Used Edge Surface Coating System Wikoma Ll001 (2021) for sale (46,926)

Condition: used, Year of construction: 2021, Painting system for edge surfaces Manufacturer: WIKOMA Painting of narrow edge surfaces Commissioned: 2021 Intended use: Spraying the edges of furniture panels arranged in stacks. Scope of delivery: - 2 spray booths - 2 hot air drying tunnels - 1 sanding booth - Chain conveyor - Control cabinet Rcsdpezuztxefx Alcef The system was in operation until the end of June 2025. Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Rcsdpfx Aljwmm U Uecof

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. Rcsdpow Ek Ntefx Alcjf The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Condition: used, Year of construction: 1995, System with inlet and outlet sections. Max. glass height: 2500 mm. Total length: 6200 mm. Rcodpjwkh U Dsfx Alcjf Max. Height: 3840 mm.

Condition: good (used), Year of construction: 1995, Semi-automatic edge decoating system, Working height: 900 mm. Rederidqxopfx Alcscf Width: 1400 mm, depth: 1200 mm, Max. Height: 1490 mm (up to operating terminal), Weight: 180 kg.

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Rcjdpfx Aleya Hvqscsf Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 1 x 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. Rodpfx Aszn Rcijlcecf The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. KEY SPECIFICATIONS: Manufacturer: CERTUSS. Model: Universal 600 TC. Date of manufacture: 2021. Steam output: 600 kg/hour. Fuel: Propane (but can be converted). High-efficiency industrial steam generator. Compact vertical design. Fast start-up from cold. Automatic PLC control system. Complete steam generator package with ancillary equipment. Suitable for continuous industrial process steam applications. Condition: Excellent - very low working hours.

Condition: used, This listing is for Edge Systems S.A.F.E System Surgical Smoke Evacuator The unit is in full working condition and ready for immediate use This surgical smoke evacuator is a high-quality lab instrument manufactured by Edge Systems (Model: S.A.F.E System). Efficiently captures and filters airborne particulates and hazardous smoke plumes, enhancing the safety of the operating or clinical environment. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: Redpfxjzqf N Ne Alcjcf As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Rsdpfx Alezii N Dscocf

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Rcsdpfx Alezwfiiocof

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Rcjdpjb Evnkjfx Alcof A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request

Condition: used, Year of construction: 2009, Painting system The system consists of: SORBINI Smartcoater SP1 paint roller coating machine, year of manufacture 2009, approximately 3000 operating hours Roller coating and puttying machine Technical data - Working speed: 5-20 m/min - Workpiece width: max. 1350 mm - Workpiece thickness: max. 100 mm Rcjdpfx Alozuzrhscef UV lamp control cabinet UV lamps SUPERFICI Model 2UVPLUS65, year of manufacture 1998, on a VENJAKOB conveyor belt, year of manufacture 1998, average number of operating hours 8500 Working area 1.5 - 7.5 m/min. Max. element width 1300 mm Dimensions (length x width) Lamps with conveyor belt: 5100 mm x 1700 mm (+ 600 mm motors) Rollers: 2200 mm x 2900 mm Control cabinet for UV lamp: 2000 mm x 800 mm Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Rjdpszuzqdefx Alcecf Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm Redpfx Aezuzbcelcecf - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. Rcedpfxszuyplo Alcef - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Redpfezuyh Ijx Alcscf Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit Rjdjzuyhnopfx Alcocf - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2015, This inspection system is from Zumbach Electronics AG at Plastima Used Machinery in machine storage. The machine is from 2015 and is in good condition. - Brand Zumbach Electronics AG - Type Simac 63 Rcedjtpnfbepfx Alcsf - Year of construction: 2015 - Number of cameras 3 - Pipe diameter min. 2 mm - Pipe diameter max. 50 mm

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. Rjdszu Rpiopfx Alcscf - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 250 kg, temperature: 220 °C, heating capacity: 60 kW (81.58 HP), workpiece length (max.): 4,000 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Professional powder coating system – Compact complete solution meeting industry standards Rcodeffwfxopfx Alcof High-performance and flexible: This complete system delivers excellent coating results for workpieces up to 4.0m in length. Equipped with high-quality Wagner or Gema technology, an indirectly heated gas/electric curing oven, and an integrated conveying system. Each component can be individually adapted to your production requirements and space constraints! For sale is a professional powder coating complete system from the trading agency Klaus Benecke, designed for high manufacturing quality and smooth material flow. The system combines a large-volume curing oven with energy-saving rock wool insulation and indirect gas heating for even heat distribution up to 220 °C. A mobile spray booth with a powerful filter extraction system and integrated Wagner/Gema application technology ensures precise coating. The manual rail system with transverse movement efficiently connects the workstations and is designed for high load capacities. A central control system with PT 100 sensors ensures precise temperature control of the entire system. Quick overview (technical details): - Curing oven: 4,000 x 1,500 x 2,200 [mm], max. 220 °C, 150 mm rock wool insulation, indirect gas burner (Riello BS2, 60 kW). - Spray booth: Mobile (2,000 x 2,100 x 2,200 [mm], 6,000 m³/h fan (3.0 kW), 4 cartridge + absolute filters, 60 L powder container. - Coating system: Wagner/Gema manual system (Corona/Tribo, max. 450 g/min). - Conveying technology: Rail system with transverse movement, 72 m rail, 1 trolley, 6 traverses (load capacity: 250 kg/traverse, 750 kg/trolley). - Control system: Control cabinet for oven and booth with PT 100 sensors. Individual configuration: Do you have specific requirements regarding component sizes or throughput? We will plan and configure your powder coating system precisely according to your specifications. Contact us now to discuss your project details.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: Rsdpfxoum Ufle Alcocf - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: used, Year of construction: 1995, working width: 1,300 mm, compressed air connection: 7 bar, Machine type: Coating system for coating, lacquering, and laminating from roll to roll using solvent-free adhesives. Manufacturer: NORDMECCANICA Type: Duplex Compact Model: Duplex C - SL1300 Year of construction: 1995 Web width: 650 to 1,310 mm Laminating width: Up to 1,300 mm Speed: Mechanically up to 300 m/min. Materials for coating: BOPP 15 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 40 - 200 µm OPA 12 - 18 µm NYLON CAST 50 - 80 µm ALUMINUM 15 - 40 µm PP CAST 60 - 150 µm SATIN PAPER 40 - 300 g/m2 Materials for lamination: BOPP 12 - 80 µm PETP 12 - 30 µm LDPE, LLDPE 20 - 200 µm OPA 12 - 18 µm NYLON CAST 20 - 80 µm ALUMINUM 7 - 40 µm PP CAST 25 - 150 µm EVOH 12 - 20 µm CAST MATERIALS 25 - 200 µm SATIN PAPER 40 - 300 g/m2 Unwinding unit A: Model 850 Roll change: Automatic up to 300 µm Roll diameter: 90 to 850 mm Roll weight: Up to 900 kg Core diameter: 70 / 76 / 150 / 152 mm Web tension: 2.5 to 55 kg Layer thickness: Up to 300 µm Pre-treatment: Corona Unwinding unit B: Model 850 Roll change: Automatic up to 300 µm Roll diameter: 90 to 850 mm Roll weight: Up to 900 kg Core diameter: 70 / 76 / 150 / 152 mm Web tension: 2.5 to 55 kg Layer thickness: Up to 300 µm Pre-treatment: Corona Coating and laminating unit: For solvent-free adhesives. Coating unit with 4 rollers, 2 of which are heated. Laminating unit with 3 rollers. Rewinding unit: Model 850 Roll change: Automatic up to 300 µm Roll diameter: 170 to 850 mm Roll weight: Up to 900 kg Core diameter: 150 / 152 mm Web tension: 6 to 55 kg Layer thickness: Up to 500 µm Mixing and metering unit: Manufacturer: DOPAG, Switzerland Model: Variomix Rcedoy Hgwpjpfx Alcef Heating elements. Electrical connection: 220 / 3 x 400 V, 50 Hz Installed power 180 kW Maximum current consumption 90 amps Average power consumption 35 kW Compressed air connection: Inlet pressure: 7 and 10 bar Consumption max. 400 liters/min. Water consumption: 2000 liters/hour Standards: CE, CEE 89 / 392 ff. EN 60 204-1, SUVA Condition: Used. Availability: Available immediately.

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Rcjdpfx Aoyvav Nelcjf

Year of construction: 2019, condition: used, LAS coating system, Erlaser Clad, year of manufacture 2019. Rjdpfx Alszvwc Secscf

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) Rjdpfx Ajzn Ixnelcscf - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.