, cross-flow shredder The machine was used as a shredder in a biogas plant. However, it can also be used for other shredding applications. Nodpfx Abjz Tfmfouswn If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: T102H00311, overall weight: 280 kg, type of input current: AC, total width: 700 mm, total length: 2,150 mm, total height: 1,010 mm, input voltage: 230 V, input current: 2 A, Morgana / Plockmatic BM350 brochure production system with SQF500 SquareFolder and FTR500 front trimmer For sale is a complete, fully functional Morgana / Plockmatic brochure production system for the professional production and processing of brochures. The system consists of: - Morgana / Plockmatic BM350 booklet maker / saddle stitch folding unit - 2 saddle stitch heads for flat wire stitching - Morgana / Plockmatic SQF500 SquareFolder - Morgana / Plockmatic FTR500 front trimmer The system enables complete brochure production in a continuous workflow: stitching, folding, spine pressing, and front trimming. The BM350 handles the stitching and folding of the printed sheets. The downstream SQF500 SquareFolder presses the brochure spine, creating a flat, square spine with a high-quality appearance. Subsequently, the FTR500 front trimmer performs a clean front trim of the finished brochure. Technical data and features: - Processing capacity BM350: up to 35 sheets / 140 pages at 80 g/m² - Processing of paper up to 300 g/m² - Paper format min.: approx. 206 × 275 mm - Paper format max.: approx. 320 × 457 mm - Suitable for A4, A3, SRA4, SRA3, and B4, among others - 2 saddle stitch heads - Flat wire stitching - SQF500 SquareFold / spine press module - FTR500 front trimmer - Power supply: 230 V / 50–60 Hz Nodpez Nga Esfx Abuswn - Dimensions of the fully assembled system: approx. 2,150 × 700 × 1,010 mm - Total weight: approx. 270 kg Year of manufacture / production data: - BM350: 01/2017 - SQF500: 01/2017 - FTR500: 12/2016 The complete system is therefore offered as a 2017 model year. Condition: used, in good condition, and fully functional. The system can be inspected and demonstrated in operation after prior appointment. Ideally suited for digital printing companies, copy shops, bookbinding companies, in-house printing departments, and companies involved in print finishing, for example, for the production of brochures, magazines, programs, price lists, and similar printed products. The system is preferably sold as a complete, integrated unit. Sale exclusively to businesses and entrepreneurs. The used system is sold in its current condition. The sale is made without any warranty. No guarantee and no returns.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Horizon BQ470 PUR, age 2009 only 2.2 million copies made new PUR hose new milling knives LCD GUI Horizon automatic setup Nwsdpfx Asz Thu Esbusn Maks. 320 × 320 mm Min. 145 × 105 mm capacity: PUR: max 1 000 C/h | EVA: max 1 350 C/h premelter 20 KG PUR in production excellent condition

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Nsdpjx Aqdcofx Abuown Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Nwodpfexv Ayvex Abuon Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Nwodpoxnb Hfsfx Abusn Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: excellent (used), Year of construction: 2010, Equipment: chip conveyor, documentation/manual, Brother TC-32BN QT Year 2010 Brother CNC control X-axis travel: 550 mm Y-axis travel: 400 mm Z-axis travel: 415 mm Nsdpfez S Iddox Abujwn Rapid traverse: 70 meters per minute Spindle speed: 12,000 rpm Number of tools: 26 Tool holder: HSK 40 Chip conveyor Coolant through spindle

Condition: used, Year of construction: 2011, Perfect binder Wohlenberg Quickbinder Year: 2011 The Quickbinder from Wohlenberg is intended not only for expanding smaller-sized companies making the jump to quality book binding applications, but also for large, industrial-scale book binding companies who can utilize the machine for the production of superior, high-quality samples and editions. Description: - Motorised setting - Colour monitor with touch screen: Navigator - Solo perfect binder - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - Hotmelt side glue unit - Rotary cover feeder - Nipping and pressing station - Belt delivery Optional available: Wohlenberg lay down delivery for connection to a conveyor system / three knife trimmer Description modified on Max. mechanical speed: up to 2.000 cycles/h Maximum size range (wxhxt): 430 x 320 x 70 mm Minimum size range (wxhxt): 110 x 105 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Nedpfszl Edpjx Abujwn

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm Nodpjzrpu Sefx Abuown coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor