Used Elsto Am-Tk71Ba2 for sale (6,836)

Condition: good (used), Year of construction: 2016, electric motor, three-phase motor -Manufacturer: elsto, electric motor type AM-TK71BA2 -Power: 0.55 kW -Speed: 2640 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 55 -Dimensions: 300/185/H145 mm Fsdpjh D Ilpefx Anlspk -Weight: 8.3 kg

Condition: ready for operation (used), functionality: fully functional, rotor length: 650 mm, rotational speed (max.): 160 rpm, rotor diameter: 500 mm, TECHNICAL DETAILS Hopper opening: 1,850 × 1,250 mm Hopper volume: approx. 3.0 m³ Rotor diameter: 500 mm Rotor length: 650 mm Rotor speed: approx. 160 rpm Power: material-dependent MACHINE DETAILS Control system: PLC control Motor-gearbox power: 45 kW Control cabinet: Fully wired Cable length: 5 m Fjdozr Hyljpfx Anlepk EQUIPMENT Control cabinet including 5 m cable Automatic star-delta starter

Condition: used, Side channel compressor, side channel blower, vacuum pump, blower, dust extraction fan, exhaust gas extraction, welding fume extraction, suction, fan, pressure blower, vacuum blower, low pressure fan -Pressure blower: High pressure blower with transport rollers -Motor: elsto Type:ES 160M2A-40 H -Motor power: 11 kW / 2900 rpm -Volume flow: m³/min -Connection input: Ø 185 mm -Connection output: Ø 160 mm -Base plate: 800 x 250 mm -Dimensions total: 1260/920/H1170 mm -Weight: 161 kg with pallet Federh Nitepfx Anlopk

Condition: good (used), Year of construction: 1997, Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer of gearbox: Bonfiglioli type MVF 49/F -Speed: 50 rpm i= 28 Fsdpfx Anezd S Ekslepk -Manufacturer Motor elsto ES FC 80M4A-40 -Power: 0.55 kW -Hollow shaft: Ø 25 x 80 mm -Protection class: IP 54 -Dimensions: 375/200/H210 mm -Weight: 12.1 kg

Condition: used, maximum load weight: 17,700 kg, overall weight: 18,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,100 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, tail-lift, The trailer is in top condition – AS NEW. * Own hydraulic unit (24V) * Liftable roof with emergency operation * Hydraulic loading ramp * Through-loading doors Fpodpfxozhfbge Anlek * Feed flap * Manual side sliding doors * Partition gate with door * Fan * Drinking trough system with water tank * 1 intermediate floor with 2 partition gates per level ----* 18.6 m² loading area per level ----* Radio system with remote control * Wireless camera system * Telematics system pre-installation ----* Wabco Trailer EBS-N * Wabco OptiLevel suspension * BPW ECO Plus axles, twin-tired * Walkable drawbar, extendable * 2nd axle can be lifted * Spare wheel ----* Tire size: 245/70R17.5 * Technical gross weight: 27000 kg * Tare weight: 9300 kg * Overall length: 10000 mm * Next inspection due: 03.2027 ----Vehicle number: 12196----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection approval, complete export handling, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport----“YOUR VTS TEAM”

Condition: excellent (used), Year of construction: 1996, Very good condition AM Wohlenberg/ Sheridan SP562S saddle stitcher with associated compensating stacker. Fodpfx Anjriv Dholspk The machine has 6 stations and cover feeder. Also included are 2 center cut devices and 4 Hohner stitching heads in working condition including knives. The complete technical documentation, operating instructions and spare parts lists are available. Disassembly, transportation and recommissioning of the machine can be offered for an additional charge by arrangement.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Machine body, internal pipe system, control cabinet and washing basket made of stainless steel - electronically controlled basket drive - level control - lid locking - removable filter plate - weekly timer function Oil skimmer model WE AM version for additional manual cleaning - lid with viewing window, lighting, and sleeve gloves - low-pressure pump, 3-6 bar, with brush washing system and hand spray gun - blow-off gun, compressed air High-pressure unit, 160 bar, for AM version permanently installed on the machine side. Fpedof A Nquepfx Anlok

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 x Cimec America Rinser, 8-Head Filler and Capper. This is a compact, automatic monoblock bottling system equipped with 9 x rinsing nozzles, 8 x isobaric (counter-pressure) filling valves, and 1 x capping head. It is highly engineered for rinsing, filling, and crowning still and carbonated beverages. Manufacturer – Cimec S.r.l. Type - AM/DPS 9/8/IC/IVA. Date of manufacture - 2004. Equipment Included: • Rinser, filler and ROPP capper integrated. Crown capper is currently disabled. • All conveyors and drive motors – both ends. • Various change parts including 200ml and 330ml (currently installed). Output speed - Capable of up to 1,800 bph, depending on the bottle volume and product type. Overall dimensions - 3.5 m long x 1.4 m wide x 2.6 m high (approx.). Fpsdsy Um Anepfx Anlek Last in production in August 2025.

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Fodpfxewqgh Aj Anljpk Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: new, AEG Modicon AM-C 916-100 CPU board, serial number 0007107, unused, 100% functional. Fpedpfx Asi D Tu Ajnlsk

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating MACHINE DETAILS Drive power: 45 kW Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Stuffing device Hopper for material feed Large filter / screen changer Fodpfx Anszr Hz Aslepk Adapted die

Condition: ready for operation (used), Knoll TSK40-21/30558 pump, part number 200511775, serial number 271359, with AM 100L AA2 motor, serial number 491439, used, in like-new condition, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Fjdpfxszpcwhj Anljpk

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider Screw Compressor 4152009631 - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control The machine was purchased as a spare unit in 2020 and is new and has not been used. The machine was never used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Fpedeziukyspfx Anlok Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: used, machine/vehicle number: 1380A, mileage: 20,481 km, power: 179 kW (243.37 HP), first registration: 07/1984, fuel type: diesel, overall weight: 16,388 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, crane, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a good condition directly from the Army , Well maintained and maintained, the body is in good condition (vehicle from the reserve) therefore the paint is bad and partially flaked , The M936W / W is equipped with: All-wheel drive, 5-speed automatic gearbox, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body is a 5-ton telescopic crane with an extension. The vehicle is equipped with: front thread, heavy rear thread, tractive force 12474kg, mountain support (these can be attached to the front, rear and side, 4-point support can be extended laterally, various accessories, the km are miles, driving license class 2 (truck), tire size 11.00R20 (very good condition), top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M936 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timerr AM Generalist drives really great makes a lot of fun . - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Fpjdoqx S Adjpfx Anlsk

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Fsdpfx Aneqx Sxloljpk

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. Fpjdpfeyyw T Ujx Anlok The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development • Color and mixing tests

Condition: used, Year of construction: 2018, operating hours: 731 h, Bomag BW 154 AP-4 AM tandem roller, year of manufacture: 2018, operating hours: only 731h, engine: Kubota [55.4 kW/75 hp], Asphalt Manager 2, weight: 7,300 kg, smooth drum, good condition, ready for immediate use. Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! = Further information = Fjdjzq Tzyspfx Anljpk Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2017, operating hours: 1,751 h, Bomag BW 154 ACP-4i AM combination roller, year of manufacture: 2017, operating hours: only 1,751 h, engine: Kubota [55.4 kW/75 PS], Asphalt Manager 2, asphalt cutter on both sides, weight: 7,400 kg, smooth drum, good condition, ready for immediate use. Fpsdpfx Aszq Tztenlok Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. = Further information = Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2017, operating hours: 1,459 h, Bomag BW 154 ACP-4i AM combination roller, year of manufacture: 2017, operating hours: only 1,459 h, engine: Kubota [55.4 kW/75 hp], Asphalt Manager 2, asphalt cutter on the right, weight: 7,400 kg, smooth drum, good condition, ready for immediate use. Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. = Further information = Fpsdpfjzq Tzmsx Anlok Please contact Tobias Ebert for more information.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective Fpjdpfx Ansvmivcolek System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: ready for operation (used), Knoll TG 50-20/40 480 submersible pump with AM 112M AA2 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Fpjdpfx Anjzirp Hjlek

Condition: used, Three-phase motor, electric motor Fpodjct A Ivspfx Anljk -Power: 9.2 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/330/H270 mm -Weight: 80 kg

Condition: excellent (used), Three-phase motor, electric motor -Engine: unused -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Design: B35 Fedocuta Depfx Anljpk -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

Condition: good (used), Year of construction: 2007, Geared motor, spur geared motor Fjdjb A H S Nopfx Anljpk -Power: 0.25 kW -Speed: 43 rpm -Shaft: Ø 20 mm -Design: B14 -Protection rating: IP65 -Quantity: 1 available -Dimensions: 458/133/H215 mm -Weight: 17.7 kg

Condition: used, Electric motor, three-phase motor, brake motor Fpedpfx Anjgfrbxolsk -Manufacturer: AEG, electric motor Typ AM160 MV4 Ex -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 42 x 110 mm -Protection class: IP 44 -Construction: B3 -Dimensions: 550/340/H290 mm -Weight: 90 kg