Used Distributor for sale (372)

Condition: used, This listing is for a Scientific industries Distruptor Genie SI-D266 With timer Hodpsxzh Ngofx Andsnu

Condition: used, Year of construction: 2010, functionality: fully functional, Gietz FSA 870 Compact high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Top FSA 870 Compact specification High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : non stop delivery Hnsdpfxez Hw Tvo Andeu Fully reconditioned by exclusive distributor for Gietz AG , Switzerland in UK

Condition: reconditioned (used), Year of construction: 2004, Gietz FSA 870 S high speed foil stamping , embossing and die cutting machine Hsdjz Hxakepfx Andsnu Offered fully reconditioned by exclusive Gietz UK distributor Max format 870 x 560 mm : max speed 6,000 sheets / hr Low hours run High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : standard delivery

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: SG1CH1S001, number of ink cartridges: 9, color channels: 7, number of print heads: 8, resolution (max.): 1,200 dpi, total length: 3,640 mm, total width: 4,210 mm, total height: 1,750 mm, counter reading (color): 124,000, year of last overhaul: 2025, type of input current: three-phase, input current: 32 A, input voltage: 380 V, Equipment: raster image processor, HP Latex R1000 Hybrid Printer Hjdpfxoz Nc Sce Andenu We are offering for sale an HP Latex R1000 hybrid printer, which combines revolutionary latex print quality with the ability to print on both rigid and flexible media. The machine is in very good technical condition, has been regularly maintained, and is ready for immediate operation. Key Specifications: Manufactured: December 2021 Print Counter: 124,000 sqm Technology: HP Latex (featuring the whitest white ink on the market that does not yellow) Configuration: Hybrid solution (rigid boards and roll-to-roll) Condition: Very good, fully functional, operated in a clean environment Main Advantages: Versatility: Prints on everything from PVC sheets, dibond, and acrylic to self-adhesive vinyls, banners, textiles, and corrugated cardboard. Quality & Eco-friendliness: Water-based latex inks are odorless, certified for indoor applications (schools, hospitals, children's toys), and highly scratch-resistant with photorealistic print quality. Service History: Maintained under full service by the official distributor (HSW) throughout its operation. Package Includes: HP Latex R1000 printer Roll-to-roll printing accessories, rigid board loading/unload tables, and RIP software The machine has been out of active production since March 2025, but it is maintained in an operational state with regular startups and cleaning.

Condition: used, functionality: fully functional, Year of construction: 1994, operating hours: 14,700 h, axle configuration: 4x4, power: 77.23 kW (105.00 HP), number of seats: 2, number of cylinders: 6, motor manufacturer: Perkins, gearing type: mechanical, Equipment: air conditioning, cabin, hydraulics, lighting, power assisted steering, rear power take-off, trailer coupling, front tires 100% worn, rear tires 50% worn, 3 mechanical distributors, air suspension seat, air conditioning, front ballast weights 15 x 45 kg, mechanical reverser. Hnedpez I Tzrofx Andju

Condition: new, Blade Block / Distributor Block for Siemens SWT-3.6-107 Onshore For sale are four new, unused Siemens Blade Blocks / Distributor Blocks, type ZCH 565227, suitable for Siemens onshore wind turbines in the 2–4 MW power class, including the SWT-3.6-107. The Siemens ZCH 565227 is a central hydraulic module of the pitch system and is responsible for the precise, rapid adjustment of the rotor blade pitch angle. This assembly is a critical safety- and performance-relevant key component, which plays a significant role in yield optimization, load regulation, and operational safety of the wind turbine. As a hydraulic distributor block, the component is fully integrated into the plant’s control architecture and communicates directly with the main control system. Due to the high mechanical and hydraulic loads, only OEM components of the highest manufacturing and engineering quality are used here. The ZCH 565227 type is used in several current Siemens wind turbine models and is considered a critical component for avoiding unplanned downtime. Technical Data: • Manufacturer: Siemens • Type / Part Number: ZCH 565227 Hnsdpfx Asx Tftiondju • Designation: Blade Block / Distributor Block • Application: Pitch System • Compatible Models: incl. Siemens SWT-3.6-107 Onshore • Power Range: approx. 2–4 MW Condition & Scope of Delivery: • Condition: New, unused, in original packaging • Availability: 4 units immediately available • Delivery: Europe-wide shipping possible These blade blocks are ideal as strategic spare parts to ensure plant availability or for planned maintenance activities. For technical inquiries, serial number verification, or a prompt transaction, we are at your disposal.

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar Hjdsyx Dfnopfx Andsnu -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting Hsdpfjyx Ddqex Andjnu -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain Hodozu A D Eepfx Andsnu - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. Hsdpfx Aoz Ng Nyendjnu 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. Hodpfx Anjzu Nm Hjdsnu * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic for automatic cycle KW6.6 / 9 HP (S6) electrospindle teleservice system cable remote control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatically retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max. 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity test kit incl. FILTRAGLASS ECO-BOX CNC grinding coolant water treatment unit incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter system approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection on-site 7-8 bar (480 Nl/min) Dismantling/removal to be carried out by the buyer Hodpfxjw H R A Ns Andonu

Condition: excellent (used), Year of construction: 2017, Socket distributor, portable distributor, solid rubber distributor -Manufacturer: Bals, solid rubber distributor type 524446 -4x: earthed socket 16A 230V Hnedpfxeivum No Andsu -1x: CEE socket 16A 400V -1x: CEE socket 32A 400V -1x: CEE socket 63A 400V -Protection class: IP44 -Transport dimensions: 400/340/H350 mm -Weight: 15 kg

Condition: used, Auger diameter: 35 cm Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Hnsdpfexz R Rajx Andju Infeed height: 175 cm

Condition: used, Year of construction: 2015, functionality: fully functional, cutting width (max.): 3,210 mm, cutting length (max.): 3,200 mm, overall weight: 1,945 kg, type of input current: three-phase, total width: 3,920 mm, working width: 3,210 mm, total length: 5,100 mm, input voltage: 400 V, input frequency: 50 Hz, The Kongsberg C64 is a used digital cutting table manufactured in 2015. It is in good working condition and has been regularly serviced by an authorized distributor. With a working area of 3,210 × 3,200 mm, it is designed for precise cutting, milling and finishing of large-format materials. Hnodpfx Anjzz Igxsdju The machine is equipped with a 3 kW milling unit, an i-camera system, eight vacuum zones, a workstation, the QuickRelease system and a range of tools for cutting, milling, V-notching and processing self-adhesive vinyl. The machine is sold without a conveyor system and is in good working condition.

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm Hjdpfxezzz N He Andsnu - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Hnsdpfx Anozzrutsdsu Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, mileage: 23,300 km, power: 44 kW (59.82 HP), first registration: 07/1960, fuel type: gasoline, color: red, driver cabin: other, gearing type: mechanical, Year of construction: 1960, Vehicle location: Bovenden, Doka, work lights, rotating beacon, leaf suspension Superstructure: LF 8/TS fire-fighting vehicle incl. Bachert portable pump If you have any questions, please call ! Hnsdpfx Ajvhh E Sjndju Color: red Synthetic leather: dark red / brown 2nd hand H license plate possible Original German cardboard letter, operating instructions, service certificates, internal certificate and history folder are available. The vehicle was extensively restored for over €50,000.00! 4x4, body Carl Metz GmbH Karlsruhe according to DIN 14530, incl. various accessories such as 1 fire pump, nominal flow rate 800l/min, nominal delivery head 80m, water column speed nominal power 2,800rpm, transmission ratio 1:1, incl. various accessories on hoses, pumps, trailer coupling test mark, M787 license plate OG LC 971H, various hose distributors, jet pipes, water jet pump. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Index MS42C HBF rod guide Oil distributor Hnedpfefdr R Usx Andeu Flaps with tensioning screws

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Hnjdpsxp Ntvofx Andeu Photos show machine in production before reconditioning

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Hsdjz I Tm Ijpfx Andonu Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) General Description: Hnodpfx Aey Edlbjndou A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets,  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Condition: used, This listing is for a SAS Super80 Air Sampler The unit is in full working condition and is ready for immediate release. The SAS Super series (by SAS / Bioscience International, also referenced under other distributors) are impaction‑type microbial air samplers. They draw a known volume of air through a sampling head so that airborne microorganisms are impacted onto an agar contact plate (or Petri dish) for subsequent incubation and colony counting. These instruments are commonly used in cleanrooms, pharmaceutical manufacturing, hospitals, and other controlled environments to assess airborne microbial contamination. Good combination of high airflow + relatively compact unit; allows efficient sampling of large volumes in minimal time. Wide usage and long track record (models from this family have been used since the late 1970s/80s) which implies reliability and a mature support ecosystem. Flexible head options (aluminium, stainless steel, resin), choice of plate types (contact plates or standard Petri dishes) in some variants. Hsdpfx Aoxv Abasndenu Strong traceability / data capture features, which are important for regulated environment

Condition: used, Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo Hnjdpfx Anjirf Eyodju -Hydraulic fitting: T-distributor 2 1/2" -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, Hnjdpfx Anszt Hmzjdsu • wood, • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.