Used Cronosstech H-Type 160 Ton Single Connecting Rod Eccentric Press for sale (92,353)

Condition: used, Year of construction: 1980, For sale is a robust mechanical eccentric press / stamping press from the manufacturer MGR. The machine is ideally suited for punching, forming, and pressing operations in the metalworking industry and comes from industrial use. Technical data: Manufacturer: MGR Type: 45R Bsdpfxey Unmbe Apvodd Year of manufacture: 1980 Pressing force: 45,000 kg (45 tons) Stroke: 230 mm Ram stroke: 80 mm Ram adjustable: 55 mm Adjustable stroke: 9 – 120 mm Motor power: 3.5 hp Voltage: 380 V Machine no.: 311860

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm Bdsdpfx Apsu Rwa Isvsd ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm Bdsdpfx Aoy Nd Svopvod hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1976, pressure 025 t Bdjdpfx Apoy Nd Spsved table-size 500 x 400 mm ram stroke - adjustable min/max 20- 120 mm throat 250 mm ram surface 350 x 250 mm strokes of ram per min. 120 shut height (stroke down, adjustm. up) 300 mm ram adjustment 60 mm tool shank hole (depth x diameter) 32 x 80 mm hole in the table 180 mm weight of the machine ca. 1,6 t Machine has adjustable table (150 mm).

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Bodpfx Ajzbvvvspvjdd Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Bsdpfsxwk E Aox Apvsdd Condition New Stock Number 2796 Working Width 1000 mm Stroke 380 mm Max Capacity 100ton

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Bjdpfjt Ei Hnjx Apvjdd Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: used, Year of construction: 1962, pressure 080 t throat 300 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 467 mm table surface area 710 x 560 mm hole in the table 240 x 115 mm table height over floor 800 mm ram surface 400 x 315 mm ram adjustment 80 mm power requirement 7,5 kW weight 5,1 t dimensions (WxDxH) 1,4 x 1,9 x 2,7 m SPECIAL DEAL Bsdpfx Ajyq Smijpvedd as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1962, pressure 060 t throat 220 mm stroke 6 - 94 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 340 mm table surface area 680 x 400 mm hole in the table 120 x 70 mm table height over floor 750 mm passage to the back 290 mm ram surface 240 x 240 mm ram adjustment 57 mm power requirement 3,7 kW weight 2,8 t dimensions (WxDxH) 1,5 x 1,5 x 2,2 m SPECIAL DEAL as is where is, WITHOUT additional work Bdjdpfx Apoyq Sl Sovsd free loaded to truck

Condition: used, Year of construction: 1961, pressure 063 t throat 270 mm stroke 8 - 100 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 200 mm table height over floor 800 mm Bdodpfx Aovuuc Repvjd ram surface 305 x 260 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,0 t dimensions (WxDxH) 1,3 x 1,7 x 2,35 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1957, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck Bdsdpfx Asvzxnwopvod

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Bdedpswp Nv Hofx Apved Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm Bdjdpfeykb Dqox Apvsd total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control - Current UVV inspection with braking time measurement Following the modernization, the machine is approved for manual loading operations on the open die.

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Bdedpfx Apoy Tptaoved Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz Bdsdpfx Apjdzp Trevod - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring Bjdji Db Ibepfx Apvodd - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Bdodpfx Asv Uraaopved Good condition

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device * Bdjdpfou Nfkljx Apved

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa Bdedpfx Aeu N Ddwjpvjd ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) Bdjdpfx Asu N Dfhjpvsd - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Year of construction: 1983, Technical details: Bjdpeu Nfizofx Apvjdd pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1969, Technical details: pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min distance table/ram: 300 mm Table dimensions: LxB: 440 x 620 mm passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. Bjdpfx Asu Nfkxspvedd The press is equipped with 2-hand control. *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t Bdsdpfx Aju N A Uuepvjd stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: Bsdpfou N A U Ijx Apvsdd The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: Bsdpfxju Nfg Hs Apvsdd pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D. *