Used Dreher Grip Feed for sale (12,005)

Condition: used, material width:304,8 mm material thickness:0,12 - 2,2 mm feed length:304,8 mm clamping force of fastening pincer:850 N clamping force of moving pincer:4410 N feeding force:650 N weight of the machine ca.:0,15 t dimensions of the machine ca.:0,7 x 1,05 x 0,6 m Dodpfocxxrxsx Abajkn

Year of construction: 1996, condition: used, material width 150 mm material thickness 2,5 mm feed length 485 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Dkedpeul D Slofx Abajn

Year of construction: 1996, condition: used, material width 100 mm material thickness mm feed length 285 mm total power requirement kW Dsdeul D Sropfx Abajkn weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Dsdpsdzqltjfx Abajkn Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Year of construction: 1977, condition: used, Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg Dkodpfx Aetigw Nobaon

Condition: like new (used), Year of construction: 2024, Band width: max. 76mm Feed length: max. 76mm Band thickness: 0.076 - 1.91mm Speed: max. 195 strokes/min at full feed length Feed force: 205N with mechanical control valve or optionally as in the photo with electric valve (24V or 230V) also available in: - Band widths from 38...400mm - Feed lengths up to max. 300 mm Dodpfxsxaqvo Abaokn - Band thicknesses 0.05...3.18 mm

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Dkjdpe Ea U Hjfx Abasn Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Condition: used, Manufacturer: Dreher Condition: Used Dkodsyzyy Hepfx Abaen Stock number: 3175 Additional features: The line consists of: Dreher brewing system with 2 vessels Type: KBA500 Year of construction: 2006 Boiler: 550 litres Heating: 42 kW Control system: KBA basic 3x Dreher fermentation tanks Type: GW500 Year of construction: 2006 Capacity: 520 litres With Dreher ZKV120 cooling system 3x Dreher / Brovarni dosing tanks Type: 500 L CCT Year of construction: 2017 Capacity: 500 litres 1x Dreher bright tank Capacity: 1000 litres 6x Dreher combination tanks Type: KT500 Year of construction: 2006 Capacity: 500 litres 5x FIB beer tanks Type: 70200503 Year of construction: 2022 Capacity: 540 litres Auxiliary equipment, including: - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - Bottle washing station - Bottle filling machine - Corking machine - 45x 20 litre kegs - Workbench - Double sink

Condition: used, Colour: Grey Price: On request Shredder Dreher S26 Type: S26/26 Dodpfx Asyfguqobajkn No.: K4727 Hopper opening: 250 mm x 400 mm Motor: 4kW 380Volt 8.3Ampere - Documentation available: No - CE certificate present: No - Serial number: K4727 - Main motor power [kW]: 4 - Number of shafts [pcs.]: 1 - Opening width [mm]: 250 - Opening length [mm]: 400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1977, material width:300 mm no. of straightening rolls:13+2+2 straightening roll diameter:60 mm Dkodpfscxxn Ijx Abaen

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t Dkjdpfjcxxx Rjx Abaon dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed Dkjdpey Tig Hefx Abaon

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Djdoy Th Enspfx Abajkn Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Dkjdpfxevg Iqxo Abajn Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Extended machine accessories Insertion aidLoop bridge

Condition: used, Year of construction: 1997, material width 300 mm coil weight 2 x 1,25 t material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm Djdpfx Abjyx Iknjaekn speed 3 - 30 m/min feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls

Condition: used, Year of construction: 1995, material width 300 mm Dsdpjwc U Izofx Abaskn coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Year of construction: 1997, condition: good (used), Lifting capacity, horizontal: 500 kg Vertical: 360 kg Width: 900 mm Height: 1000 mm Dkedpjy Sxxpjfx Abaen Depth: 900 mm Net weight: 57 kg Condition: good, second-hand

Condition: used, Shredder Dreher S20/20 No.:K2740 Funnel opening: 310mm x 340mm Djdpfxswh I Uxe Abajkn Motor: 3kW 6.3 Amps 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, - Documentation available: No Dodpfxjwh Nacj Abaekn - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Dksdpfjwh Naiex Abaen Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, opening width: 650 mm, power: 36.77 kW (49.99 HP), broyeur à lames . 2 lames fixes / 5 lames mobiles moteur 37kw Dksdpeq R Sqlofx Abasn largeur utile 700 - rotor plein grille 12 mm (possibilité de changer la maille) sortie par ventilation ou visse

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Rotor knives: 3 Dkedpfxjyr Tzks Abajn Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 13110, Rotor diameter: 260 mm Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Dsdpfxoyr Tvbs Abaekn Inlet cross-section approx. 400 x 340 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13222, Rotor diameter: 260 mm Rotor width: 820 mm Rotor blades: 5 rows of 2 blades each Stator blades: 2 rows of 2 blades each Dsdpsyr Tuwofx Abaekn Inlet cross-section approx. 820 x 260 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Rotor width: 520 mm 4-knife rotor Dodpfoyr Tq Esx Abaskn 2 rows of stator knives Infeed opening approx. 340 x 520 mm Drive motor: 18.5 kW