Used Dendro Maskin Schweden Zh for sale (416)

Condition: good (used), Centering in front of creel or other saws. Lateral adjustment. Centering rollers. Lifting and lowering trough. Dodpfx Alsmhgguszjch Ideal also for model.

Condition: used, functionality: fully functional, control type: manual, 3-Roll Round Bending Machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Type: PV 7 H Serial Number: 804, overhauled in 1987 Dsdpfxozba Ate Alzech The machine has a very robust design and was only used for single-layer bending. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Taper bending device Upper roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a platform can be purchased for use around the machine.

Condition: ready for operation (used), Load capacity: 1000 kg Lifting range: 85 - 650 mm Fork length: 1150 mm Fork width: 160 mm carrying width: 510 mm Total length: 1500 mm Total height: 1250 mm Dcsdped Ax I Dsfx Alzsh

Condition: used, 3-roll plate bending machine Manufacturer: Luna Model: 8266 20/25 Machine No.: 2202 Working range: 2000 x 2.5 mm sheet thickness Swing-out top roll Power supply: 3-phase, 16 amps Dcsdpfx Asyw S N Selzoh

Condition: used, Year of construction: 2002, Max. working pressure: 7.7 bar, volume approx. 280 m³/min, input power 824 kW /// Drive motor: model AMA 400S2L BSH, 1,000 kW / 5,500 V / 121 A / 50 Hz / 2,969 rpm, weight approx. 3.5 tons /// Centrifugal compressor: model ZH 10,000-5-7, max. input 1,737 HP, input 2,969 rpm, max. output 12 bar Dedpsym Twnofx Alzoch

Condition: new, Deltronic HZ 9788 ZH 24-DCYD72 Electronic 2-point display SN131074 - unused, 100% functional, delivery as per photos Dsdpfx Aey Np Nmjlzoch

Condition: new, Deltronic HZ 9788 ZH 24-DCYD72 Electronic 2-point display SN131075, unused, 100% functional, delivery as per photos. Dcjdpey Np Ntsfx Alzsh

Year of construction: 1990, condition: ready for operation (used), Haul length: 1155-3500mm, blank width: 530-2400mm, creasing height: 300-2400mm, creasing length: 410-1600mm, creasing width: 150-1340mm, flap width: 35-50mm, max. format: 7000x2400mm, folded: 3500x2400mm, connected load: 20kVA, length: 15,000mm, width: 8000mm, height: 5000mm, with documentation. An inspection on site is possible. Dcjdpoy Sv S Tjfx Alzsh

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Mafell Hand Planer ZH 245 Ec ABSOLUTELY LIKE NEW 230 Volt 2500 Watt 0-4 mm Dcedpoyt Di Uefx Alzsh 13.2 kg with new replacement belts Transport possible at additional cost!

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Dcedpfx Asx Szm Aslzjh Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: used, Year of construction: 2003, functionality: fully functional, KUKA KR 60L30/2 robot complete with central hand ZH 3 Djdsy Rkpwspfx Alzech Year of manufacture: 2003 Payload: 30 kg Reach: approx. 2429 mm Controller: KRC2 Equipped with KUKA central hand ZH3 Spare parts are constantly available from stock. The robot is fully functional and can be inspected at any time. 2-week commissioning warranty. No further warranty.

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Dodjuqdzdjpfx Alzjch Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: refurbished (used), PRICE ON REQUEST! Price on request: The price for the products offered is not stated directly, but must be requested. Condition of the products: The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.02). Delivery and packaging: The products are delivered in a special box and the shipment is insured. Dedsral R Tepfx Alzoch Central hand exchange: It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without exchange on request. Warranty: A warranty of 12 months is offered, and there is an option to extend this to 18 months, but at an additional cost. Stock: The supplier has more than 100 central hands in stock, various models are available. Express overhaul: A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours after delivery. Repair service: In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear and tear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Fixing oil leaks: We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: All worn components are carefully replaced to extend the service life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: Experienced team of robotics experts Fast diagnosis and repair Use of high-quality spare parts Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), PRICE ON REQUEST! > used & tested completely overhauled, all wear parts renewed - completely measured - gear backlash axle 4 - 0,02 WM Djdpfxjg A Itqj Alzoch axle 5 - 0,02 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty - 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Condition: refurbished (used), functionality: fully functional, load capacity: 240 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair Dedsrqgfkopfx Alzjch - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: refurbished (used), KUKA wrist ZH 210/240 Foundry - used & tested completely overhauled, all wear parts updated - completely confused - Operation game Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - KUKA wrist new adjustment - Long test 8 hours at 100% load - Delivery in a special box (protected shipping) - Central trade in exchange Dodpjgz Tcijfx Alzjch (without exchange on request) - Transmission recovery of axles 1-6 - 12 months value added 18 months possible on an extra charge possible On stock more than 100 central hands on stock, various models. Ask a question! Also a express overhaul of your KUKA Central Handheld - From delivery 48 - 72 hours. In addition, we also repair the ABB handgelenke.

Condition: as good as new (ex-display), PRICE ON REQUEST! Dodog A Iucopfx Alzsch - as good as new - completely measured - gear backlash axle 4 - 0,01 WM axis 5 - 0,015 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Condition: refurbished (used), PRICE ON REQUEST! - used & tested completely overhauled, all wear parts renewed Dedpfx Alsg A Iuyozoch - completely measured - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,01 WM - Central hand readjusted - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists

Year of construction: 2021, condition: new, PRICE ON REQUEST! - NEW - unused - completely measured - gear backlash axle 4 - 0,005 WM axis 5 - 0,005 WM Dcodpfsg A Ivdex Alzsh axle 6 - 0,005 WM - Central hand readjusted - Endurance test 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists

Condition: refurbished (used), PRICE ON REQUEST! - 5 x used & tested completely overhauled, all wear parts renewed - completely measured - gear backlash axle 4 - 0,02 WM axle 5 - 0,02 WM axle 6 - 0,02 WM - Central hand readjusted Djdeg A Iv Ejpfx Alzech - Endurance test 8 hours at 100 % load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul of axles 1-6 - 12 months warranty 18 months possible for extra charge IMMEDIATELY more than 100 central hands in stock, different models. Just ask! Also an express overhaul of your KUKA central hand possible - from delivery 48 - 72 hours. In addition, we also offer the repair of ABB wrists.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030748, load capacity: 240 kg, This is a KUKA central hand for KUKA KRC2 KR 210 or KR 240 industrial robots. Part no.: 00-106-447. The central hand comes from stock inventory and has not been used. However, it shows minimal storage-related marks. Djdjxuta Ropfx Alzjch

Condition: like new (used), functionality: fully functional, load capacity: 180 kg, This is a KUKA central hand for KUKA KRC2 KR150 and KR180 industrial robots. Part no.: 00-106-446 The central hand comes from stock and has not been used, but may show signs of storage. Dcjdjxuubpjpfx Alzjh

Condition: used, KUKA AG Central Hand KR360 R2830, 00226914, ZH 360 4 Model: 00226914 Type: ZH3604 Condition: Used General information: Robotic wrist / Axis group 4-6 Heavy-duty, precise subunit for the hand axes A4, A5 and A6 Serial number: 003296 Paintwork: KUKA standard paint (orange, similar to RAL 2003) Suitable for: KUKA KR 360 R2830 Dcjdpew Ex Idjfx Alzoh Removed from Kuka KR360 R2830 Without oil (drained)

Condition: used, Year of construction: 2017, functionality: fully functional, working width: 200 mm, Linear, automatic bottom, double wall, and 4/6-corner Maximum speed: Up to 200 m/min (stepless adjustment) Paperboard: 350 – 800 g/m2 Dcsdpsxvpt Aofx Alzoh Corrugated board: E/B flute Box types: Linear, double wall, automatic bottom, and 4/6-corner Folding paths: 1st fold 180°, 3rd fold 135°, 2nd & 4th fold 180° Electrical voltage: 380V

Condition: refurbished (used), functionality: fully functional, 2 pieces of fully overhauled ZH 150/180 for KRC 2 Dedpsw Ilnbefx Alzsch Price is per piece