Used Dürr Prüfstation for sale (19)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system Lsdez Ai Tpspfx Ah Sjru >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, DÜRR DÜRR testing station for adhesive applicators DÜRR testing station for adhesive applicators, including (5 robot-controlled adhesive applicators) DÜRR testing station (DÜRR in-house design) for the automotive industry Weight: 1200 kg Lsdsz Nflyspfx Ah Soru Type: DÜRR testing station for adhesive applicators Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data; information provided is without guarantee!) We will gladly answer any further questions you may have over the phone.

Year of construction: 1999, condition: used, Loading height: 850mm, basket dimensions: 670x480x300mm, max. batch weight: 150kg, exhaust air volume: 200m³/h, throughput: approx. 8-10 batches/h, rinsing temperature: 70-80°C, max. drying temperature: 130°C, number of immersion tanks: 2, power supply: 3x400V/50Hz, connected load: 58kW, system height: 2300mm, height of side structure: approx. 2200mm, left system section: approx. 1000mm, main system section: approx. 2800mm, right overhang: approx. 400mm, length: 3200-4200mm, width: 1800mm, height: 2300mm, operating hours: 43,294h, components: working chamber, immersion tank I, immersion tank II, oil separator, drying unit, filter. An on-site inspection is possible. Ledo Adt Ikspfx Ah Ssru

Condition: like new (used), Year of construction: 2025, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. Lrjdpfx Ahjz Ebwpj Sju German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, Year of construction: 2013, functionality: fully functional, Dürr RAM Station Double barrel pump Lsdsu Eqkvspfx Ah Soru Pumps and dosing concept MPDK X20: Type L10011525 - Pneumatic gun PVA08/40 - Heatable hose KMHH6007/040 - Electric dosing unit ED150/7 The device is unused!!!

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Ljdozzn Hxspfx Ah Seru Machine Benefits Technical Machine Benefits • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 • Automatic feeding Extra Information Machine still under power

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) Ljdpfezgckcex Ah Seru (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2004, operating hours: 77,034 h, overall weight: 11,000 kg, compressed air connection: 6 bar, heating capacity: 150 kW (203.94 HP), power: 192 kW (261.05 HP), Cleaning System Manufacturer: DÜRR ECOCLEAN Model: MEGA 76 W Year of manufacture: 2004 Technical Specifications: - Batch size (max., approx.) 1,340 x 480 x 480 mm - Batch weight approx. 200 kg - Throughput approx. 3,000 kg/h - Cycle time: approx. 4 min - Loading height: 460 mm - Heating capacity: 150 kW - Heat-up time: approx. 3 hrs - Required compressed air: 6 bar - Fresh water: 3 bar - Operating hours: approx. 77,034 h - Total power requirement: approx. 192 kW - Machine weight: approx. 11 t Lodpfx Ahjzhxm Aj Soru - Space requirements: approx. 3.60 x 10.10 x 3.25 m In our assessment, the machine is in good used condition and can be viewed while powered on by appointment. Accessories, tools shown in the photos, and clamping devices are included in the scope of delivery only if specifically noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell the item to another party in the meantime!

Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible. Lrsdpjxwcvgsfx Ah Sou

Condition: reconditioned (used), Cleaning agent: hydrocarbon or modified alcohol. Ljdoznhgropfx Ah Soru

Condition: good (used), Year of construction: 1999, Aqueous cleaning system in good condition with vacuum dryer (pump not included). Available immediately. Lrodpfxod Nnvhs Ah Sou

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Overall dimensions: Width: 700 mm Depth: 550 mm Height: 890 mm Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V Lodpfx Ahey Udfmo Ssru The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.

Condition: used, Year of construction: 1998, operating hours: 67,904 h, input current: 262 A, heating capacity: 275 kW (373.90 HP), power: 122 kW (165.87 HP), Cleaning System Manufacturer: DÜRR ECOCLEAN Model: Spezial 39S Year of manufacture: 1998 Technical Specifications: Ledpfx Aozid Dvoh Ssru - Cleaning medium: Per - Capacity: 15,000 L - Heating capacity: 275 kW - Cooling capacity: 43 kW - Footprint: 20 x 10 m - Operating hours: approx. 67,904 h - Connected load: 122 kW - Supply voltage: 3 x 400 V - Amperage: 262 A - Batch size LxWxH (max., approx.): 2,250 x 1.00 x 1,150 mm - Batch weight (approx.): 1,000 kg - Throughput (approx.): 2 batches/h - Cycle time (approx.): 30 min - Loading height: 1,010 mm - Distillate output (approx.): 1,000 l/h Dimensions and weights: - Overall dimensions (L x W x H): 15,000 x 8,200 x 6,000 mm - Vacuum chamber, usable (L x W x H): 1,630 x 3,500 x 1,510 mm - Product weight: 200 kg In our assessment, the machine is in good used condition and can be inspected while powered on by appointment. Accessories, tools shown in the photos, and clamping devices are included in the scope of delivery only if specifically noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell the item to another party in the meantime!

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 -Drive: 220 V / 370 W -Connection input: Ø 32 mm -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg Lrsdpfx Ahoupbcvs Sou

Year of construction: 2023, condition: used, Anthos A5 / Class A5 is a dental treatment unit with a dental chair. 0300 1 50679 Anthos A5 International Serial number 711B0038 19,962.30 € 0310 1 9021377 Patient chair A2.5L RL wide included in the package 0320 1 829346 Standard headrest included in the package 0330 1 831843 Wide upholstery, blueberry/purple 132 included in the package 0340 1 829154 Left armrest included in the package 0350 1 9021477 Pneumatic brake included in the package 0360 1 9021416 6F syringe, angled included in the package 0370 1 9021387 Light turbine unit included in the package 0380 2 9021398 Light motor i-MMr L LED included in the package 0390 1 9021438 ZEG u-PZ 7 E with light included in the package 0400 1 9021455 Asymmetrical tray table included in the package 0410 1 829383 Sprayer heater included in the package 0420 1 829204 Assistant element, 3 holders, DG arm included in the package 0430 1 612043 Spray mist extraction unit included in the package 0440 1 612045 Saliva ejector included in the package 0450 1 829334 Mouthwash basin, glass, manual included in the package 0460 1 829143 Dürr mouthwash basin valve included in the package 0470 1 443132 Smooth suction hoses included in the package 0480 1 829264 Wet suction unit included in the package 0490 1 829362 Valve for central wet suction unit included in the package 0510 1 829215 Hygiene container SHS included in the package 0520 1 9021460 Power pedal included in the package 0530 1 829278 Venus plus L Led No-Touch included in the package Former new price Total: 56,494.30 € Ljdsztxzdopfx Ah Soru

Condition: good (used), Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm -Weight: 0.3 kg Lsdpfofm T Ewox Ah Sjru

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 704 mm, controller model: FANUC SERIES 31 i-MODEL A, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS TRAVEL DISTANCES X1-axis: 180 mm X2-axis: 180 mm Y1-axis: ±45 mm Z1-axis: 704 mm Z2-axis: 620 mm E2-axis: 720 mm Rapid traverse X/Y/Z-axis: 30 m/min SPINDLE 1 Lredpfxeym Ai Hj Ah Sou Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed for driven tools: 8,000 rpm Number of tool turret stations 1: 12 Number of tool turret stations 2: 10 All tool positions are driven MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Tool holders (as shown in the photos are included) External reference: Dürr

Condition: used, Year of construction: 2000, Fully automatic machine to affix promotional inserts Equipped with: Books pile feeder Feeding Measuring book height Opening cover Counting/opening Tearing Feeding promotional material Separating promotional material Adjusting promotional material Cutting promotional material Gluing promotional material Sticking in Pressing Delivery Technical data: Max. size: 316 x 216 mm Min. size: Ledpfxjy Syr Dj Ah Soru 90 x 60 mm Max output: 1200 pieces/hour Thickness 3 – 25 mm Promotional inserts: single/folded sheets, thinly bound products (max. 1,5 mm thick) Dürrer promotional/explanatory video:

Condition: used, Year of construction: 1997, Fully automatic index cutting machine Equipped with: Feeding Opening Counting/cutting 1 Counting/cutting 2 Printing station 1. colour Printing station 2. colour Delivery Technical data: Max. size: 185 x 130 mm Min. size: 50 x 60 mm Book thickness max. 15 mm (depending on product) Binding category: all standard binding sorts Cover bendable (no hardcover) Cut form angular cut Types Printing European/Arabic index combined indexes double and multiple indexes Printing: one or two colours letters and words Ledpey Syulsfx Ah Sjru Dürrer promotional/explanatory video: