Used Cts T-30/950 Ex/I for sale (95,868)

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller Dedpfx Anozd Rzwezekr LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion forklift Load center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Dkedpfx Anoztg Iljzjr Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options, and we will gladly provide you with a quote for delivery under favorable conditions. We also offer trade-in options for Linde equipment, even if you do not purchase a unit from us. The operating hours stated were recorded on the date of listing. Subject to prior sale, changes and errors. Clamp fork, side shifter, pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, full free lift, safety light, seat heating.

Condition: used, mileage: 750,000 km, power: 175 kW (237.93 HP), first registration: 05/2013, fuel type: diesel, overall weight: 12,000 kg, gearing type: automatic, emission class: euro5, Equipment: soot filter, tail-lift, Tail lift: ----Cooling unit: ----- Engine brake - air conditioning - tail lift - door - Carrier Supra 950 Suspension: Air suspension Dkedpfx Aneyxclmozer

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Dodpfx Ajy Hkd Honzjkr Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS TV-70/530 Climate Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Machine type: Climate test chamber / Shaker chamber Test chamber volume: approx. 530 liters Dedpozd Uq Aofx Anzjkr For sale is a used climate test chamber from CTS Clima Temperatur Systeme GmbH. The system was developed for combined temperature and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and stress tests. Note: Shaker/vibration exciter is not included in the offer. Technical data Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Scope of supply 1x CTS TV-70/530 climate test chamber Scope of supply as shown in the pictures Condition Used Optical condition as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. Scope of supply as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Djdpjvz Hqmjfx Anzekr Weight 230 kg Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Dodpfx Ansvz Hqtezskr

Condition: ready for operation (used), Siemens 6SL3040-1NB00-0AA0 Numeric Control Extension NX15.3 SN T-C32072198 Version A, used, in good condition, fully functional, delivery as shown in photos. Dkedpfx Ansx Euy Nezer

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Dkjdpfx Ajzmrmysnzsr Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Dkjdjzmqx Iopfx Anzsr Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 340 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Dsdpoywg Sbofx Anzjkr - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,147 h, load capacity: 3,000 kg, lifting height: 6,580 mm, free lift: 2,080 mm, fuel type: electric, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,250 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Double pedal Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tire size: 23x10-12 Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tire size: 200-50-10 Rear tires condition: New Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: AIM Djdpfx Aoxvt Dlsnzskr Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection. If you have any further questions, please do not hesitate to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to provide you with a quote for leasing & financing as well as delivery at competitive rates. Trade-in of Linde equipment is also possible—even if you do not purchase a machine from us. Displayed operating hours were recorded as of the listing date. Subject to prior sale, modifications and errors excepted. Sideshift, fork positioner, Stabau S11-ZVI-30-S-01 integrated 3rd valve, 4th valve, rear work lights, front work lights, heating, road traffic approval (StVZO), fully enclosed cabin, full free lift, safety light, seat heating,

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg Dkodpjziycbofx Anzor For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 16 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Dsdpezmklhefx Anzskr Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C Dksdpfx Ajzh D E Ronzsr approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 4.950 kg Axle 1: left 5 mm right 5 mm Dedpfx Anezkldaszokr Axle 2: left 10 mm right 10 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: used, Year of construction: 2008, machine/vehicle number: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/hThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. Since it combines a UHT sterilization system with a high-pressure homogenizer, it delivers optimal processing for various food and beverage applications. Moreover, its design allows easy integration into existing production lines, making it a practical choice for manufacturers.General FeaturesThis system operates at a capacity of 12,000 liters per hour (l/h), providing both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, ensuring a balance between proven reliability and advanced engineering. Furthermore, the system’s robust construction guarantees long-term durability, reducing the need for frequent maintenance.Tetra Pak Steritube UHT SterilizerThe Tetra Pak Steritube UHT sterilization unit applies high temperatures to ensure the microbiological stability of liquid products. Because it features a controlled heating system, it keeps the sterilization temperature between 95°C and 138°C, depending on production requirements. In addition, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial stages and 30, 45, 60 seconds for advanced stages, allowing precise thermal treatment control.To optimize heat transfer, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an inlet temperature of 5°C and an outlet temperature between 85°C and 95°C, which provides controlled cooling before further processing. Another key advantage is that its design allows seamless integration with homogenization systems, CIP (Cleaning-in-Place) units, and aseptic packaging lines.Tetra Pak Alex 30 HomogenizerThe Tetra Pak Alex 30 homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Because it processes between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products.Additionally, the system features cone valves and pistons made of stainless steel or solid ceramic, ensuring durability and resistance to wear. It also includes grooved and V-type seals, which provide effective sealing and reduce maintenance needs. Since the homogenization process occurs in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals.Moreover, an ABB M3BP315SMB 4 motor powers the unit with 132 kW output, operating at 380V and 50 Hz, which guarantees reliability and high performance. At the same time, a 7.5V DC thermistor monitors the operating temperature to prevent potential malfunctions. For enhanced safety, the system includes a 24V DC door safety lock and a crankshaft speed sensor to prevent overloads.ConclusionThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h offers an efficient solution for thermal processing and homogenization of liquid food products. Thanks to its high performance and reliable construction, manufacturers can optimize their... Dkedpov Di Itjfx Anzor

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Dsdpezg Ty Ujfx Anzjkr Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Djdpfozg Ty Isx Anzskr Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Dkedjzg Twaopfx Anzjr Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2000, loading space width: 40 mm, total length: 9,400 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Year of construction: 2000, Equipment: ABS, = Additional options and equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Drum brakes = Notes = 2000 Van Hool 20FT/30FT ADR (EX/II, EX/III, FL, OX, AT), ABS/EBS, SAF axles with drum brakes, 1st axle is a lift axle, 385/65-R22.5 tires (L: 4/13/8mm; R: 6/14/7mm), unladen weight 3,950 kg, max. gross weight: 39,000 kg, Dutch registration. = Further information = General Information Mileage: 228,518 km Registration number: OG-37-KJ Axle configuration Axle make: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 25%; Tyre tread right: 40% Rear axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 90% Rear axle 3: Tyre size: 385/65 R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 45% Weights Unladen weight: 3,950 kg Payload: 35,050 kg Gross weight: 39,000 kg Functionality Body brand: Van Hool 3B2015 Condition Dedpsyngx Uofx Anzjkr General condition: average Technical condition: average Visual appearance: average Further information Please contact Arne Honingh for more information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2001, loading space width: 40 mm, total length: 9,290 mm, total width: 2,470 mm, suspension: air, wheelbase: 7,610 mm, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = - Air suspension - Drum brakes = Remarks = 2001 GROENEWEGEN 20FT/30FT ADR (EX/II, EX/III, FL, OX, AT) chassis, ABS, ROR axles with drum brakes, 385/65-R22.5 tyres (L: 5/7/14 mm; R: 6/7/13 mm), unladen weight 3,920 kg, max. weight: 41,000 kg, Dutch registration. = Further information = General information Mileage: 228,518 km Registration number: OG-84-NJ Axle configuration Axle make: ROR Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 40% Dsdoyngxzjpfx Anzekr Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 90%; Tyre tread right: 80% Weights Unladen weight: 3,920 kg Payload: 37,080 kg Gross vehicle weight: 41,000 kg Functional Bodywork make: Groenewegen 30CC-14-27 Condition Overall condition: average Technical condition: good Visual condition: average Additional information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Siemens 6SL3040-1NB00-0AA0 Numeric Control Extension NX15.3 SN T-D36132246 Version C, used, in good condition, 100% functional, delivery scope as shown in photos. Dkjdpox Euzaefx Anzer

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 21,738 h, load capacity: 3,000 kg, lifting height: 3,350 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Standard Transmission: Hydrostatic/Dual pedal Condition: Ready for use and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 20 - 40% Description: For sale to dealers only / Export without UVV inspection. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik.com. We will be happy to provide you with a quote for leasing & financing, as well as delivery at favorable conditions. Trade-in of Linde equipment is also possible – even if you do not purchase a device from us. The operating hours stated were recorded at the time the listing was created. Subject to prior sale, changes and errors. Turntable, fork positioner, Dkedpfx Aszi Huqjnzjr Mayer rotating clamp fork 3rd valve, 4th valve, rear work light, front work light, heater, STVZO compliant, full cabin.

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm control Mazatrol type Mazatrol T plus turning speeds 35-3500 U/min spindle passage 88 mm Tool changer 20 Pos. Spindle capacity 35 KW centre distance 1029 mm x-travel 450 mm z-travel 1029 mm weight of the machine ca. 7,5 t - Spindle nose: A2-8 - Axis C - Maximum feed: X = 12 m/min - Y = 10 m/min - Z = 18 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Djdpfoyqu Hxex Anzekr apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team