Used Dunkes Hz 315 for sale (12,726)

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s Pjdpfx Aezrppvsbuogu feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Pgedpfsv Rwu Uex Abuou Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Shut height (stroke up): 830 mm Table area: 620 x 520 mm Table opening: 150 mm Table height above floor: 600 mm Ram area: 150 mm Pgedpfozypmwex Abuou Downstroke speed: 120 mm/s Upstroke speed: 30 - 450 mm/s

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Psdpfxoh Uhqye Abuogu Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t Pgodpstxdmwsfx Abuju clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station *

Year of construction: 1978, condition: used, pressure 100 t throat 380 mm stroke 400 mm power capacity 22 kW dayligth 600 mm Pgedpfslp U Dpox Abuou ram surface 600x500 mm table surface area 720x600 mm weight of the machine ca. 9 t

Condition: used, Year of construction: 1982, Technical details: Psdsrdlgispfx Abujgu pressure: 2,5 t

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm stroke 100 mm total power requirement 7,5 kW Pgjdpfxot Hw Ezs Abuou weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Year of construction: 2018, condition: ready for operation (used), overall weight: 4,100 kg, total width: 1,810 mm, total height: 2,780 mm, pressing force: 76 t, product length (max.): 7,060 mm, stroke length: 160 mm, Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details. Pjdpfxez E Igwo Abuegu - Max. Installation Height: 885 mm- Min. Installation Height: 725 mm- Throat Depth: 250 mm- Max. Ram Stroke: 160 mm- Ram Speed "DOWN" (AB): 2 - 30 mm/s- Ram Speed "UP" (AUF): 15 - 68 mm/s- Press Table Height above Floor (with / without oil pan): 730 / 700 mm- Usable Shaft Length: 3000 mm- Usable Shaft Diameter: ø 120 / ø 170 mm- Straightening Bridge Length: 2000 mm- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each- Main Pump Drive Power: 7.5 kW- Network Type: L1-3/N/PE (TN-S)- Frequency: 50 Hz- Operating Voltage: 400 V~- Control Voltage: - VDC- Connected Load: 7.5 kW / 9 kVA- Nominal Current: 14.5 A- Supply Line / Fuse: 32 A CEE / 32 A- Hydraulic Tank Capacity: approx. 280 Liters- Oil Quality: DIN 51502/51524 HLP 46, ISO 3448 (DIN 51519) ISO VG 46- Machine Dimensions (Width x Depth x Height): approx. 7060 x 1810 x 2780 mm- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg- Emission Sound Pressure Level Lpa: 78.5 dB(A)- Uncertainty Kpa: 8 dB(A)

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg Psdpfx Abjt Hwrzoujgu dimensions of the machine ca. m

Condition: used, Year of construction: 2007, offer consists of: Theisen & Bonitz booklet maker tb flex B 315 VP mit tb 304 QSM - collator tb flex B 315 VP - stitching and folding device tb sprint 304 QSM collating unit type 315: - v-belt drive - suction is adapted to pile height - double-, jam- and misfeedcontrol - safety device - bins: 15 - format: min. 7x10cm, max. 35x50cm - paper weight: 18-800g/qm - capacity: max. 3500 cycles/h Stitching and folding device tb sprint 304 QSM Equipment: - Motorized format setting - 2 Hohner stitching heads - Friction free Knife Fold (cloth system) - Automatic layer thickness adjustment - Automatic re-press - Front cutting device for cutting to 4 cm, sections greater than 1.5 cm - Head and foot trimming each from 3 to 20 mm at about 80 pages, 80 g / sqm - - - - Stream delivery Technical details: - Speed: max. 2.800 cycles / h Pgedpfx Abs Afhpxeuou - Power: 400 V, 50 Hz We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Year of construction: 2026, Holzkraft SCM Format Panel Saw minimax si 4 - 315 / 32 with Scoring Unit Exhibition machine sold at a special price Pgjdpfxo Afat Aj Abuju With pivoting saw blade and format sliding table made of anodized aluminum Article number: 5504832VR Solid work table made of heavy-duty, ribbed gray cast iron – for maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precise format sliding table made of anodized aluminum – easily movable with high-quality ball bearing system Hard metal guide rails – for long-lasting precision and minimal maintenance Pivoting gray cast iron saw unit with double segment guide – exact zero-point pivoting for maximum cutting accuracy Solid parallel fence with round bar guide Equipped with adjustable eccentric clamping device Integrated miter fence on the sliding table – for quick and precise miter cuts Scoring unit with belt drive TECHNICAL DATA Dimensions and weights Weight (net) approx. 640 kg Connection for dust extraction Dust extraction port diameter 120 mm Dust extraction port diameter saw blade guard 60 mm Installation information Transport width 980 mm Machine body length 1900 mm Machine body width/depth 840 mm Space requirement length 7235 mm Space requirement width/depth 4410 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths Working area length 1600 mm Working area width/depth 2300 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Mains frequency 50 Hz Output power (motor power) 5.0 kW Rated duty cycle drive motor S6 Duty cycle drive motor 40% Sliding table and table Format sliding table length 3200 mm Format sliding table width 360 mm Format sliding table height 175 mm Table length 940 mm Table width 560 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3200 mm Rip fence length 3200 mm Saw blade tilt 90 - 46° Max. cutting height 90° 100 mm Max. cutting height 45° 71 mm Explanation of max. cutting height: Independent of the scoring unit Diameter of saw blade 315 mm Explanation of diameter of saw blade: Independent of the scoring unit Saw blade speed 4000 min⁻¹ Scoring unit Diameter of scoring saw blade 120 mm Scoring saw blade speed 9000 min⁻¹ EQUIPMENT Equipment Scoring unit: Driven by the main saw blade motor via flat belt, with saw blade Ø 120 mm Anodized aluminum format sliding table ✔ Handle for sliding table ✔ Material roller on the rip fence frame ✔ Saw parallel fence with round bar guide Fences: Two professional folding fences Rip fence shoe ✔ Eccentric clamp ✔ Table extension ✔ Table lengthening ✔ Saw blade guard ✔ Location: in stock, 54634 Bitburg - immediately available -

Year of construction: 2022, condition: like new (used), Celeros HL250-200-315 Centrifugal pump 2022, Unused, rev 1480 min, flow rate 495 m3h, with manual Pgjdo Ad Rh Ispfx Abueu

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Pgjdpfodzp T Njx Abuou Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 2 t Bearing surface: approx. 580 × 120 mm Machine number: P89-6761 MACHINE DETAILS Manufacturer: Dunkes Type: DN2 Machine type: Metal press Length: 1,000 mm Width: 750 mm Height: 1,700 mm Weight: 400 kg EQUIPMENT Matching punch Pgjdpj Ad E Uiofx Abuou

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2975/1999, functionality: fully functional, operating hours: 20,637 h, power: 48 kW (65.26 HP), input voltage: 400 V, pressing force: 100 t, stroke length: 820 mm, operating speed: 470 mm/s, reverse speed: 447 mm/s, table width: 1,000 mm, table length: 720 mm, table height: 950 mm, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 910 mm, oil tank capacity: 2,100 l, total length: 3,100 mm, total width: 2,300 mm, total height: 4,850 mm, overall weight: 17,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, The machine was used in single-shift operation for prototype production, with CNC 50 control, impact damping, drawing cushion force of 400 kN, stroke of 150 mm, drawing cushion area of 600x550 mm, and regular UVV inspections. Includes a light curtain and a mechanically adjustable depth stop. Features hydraulic die clamping. Dismantling and transport are not included in the price. Pedpfxjzkrl Dj Abuegu

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm Pgsdpjzh Edbofx Abuju - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: good (used), Year of construction: 1999, machine/vehicle number: H99-2989, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 63 t, stroke length: 420 mm, operating speed: 92 mm/s, reverse speed: 430 mm/s, table width: 620 mm, table length: 520 mm, table height: 1,000 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 610 mm, clearance between the columns: 800 mm, oil tank capacity: 700 l, total length: 1,400 mm, total width: 1,900 mm, total height: 3,800 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, For sale: hydraulic drawing press, in good condition, including drawing die (force 250 kN, stroke 150 mm, drawing die area 300 mm x 420 mm). UVV inspections (occupational safety inspections) were carried out regularly, most recently in 2024. The machine was used in single-shift operation for prototype production. Price excludes dismantling and transportation. Pedpozl R Imefx Abuogu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Podpfozmy Avex Abusgu

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WJ-MKS315, overall weight: 213 kg, type of input current: three-phase, input voltage: 400 V, Special offer: WEIBERT steel circular saw MKS 315 incl. 2 roller conveyors For sale is a WEIBERT steel circular saw, model MKS 315, including 2 roller conveyors. The sale is part of a company liquidation and is offered at a special price. • Machine: WEIBERT steel circular saw MKS 315 • Accessories: 2 roller conveyors (1 piece 5200 mm, 1 piece 2200 mm) • Shipping: By arrangement and for an additional charge Pgedpfjz Rm U Esx Abuou An interesting opportunity for commercial and industrial companies looking to purchase a steel circular saw at an attractive price. If you are interested or have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Rojek sliding table saw swiveling The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standard equipped with aluminum sliding table CV 360T with very precise and fixed mounting on hardened bars. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. Pjdpfx Abon D Arasujgu Engine power 5,3 kW Motor power of separate scoring unit 0,75 (1)* kW Speed of the saw blade spindle 4400 rpm Max. Cutting height of saw blade 315 (350/ 400) 90°: 102 (120/138) mm 45°: 71 (83/86) mm Max. Saw blade diameter with scoring 315 (350/400) mm Spindle diameter of the saw blade 30 mm saw blade tilting 90° - 45°. Diameter of scoring saw blade 120 mm diameter of scoring saw blade spindle 20 mm scoring spindle speed 8530 rpm (50 Hz) table size 400 x 955 mm cutting width 800 (500;1050; 1300; 1500) mm Suction pipe diameter P 100 + 40 (80) mm Noise level with technology LpAeq 92,9 dB Net weight approx. 500 kg Sliding table CV360 size of aluminum sliding table 2500 x 360 mm Cutting length 2500 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm Psdpfxsxz Hfmo Abuogu table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Year of construction: 2016, condition: reconditioned (used), Machine name:Dunkes drawing press Pgjdpfxopl T Rwj Abueu Type:HDZ 160 Year of manufacture:1988 Year of reconstruction:2016 Electrical drawing:16001E1 Operating voltage:3AC 400V Frequency:50Hz Rated current:100A Control voltage:24 VDC

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Pjdpfx Asw D Hiaobuegu Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: excellent (used), Hilge MAXA 125-315-CN Centrifugal pump Single stage end suction centrifugal pump, mounted on skid with Siemens 15Kw motor, flow rate 250M3/h Psdpe Ad Ri Eefx Abuogu