Used Dilo Ud-Ii/25 for sale (17,294)

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Kedpfx Asxtpq Nocpedu

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Ksdpfezhntrox Acpedu

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers Kdjdpfeuv Eg Hex Acpsu

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wooden input length min./max. 800 - 2500 mm Kjdpfx Acsz Dh S Rjpedu Timber widths min./max. 40 - 150 mm Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2020, 2020 Haas ST-25 CNC Slant Bed Lathe & Tooling Package Haas Autogrip 3H-H12 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Maximum Cutting (Varies With Turret) Ø381mm. Bar Capacity Ø76mm. Axis Traverses 'X'=236mm, 'Z'=527mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,400rpm (22.4kW Motor). Spindle Nose A2-6. 12 Station Turret. Power On Hours 1,979. S/No. 3119435 (2020). With Coolant System (Tank Capacity 208L), Marposs Tool Setting Arm, Tailstock, Footswitches, Signal Tower, Tooling Package (Turning Tools, Jaws, Collets & coolant Fixings) & Manual. Machine Foot Print W3,630 x D2,290 x H2,340mm. Weight 4,536kg. Kedpfxez Rqmrs Acpjdu

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW 1 x crank press with one ram 16 t Kjdpfx Acjmi Rpiepedu 1 x crank press with one ram 25 t

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 Kedpfx Acex D R Rfjpsdu This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Kdedszp Rhhspfx Acpeu

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Kdedpfozil S Iox Acpsu Supply voltage: 380 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Type of machine: QuickTurn Nexus 250-II Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Tool holder: BMT Speed range: 4.000 1/min Kedpjy I Uvisfx Acpedu Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment Kdjdpfx Acevaatfspou -Foot switch used, in good condition

Condition: used, Year of construction: 2008, 2008 MAZAK QTN-450M-II Nexus CNC Turning Centre with MAZATROL Matix Nexus CNC Control Maximum Swing Ø845mm. Maximum Machining Diameter Ø584mm. Distance Between Centres 1,000mm. Axis Travel 'X'=340mm, 'Z'=1,070mm. Maximum Spindle Speed 2,000rpm (37kW Motor). Maximum Rotary Milling Speed 4,000rpm. 12 Position Turret. S/No.201914 (2008) Any Bidder MUST and CAN ONLY USE the Baker Hughes Approved Contractors to Work Onsite. Please see the Essential information tab for more details. With Coolant System, Chip Conveyor, Traveling Steady & Oil Mist Extraction Unit. Weight 13,000kg. Kedpfx Acoz Rqlbepjdu

Condition: good (used), Year of construction: 1986, turning diameter: 1,260 mm, * Distance between centers: 11000 mm Kdedpouh Slkofx Acpsu * Roll diameter: max. 1260 mm * Max workpiece weight: 22.4 T

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm Kdjdpfx Acjy Raiyopeu back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: ready for operation (used), Year of construction: 2012, operating hours: 13,550 h, functionality: fully functional, turning length: 3,000 mm, turning diameter: 920 mm, spindle speed (max.): 10,000 rpm, spindle bore: 230 mm, type of input current: three-phase, total height: 3,937 mm, total length: 8,931 mm, total width: 3,277 mm, overall weight: 31,700 kg, Model: Integrex e-670H II Control: Mazatrol Matrix 2 Year: 2012 Cutting Dia: 920mm Distance Between Centre: 3000mm Spindle Speeds: 1600 RPM Spindle Bore: 230mm Kdjdoz S Ndxspfx Acpju Milling Speed: 10,000 RPM Milling Power: 37KW Tool Change Capacity: 80 Total Cutting Time:13550 RPM NOTE: Machine Has No Tailstock Dimensions: 8931 x 3277 x 3937 (approx.) Machine Weight: 31,700 KGS (approx.)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516301Y00704, Year of construction: 2021, operating hours: 5,441 h, load capacity: 2,500 kg, lifting height: 3,170 mm, mast type: duplex, overall weight: 4,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 3,170 mm Mast height: 2,400 mm Mast type: Duplex Fork length: 1,200 mm Minimum fork width: 200 mm Maximum fork width: 1,060 mm MACHINE DETAILS Drive type: electric Battery type: 4 PzS 620 Battery year of manufacture: 2021 Kdsdpoz Nixdsfx Acpeu Battery capacity: 620 Ah Battery voltage: 80 V Battery tray length: 1,030 mm Battery tray width: 705 mm Battery tray height: 785 mm Operating hours: 5,441 h Dimensions & Weight Dimensions (L x W x H): 2,450 x 1,200 x 2,400 mm Shipping weight: 4,500 kg Shipping packages: 1 EQUIPMENT Side shift Documentation available

Condition: used, Year of construction: 1983, turning diameter over bed 1790 mm turning diameter over slide rest 1250 mm turning length 5000 mm faceplate 1250 mm workpiece weight 45 t control Siemens type System 8 T mm turning speeds 1,1-300 U/min total power requirement 72 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Kdjdpfx Aoy D A D Tjcpju About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, maximum load weight: 29,352 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, loading space volume: 102 m³, Equipment: ABS, VEHICLE NUMBER: 2814 EXTERIOR EQUIPMENT: * Galvanized frame * Sliding tarpaulin, neutral, without lettering/stickers * Additional tarpaulin tensioner at the front * Steel corner supports at the front and rear * Sliding roof Schmitz Safety Roof (Edscha) * Lifting roof with stanchion lifter * Body with adjustable height at the front: 7 x 50mm / at the rear: 4 x 50mm * Ferry equipment for solo/unaccompanied transport * Reinforced HD frame at the front * Underrun protection, bolted, FERRY type with sliding skid * Trailer information system Smart-Board with axle load display * Tarpaulin rope * Steel rear impact guard * Document box Kedpfxewibi Ss Acpodu TECHNICAL FEATURES: * Rotos axles with disc brakes * Air suspension with anti-roll bar on the first axle * Tires 435/50 19.5 * Tread depth in mm: 1st axle: 11/11, 2nd axle: 8/8, 3rd axle: 7/7 * Lashing points in the outer frame * Lashing eyes: 7 pairs of 2 tons and 11 pairs of 5 tons * Pallet stop on both sides * Certificate for load securing EN 12642 Code XL, Daimler 9.5, beverages * Reinforced cargo floor * EX/II approval * Unladen weight 6,648 kg * Fifth wheel height 925mm * TÜV/MOT: 12/25, Next inspection: * Example lease-purchase: €279 per month, term 36 months, 10% down payment (can also be your used vehicle), 10% final payment. * Delivery to your location possible. Trade-in/Leasing/Financing. We can make it happen!

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Kodpjvy It Tsfx Acpedu Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Kedpfx Aozun T Ejcpodu

Condition: like new (used), functionality: fully functional, machine/vehicle number: EX-006-S25, Year of construction: 2022, operating hours: 20 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, compressed air connection: 10 bar, input frequency: 60 Hz, power: 9 kW (12.24 HP), We offer this as new CEAD S25 LSAM Extruder, year of construction 2022. Model: S25 Extruder Serial number: EX-006-S25 Input phases: 3 phases Input voltage: 400 V Input frequency: 50-60 Hz Input current: 32 A Power: 9 kW Short-circuit current rating: 10 kA Air pressure: 6-10 bar Air pressure: 87-145 psi Recommended RCD: 30 mW Pellet drier and feeder are included. Almost 2 tons of Airtech Dahltram® C-250CF pellets are included + purging compound. Kdsdjy Nk S Nopfx Acpju If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Kodpfx Acozvwnbjpedu Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter Kdsdpfozzrwbex Acpju 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: used, functionality: fully functional, Year of construction: 1996, machine/vehicle number: ROD397XX/999, DEMAG KBK overhead crane with dimensions of approximately 22 x 5 m (2 x 5 m span) Load capacity / lifting capacity: 2 x 250 kg – 0.25 tons Technical data of the system: Overhead crane system with Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Including 2 bridge cranes, each with a capacity of 250 kg Including 2 x 250 kg Demag DK+DC chain hoists (the latter is a more recent model) The crane is disassembled and immediately available Used condition, see photos Kodpfsz Tc D Iox Acpodu Item location is 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125 kg - 1600 kg Please feel free to request a quote for your overhead crane, specifying the load capacity and dimensions.

Condition: used, mileage: 632,779 km, power: 280 kW (380.69 HP), first registration: 09/1996, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 17,000 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, differential lock, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, Lg. house, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window right, sun visor, air horn, switch 16, ABS (anti-lock braking system), retarder, constant throttle, power take-off, central lubrication system, differential lock, driving lamp, rotating beacon, storage box, leaf suspension, U-protection, environmental badge red Wheelbase: 3600 mm 2x 13t axles, rear axle H7 I=4.03, ABS, brake pad wear indicator, differential lock rear axle, Voith secondary retarder R115 high drive, headlight cleaning system, additional sound insulation, additional heat insulation, flame system, automatic daytime running lights, central lubrication system, flexible diagnostic system (FDS), engine brake with constant throttle, double NA MB 124-11b/1c flange+MPA, M speed. VIN: WDB6581491K144337! Ksdpfx Aevhidcjcpodu EPS gearshift with clutch pedal! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .