Used Cross-Layer for sale (5,137)

Condition: ready for operation (used), Year of construction: 1992, A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible. Crjdpfowwvw Tox Ab Deg

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: Cjdpfxezp H R Es Ab Dsrg The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2009, condition: good (used), Technical Data: Format: min 145 x 200 mm; max 300 x 430 mm Stack height: max 50-300 mm Stack weight: max 18 kg Speed for strapped / film wrapped bundles: max 36 bundles/min Speed for loose bundles (only with Blocking Unit!): max 24 bundles/min Palletizing height (incl. pallet): max 1600 mm Description: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Equipment: Palletizer: · Simple palletizer (one line) · Product orientation at infeed palletizer (standard): längs Blocking unit: · Model: VB 95 · Serial Number: 446 · Infeed with flying cross (turning device) for bundles · Right hand palletizer (palletizing to the right of the infeed) Slip sheet dispenser: Empty pallet dispenser: · Model: PT · Serial Number: 246 Pallet conveying: Cjdpsnab Udsfx Ab Djrg · Pallet width (max): 1.000 mm · 2 additional buffer positions for full pallets: · Configuration of pallet conveying gerade All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Credpfohrmlgjx Ab Djg Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26180X.30 Serial Number blocking unit: 136 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26180X.40 Serial number empty pallet dispenser (pallet terminal): 78 Includes pallet conveying, reference-no: 26180X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side / längs Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26150X.30 Serial Number blocking unit: 75 Infeed with flying cross (turning device) for bundles Serial Number turning device: DK 5 Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT 80 Reference-# empty pallet dispenser (pallet terminal): 26150X.40 Serial number empty pallet dispenser (pallet terminal): 53 Includes pallet conveying, reference-no: 26150X.50 Conveying for a pallet width of 800 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Cedpfx Ashrmlceb Dsrg Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. Infeed with blocking unit & turning device. The palletizer builds single rows of bundles which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26001X.30 Serial Number blocking unit: 152 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With Slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26001X.40 Includes pallet conveying, reference-no: 26001X.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying mounted on floor Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Csdpfx Abohrigqo Djrg Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Color: Blue Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm Cjdpfx Abefv Hphj Djrg blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26027.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Crsdpohrmk Refx Ab Deg Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26027.40 Serial number empty pallet dispenser (pallet terminal): 132 Includes pallet conveying, reference-no: 26027.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: good (used), Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): straight Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26046.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26046.40 Includes pallet conveying, reference-no: 26046.50 Conveying for a pallet width of 800 & 1000 mm Cjdjhrmk Uepfx Ab Djrg Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request

Condition: used, Year of construction: 2013, Colour: Grey Weight: 2.000 kg - Details: Codpfxoyvf Epe Ab Djrg - └ Description: Machine is currently not working, possible problem with software - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4919 - Min. saw blade diameter[mm]: 440 - Max. saw blade diameter [mm]: 450 - Input table length [mm]: 4700 - Output table length [mm]: 2000 - Options: Automatic pusher system - Feed speed: Automatic - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 20 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg - Year: 2012 - Documentation available: No - CE marking present: Yes Csdpoyna Ezjfx Ab Derg - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Weight: 1.600 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Credpfsyf H H Hsx Ab Dog

Condition: used, Year of construction: 2005, total height: 1,200 mm, total length: 8,120 mm, total width: 850 mm, Colour: Grey Credpfx Asx A S Upsb Dsg Weight: 1.240 kg - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 535 - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 8120mm x 850mm x 1200mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total height: 1,700 mm, total length: 1,500 mm, total width: 1,200 mm, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 263989 - Max. saw width [mm]: 380 - Max. saw blade diameter [mm]: 550 Credpfx Aboxdl E Re Djg - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 14.5 - Power [kW]: 5.7 - Transport dimensions: 1500mm x 1200mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Colour: Grey Weight: 415 kg Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport weight [kg]: 415kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Crsdpfx Aewq U Dxjb Dsg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, maximum distance between units: 3.3 m two motors, 2.2 kW each blade tilt adjustable cutting angle in the range of -45/+45 degrees maximum blade diameter: 330 mm pneumatic clamping devices Codpfx Abszxpr Do Derg blade speed: 3765 rpm CE marking

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 10.7488 - Main motor power [kW]: 6.3 Cedpszmxvzofx Ab Dorg - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Cedpfx Aboypvdio Djrg Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 2003645, Year of construction: 2013, operating hours: 11,961 h, load capacity: 9,000 kg, lifting height: 4,500 mm, free lift: 580 mm, load center: 1,050 mm, fuel type: electric, mast type: mono, motor manufacturer: Hubtex, battery manufacturer: Heppecke, battery model: Nass-Batterie Aquamatic EUW, battery capacity: 465 Ah, battery voltage: 48 V, battery weight: 731 kg, fork carriage width: 200 mm, fork length: 2,100 mm, ground clearance: 75 mm, turning radius (outer): 2,650 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), rear tire size: 343X114, empty load weight: 4,335 kg, total length: 3,638 mm, total width: 1,650 mm, color: orange, Equipment: CE marking, UVV, head guard, Special design: see documents – product specification + EC declaration of conformity. Crsdpfx Abezwpp Hj Dsg Drive and steering motor requires repair. Spare parts package.

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Colour: Grey Weight: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6237 - Max. saw length [mm]: 6500 - Max. saw width [mm]: 400 - Max. saw height [mm]: 135 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 6700 - Output table length [mm]: 6000 - Options: Automatic pusher system - Voltage [V]: 415 - Current consumption [A]: 20 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg Credpfx Aewnh N Nob Dog - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2024, We offer for sale a modern PAOLETTI Salvacut 3000 automatic cross-cut saw, designed for high-performance and precise cutting of wood materials. This machine represents a powerful and efficient solution for automated cutting operations with high speed, accuracy, and reliability. Key Features & Benefits Manufacturer: Paoletti Energy S.r.l. Model: Salvacut 3000 Year of manufacture: 2024 Automatic cutting system for high productivity Suitable for industrial wood processing and production lines Robust and modern construction Technical Specifications General Voltage: 400 V Frequency: 50 Hz Installed power: 12 kW Saw motor power: 5.5 kW Cutting System Saw blade diameter: 500 mm Bore / thickness: 35 / 4.2 mm Cutting speed: 2880 rpm Minimum cutting time: approx. 0.3 s Material Capacity Max. cutting section: approx. 70 × 300 mm Max. workpiece length: approx. 5,100 mm Min. workpiece length: approx. 500 mm Min. cross-section: approx. 30 × 15 mm Performance & Feeding Maximum feed speed: up to 200 m/min Material feed direction: right to left (left to right on request) High-speed automatic processing Compressed Air & Extraction Air pressure: approx. 6–8 bar Air consumption: approx. 500 Nl/min Extraction capacity: approx. 5,000 m³/h Extraction speed: approx. 28–30 m/s Extraction connections: Ø120 mm and Ø100 mm Crodpfx Aezgr Sceb Dog Dimensions & Weight Main unit weight: approx. 2,000 kg Max. output sorting unit load: approx. 500 kg Working height: approx. 1,000 mm Operating Conditions Operating temperature: +5 °C to +40 °C Storage temperature: +5 °C to +40 °C Advantages High cutting speed and precision Reliable industrial design Suitable for continuous operation Efficient material processing with stable output quality Additional Information CE certified Modern machine (2024) – very good condition

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is an R. Beck multi-level gluing press in a robust industrial design. This machine is ideally suited for efficient carcass, frame, and panel construction, as well as for a wide range of gluing applications in carpentry and furniture making. The 5 independently operated press levels allow for the simultaneous processing of multiple workpieces, resulting in high productivity. Technical data: Manufacturer: R. Beck Maschinenbau Year of manufacture: 1997 Usable length: 2,000 mm 5 press levels Operating pressure: 6 bar CE version Machine no.: 270 Equipment: Pneumatic multi-level gluing press 5 press levels, individually selectable Pneumatic pressing Multiple clamping cylinders per level Even pressure distribution Control panel with individual control of the press levels Mobile base frame Robust industrial design Ideal for carcass, frame, and panel gluing Application areas: Furniture manufacturing Carpentry Joinery Carcass gluing Frame gluing Panel gluing Series production Condition: The machine is in used, well-maintained condition with the usual signs of wear and tear consistent with its age. Thanks to its robust construction, it is ideally suited for professional use in crafts and industry. Inspection and test run are possible at any time by appointment. Csdpfjzm Slvex Ab Dsrg Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system Cjdpfx Abjzuzcto Dsrg - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each Credpfjyv Ewmex Ab Dog - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw Crsdpfozkbmdex Ab Djg - Feeding system with transverse conveyors and automatic pusher - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.