Used Dreizler High Frequency Ignition Device for sale (33,432)

Condition: used, High-frequency ignition device, heating, gas and oil burners Gusdpfx Aod Iy Nrjn Iog -Type: E4718/54 -Dimensions: 85/70/H40 mm -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Ground fault monitoring, adjustable. Gedpfx Aezxwx Een Ijug

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Guodpfx Aned Dc Une Isg Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Year of construction: 2026, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: FL80, High frequency welding machine Revised and tested 2026 Arm 80cm Single electrode 20x900mm Plexiglass hand guard protection Gedpjy Dtz Aefx An Ieug Power 12KW Absorption 15KVA Control panel on movable external arm ITL9-1 triode tested and working 12 months warranty

Year of construction: 2025, condition: new, functionality: fully functional, High frequency generator Schirmacher HS25000 The HF generator is used to generate a high-frequency electromagnetic field, which in a connected HF production device can be used to - Heat and weld thermoplastic plastics, - Dry paper products, textiles, wood and similar materials, - Heat plastic granulates, rubber and other materials. Technical data Operating frequency: 27,12 MHz Output power: 25 kW Power supply: 3 x 400V, 50Hz, Rated power 46 kVA Control: Generator: SPS Siemens S7 / Control electronics: SE68 Triode: RS3026 CL, alternatively ITL 12-1 Anode voltage: Full load 9,1kV, no load 10,4 kV Anode current: Full load 3.800 mA, no load 800 mA dimensions (WxDxH): 1.200 x 1.200 x 2.000mm Commerical infromation Condition: new machine, from delivery stock – zero operating hours Manufacturer: Heinz Schirmacher GmbH, Trittau Availability: Available from stock, more than one unit in inventory Warranty: Available upon request Machine highlights Fast commissioning through modular design – flexible integration into various production processes and adaptation to different tools. Highly precise control – exact power delivery and consistently high welding quality. Highly dynamic HF regulation prevents extremely rapid flashovers in the welding process. Gujdpfjx U Trpex An Ijg Electrode protection – integrated into the generator to safeguard both machine and tool. Automation-ready – suitable for use in automated manufacturing processes with the capability to integrate into existing systems. Visits possible by arrangement.

Condition: used, functionality: fully functional, High frequency welding machine Kiefel KH 6000 C-Press height adjustable Gjdpov A Uddofx An Ieug Generator Kiefel G 20000 SB Table size 1350x800 mm

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Gusdpfsqu Ubuex An Ijg

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. Guedpfxjzn N Ece An Iog • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar Godsfdkb Eopfx An Ioug - HD reel with 20m hose - Radio remote control on request

Condition: excellent (used), High frequency spindle Make Precise Type SC 60121 Speed 7500 - 30000 Hertz 250-1000 Gujdpfxsu Numvj An Isg Volt 88-250 13 kw Diameter 120 mm Total length 420 mm Weight 22 kg

Condition: used, Available quantity: 4 units “Removed from a production facility of an automotive supplier, professionally dismantled” Designation: DC high-voltage/insulation test module GH-200.11A Manufacturer: STAHL Prüftechnik Application: Checking and determining voltage and insulation strength Technical data: - Test voltage (setpoint specification): 100 ... 7500 V DC - Control deviation/measurement accuracy: 0.1 % ± 2 V of the setpoint - Rise rate (ramp): 50 V/s - 30 kV/s - Discharge internal resistance: 100 MΩ - Measurement range: 0 ... 7500 V DC - Output isolation: ± 1500 V max. voltage difference between HV 0 output and PE connection - Trigger current: 1 µA ... 10 mA - Measurement ranges: - Range 1: 0 ... 10 mA - Range 2: 0 ... 200 µA - Resolution: 1 nA - Measurement uncertainty: - Range 1 (10 µA to 10 mA): < 0.5 % of the measured value ± 0.5 µA - Range 2 (0.5 µA to 200 µA): < 1.0 % of the measured value ± 0.01 µA - Discharge energy: < 350 mJ Interfaces: Gujdpfjzg Ihgsx An Iog - Ethernet (Modbus protocol) - Optional: Profinet, EtherCAT - Optional: 2-channel safety circuit Special features: - Safety current limited to 10 mA - Precise insulation measurements in the GΩ range through guard connection - Compact industrial design for installation in automated testing applications - Voltage supply with wide-range input

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm Gedpowgi Siofx An Isug - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Gujdpey Ra Ddefx An Iog Weight: 28 kg

Condition: used, Technical details: Gjdpfx Aevb A Ubon Ieug turning speeds: 10000 U/min output: 22 kw weight approx.: 20 kg transmission ratio: 1: 4,3 high speed spindle with 1 : 4,3 ratio, MK 5 spindle taper and collet chuck for tooling. Misc. parts in wooden case. *

Year of construction: 2001, condition: used, functionality: fully functional, SECOND-HAND H.F. GENERATOR ELETTRONICA CAVALLO MOD. GAF 50KW - CE RULES - Double exit Guodpox Rrlgefx An Isg - Year 2001

Year of construction: 2001, condition: used, machine/vehicle number: 1634, SECOND-HAND HF GENERATOR ELETTRONICA CAVALLO MOD. GAF 30 - CE RULES - Power 30kw - S/N 1634 - Year 2001 Gjdpozclmgofx An Ijug

Condition: used, Hydraulic machine vise, high-pressure clamping device KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Godjd Amwispfx An Ieug Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guide rail height: 140 mm - 2 clamping ranges adjustable via pins - Rotating plate Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg Good condition

Condition: good (used), Year of construction: 2021, REF: MM6468 1 x MKN FlexiChef 150L high-performance multifunctional cooking pan. Suitable for soups, stews, ready meals, meat, fish, rice and pasta, bakery and confectionery products. Manufacturer - MKN Maschinenfabrik Kurt Neubauer GmbH & Co KG. Type - FCEKMP133DR-G20037. Serial number – 21542551. Date of manufacture – 2021. Electrical requirements - 380-415 V / 50 hz / 3 phase. Power - 34 kW. Water pressure - 200-600 kPa. Overall dimensions - 1600mm long x 910mm wide x 1020mm high. Gedpozn Rbfofx An Ieug Machine weight - 390 kg.

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. Guodpfx Anjd Nnb Rj Isg 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, - Possibility of opening water drainage channels for PVC and Aluminum Profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in an angled position Gedora Nrqjpfx An Ijug - Pneumatic profile clamping system - Fully automated system operation - More efficient and long-term operation with high frequency motors (18000 rpm) - Vibration-free and better quality grooving due to high frequency motor

Condition: excellent (used), Year of construction: 2012, operating hours: 1,142 h, lifting height: 1,580 mm, free lift: 1,580 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,860 mm, color: other, GVW: 760 kg Guedpfxoz Altxo An Isg Lifting capacity: 2.000 kg NEW BATTERY CELLS 24V 2PzS 180Ah with filling system, Built-in 220V high-frequency charger, double-deck, Initial lift, Lift capacity lower forks 2000 kg, Lift capacity mast forks 800 kg, Fork size 1150 x 570 mm, Tandem forkwheels,

Condition: excellent (used), Year of construction: 2015, operating hours: 1,077 h, lifting height: 1,580 mm, free lift: 1,580 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,860 mm, color: other, GVW: 760 kg Lifting capacity: 2.000 kg NEW BATTERY CELLS 24V 2PzB 210Ah with water filling system, Built-in 220V high-frequency charger, Doppelstck, Initial lift, Capacity lower forks 2000 kg, Capacity mast forks 800 kg, Fork size 1150 x 570 mm, Tandem fork wheels, Guodpfx Aez Alluen Isg

Condition: excellent (used), Year of construction: 2015, operating hours: 1,033 h, lifting height: 1,580 mm, free lift: 1,580 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,860 mm, color: other, GVW: 760 kg Lifting capacity: 2.000 kg Gsdsz Allzepfx An Ioug NEW BATTERY CELLS 24V 2PzB 210Ah with water filling system, Built-in 220V high-frequency charger, Doppelstck, Initial lift, Capacity lower forks 2000 kg, Capacity mast forks 800 kg, Fork size 1150 x 570 mm, Tandem fork wheels,

Condition: excellent (used), Year of construction: 2015, operating hours: 1,120 h, lifting height: 1,580 mm, free lift: 1,580 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,860 mm, color: other, GVW: 760 kg Lifting capacity: 2.000 kg NEW BATTERY CELLS 24V 2PzB 210Ah with water filling system, Built-in 220V high-frequency charger, Doppelstck, Initial lift, Capacity lower forks 2000 kg, Capacity mast forks 800 kg, Fork size 1150 x 570 mm, Tandem fork wheels, Gusdpsz Altlofx An Isg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,139 h, lifting height: 1,580 mm, free lift: 1,580 mm, fuel type: electric, fork length: 1,150 mm, total height: 1,860 mm, color: other, GVW: 760 kg Lifting capacity: 2.000 kg Gedpfxoz Alt Ee An Ijug NEW BATTERY CELLS 24V 2PzB 210Ah with water filling system, Built-in 220V high-frequency charger, Doppelstck, Initial lift, Capacity lower forks 2000 kg, Capacity mast forks 800 kg, Fork size 1150 x 570 mm, Tandem fork wheels,