Used Eckold Lfs 60 S for sale (79,137)

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - LFS 60 S MACH-ID 3794 Fpodpfszdgkpex Anlek Make: ECKOLD Type: LFS 60 S Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Eckold tool ECKOLD - LFS 60 S Fsdpfxozdgi Eo Anljpk MACH-ID 3796 Make: ECKOLD Type: LFS 60 S Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, Eckold tool ECKOLD - FWA 602S MACH-ID 3789 Make: ECKOLD Type: FWA 602S Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fpodpfx Anjzdgkvoljk

Condition: good (used), Year of construction: 1990, total width: 250 mm, total length: 450 mm, total height: 250 mm, overall weight: 10 kg, Eckold tool ECKOLD - KSL60S Beak Shaped stretchinmg tool KS50S MACH-ID 3831 Make: ECKOLD Type: KSL60S Year: 1990 Length:450mm Width:250mm Fedpozc I Akofx Anlepk Height:250mm Weight:10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, Eckold tool ECKOLD - FWR60S Stretching dies for 2 mm steel 60 mm round MACH-ID 6883 Make: ECKOLD Type: FWR60S Year: 2013 Length:300mm Width:150mm Height:150mm Weight:20kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fjdjzc H N Nspfx Anlepk

Condition: new, Hydraulic profile steel shearing machine LFSS, type HKM 60 - 5 stations Including MUBEA punch and die holder Including Ringsland punch and die holder ::: PUNCHING ::: Ø / Sheet thickness: Ø 28 mm / 15 mm, Ø 38 mm / 11 mm, Ø 110 mm / 3 mm Stroke: 55 mm Stroke rate (20 mm): 26 / min Reach: 220 mm Working height: 940 mm ::: STEEL SHEARS ::: Round material capacity: Ø 40 mm Square material capacity: 35 mm ::: ANGLE SHEARS ::: Capacity 90°: 120 x 120 x 12 mm Fpjdpfx Ansgiplnsljk Capacity 45°: 80 x 8 mm Working height: 1140 mm ::: SHEET METAL SHEARS ::: Capacity: 200 x 20 mm, Capacity: 300 x 15 mm, Cutting length: 317 mm Cutting with angle: 80 x 10 mm, Working height: 940 mm ::: NOTCHING ::: Thickness: 10 mm, Width: 42 mm, Depth: 100 mm Working height: 940 mm Capacity: 60 tons, Motor power: 4 kW, Voltage: 400 V Weight: 1440 kg Dimensions (LxWxH) 1520 x 950 x 1780 mm

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Fodpfxezimgae Anlepk Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint Fpjdsx Ngikjpfx Anlek -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/60 -Elbe .: 0.106.110.0001 -Flange Ø 65 mm -Bolt circle: Ø 52 x 6 mm -Dimensions: Ø 65 x 320 mm -Weight: 2 kg

Condition: used, Year of construction: 2015, mast type: telescopic, fuel type: diesel, Lifting capacity: 227 kg Fsdpfxjzlm Ngo Anlepk Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Fjdpfexl Tp Tjx Anlspk Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Fjdpfjvl Skgsx Anlepk Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: new, GMN / Schaudt TSE 70c - 25000/8 spindle SN 386347 8 - 8 - 6.5kW S 6-60% 350-350-350V, unused in opened original packaging, 100% functional, scope of delivery as per photos Fodpfx Anoqfub Aolopk

Condition: new, GMN / Schaudt TSE 70c - 25000/8 spindle SN 371461 8 - 8 - 6.5kW S 6-60% 350-350V, unused in opened original packaging, 100% functional, scope of delivery as per photos Fpjdpfxsqfubxj Anljk

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Fpsdjx Eiq Hspfx Anljk Year of manufacture: 1998 Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: used, mileage: 467,100 km, power: 260 kW (353.50 HP), first registration: 01/2016, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1168 * S 516 MD Fodpfxsxwr Ape Anljpk * Retarder * French inspection certificate is available. * Currently fitted with 58 seats (no reclining seats) --> therefore, the number of seats can be increased. * An additional row of seats is included separately, allowing for 60 seats. * The following repairs were carried out at EVOBUS in June 2026: * Retarder replaced * Retarder control unit replaced * Exhaust gas recirculation valve replaced * Haldex separator replaced * 2 x V-belts replaced * Air reservoir with drain replaced * Oil separator replaced * Cost: 8,500 EUR / net * In July 2026: Air conditioning service performed * Side matrix (without control unit) * Interior route display * Seats can be adjusted to face backwards * LIFT * Lifting mechanism - trunk lid on the right side * Storage compartments * Convector heater * Auxiliary heater * Air conditioning * Rear entrance * No toilet, no refrigerator. * Wheelchair-accessible bus * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in operation / mileage and condition may vary. * All information is subject to change without notice. * We reserve the right to sell the vehicle in the meantime. * We refer to our general terms and conditions.

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Fodjk Rnq Nspfx Anlspk Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Lifting capacity: 567 kg Fpjdpfx Aozfn Ukjnljk Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Lifting capacity: 567 kg Fpodpfxezfllgj Anlsk Please contact Gebrauchtgeräte Center for more information

Condition: good (used), Code: 0423 Brand: ME.SA - ITALY Model: GT 60 S - CE Standard Chain and locks mortising machine with bits and cutters for joinery, wooden joinery, doors, furniture and various – CE Standard Technical data: Fpsdpjzgt Edjfx Anlsk Max mortise length 250 mm Head transverse stroke mm 100 Head rotation +/- 45° Vertical stroke of upright bracket 250 mm Vertical rotation of upright bracket +/- 45° Max window/door frame height 1000 mm Chain motor 3 Hp Vertical spindle motor 2 Hp Min/max horizontal spindle centre distance 50/130 mm Overall dimensions mm 850 x 900 x 1900 h Weight kg 390

Condition: used, Year of construction: 2014, mast type: telescopic, fuel type: diesel, Lifting capacity: 567 kg Fjdpfxezfmy Se Anljpk Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, Used Spiral Mixer S-Super FAB 60 - Approx. 60 kg dough, 37 kg flour - Year of manufacture: 2005 - 2-speed, 2 timers, manual/automatic mode - Bowl rotation clockwise/counterclockwise - Flour dust cover - Mobile - Painted version (grey) - Spiral motor power: 2.1/3.7 kW, bowl: 0.55 kW, 400 V Includes operating manual, fully functional, cleaned and technically inspected Fsdsy Rkqhjpfx Anlepk All prices are subject to VAT, ex works Syke. Available at short notice (shipping possible at buyer’s expense) Advance payment required with order. All sales are subject exclusively to our General Terms and Conditions. Sale subject to prior sale, technical modifications, and errors reserved.

Condition: new, Year of construction: 2025, Genie S-60 J telescopic boom lift, new, used - Demonstration machines available Fpedpfx Ajrqf Ahjnlok

Condition: new, Year of construction: 2026, neu 2026 090194 prompt, Zwischenverkauf v Spanien 22400 € 430.08 € 1 1 60 to 250 mm 5 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH Fjdpfx Aowirnxjnlopk WE HAVE MORE THAN 700 REFERENCES!

Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulics PN: 150 bar Pn: 16,5 kW P heating: 8 kW 400 V Single STW 150/1-3-10-K  Temperature control unit  3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Fedpog H I Nxofx Anlopk Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 1999, Used Shrink Wrapper OCME VEGA S 60-2-F 48000 bph The used shrink wrapper OCME VEGA S 60-2-F is a high-performance and reliable packaging solution, ideal for wrapping bottles, cans, or other containers using shrink film. Designed for high-speed production lines, this machine can achieve an impressive output of up to 48,000 bottles per hour (BPH), making it suitable for large-scale production needs while ensuring accuracy and efficiency. Main Features Model: OCME VEGA S 60-2-F Maximum speed: Up to 48,000 bottles per hour Configuration: Operates on 2 tracks to optimize production capacity Supported formats: Various bundle configurations such as 3×2, 4×3, and 6×4, compatible with PET bottles, glass bottles, or cans Packaging material: Shrink film, with or without tray support The OCME VEGA S 60-2-F is engineered to support different formats, enabling flexibility in meeting various packaging requirements. With its dual-track setup, the machine maximizes production efficiency, ensuring consistent throughput even during intensive operation. Benefits of the OCME VEGA S 60-2-F High productivity: Thanks to its dual-track design, the machine is tailored to meet the needs of high-demand production environments, such as large beverage or food processing plants. Format versatility: It seamlessly handles multiple packaging configurations, whether you need multipacks for retail or bulk distribution. Energy efficiency: Designed with optimized thermal systems to reduce energy consumption while maintaining fast and reliable shrink wrapping. Fedpfx Anevgu Dxslspk Robust and reliable: Built with industrial-grade components, the machine ensures long-lasting operation, even in challenging production settings. Easy maintenance: Features accessible components for fast, routine maintenance and minimal downtime, enhancing productivity on the production floor. Applications The OCME VEGA S 60-2-F is versatile and ideal for various applications, including: PET or glass bottles: Suitable for packaging water, soft drinks, beer, and oils. Cans: Designed to handle beverage cans for soft drinks, beer, or food products. Other containers: Handles a wide range of plastic, glass, or composite containers, making it suitable for both food and non-food industries. The ability to switch between different formats and configurations ensures that the machine is ready to adapt to changing production demands. Whether you are packing small retail units or larger multipacks, this machine guarantees flexible operation without sacrificing efficiency. Why Choose a Used OCME VEGA S 60-2-F? Opting for a used shrink wrapper like the OCME VEGA S 60-2-F offers businesses the opportunity to acquire premium packaging equipment at a fraction of the cost of a new machine. Each unit undergoes rigorous inspection, testing, and servicing to ensure full functionality and operational readiness before delivery.