Used Emco Emco Vmc 300 for sale (12,480)

Condition: used, For sale is a used vertical machining center EMCO VMC 300. Equipment / Data: Manufacturer: EMCO Model: VMC 300 Year of manufacture: approx. 1990 Control: Siemens Sinumerik / 810M Travel paths: approx. X 420 / Y 330 / Z 400–450 mm Tool holder: SK40 Tool changer: 12 positions Table size (as with comparable models): approx. 850 x 325 mm Spindle speed (comparable units): up to 5,000 rpm Machine weight (comparable units): approx. 2,900 kg Contents of rack with various machine accessories are available and can be included by arrangement. Comparable VMC 300 machines are specified with a 12-station tool changer, SK40, table 850 x 325 mm, 5,000 rpm and approx. 2,900 kg weight. Dodpfey D Ut Hox Apwout Condition: Used, typical for its age. Visual condition: see photos. Functional status: [Machine was operational until removal / tested under power] Therefore, sale is preferably to knowledgeable buyers. Scope of delivery: - EMCO VMC 300 - Siemens control - 12-position tool changer - Various accessories / contents of rack by arrangement Note: Inspection by appointment possible. Loading / collection by arrangement. Sale preferably to commercial buyers.

Condition: used, For sale is a used EMCO VMC 300 vertical machining center with 4th axis / rotary table. Equipment / Specifications: Manufacturer: EMCO Model: VMC 300 Year of manufacture: approx. 1990 Control: Siemens Sinumerik Travel: approx. X 420 / Y 330 / Z 450 mm Spindle taper: SK40 Tool changer: 12 positions 4th axis / rotary table included Various tools / accessories / documentation available, see photos Condition: Used, condition consistent with age. Visual condition as shown in the pictures. Machine can be demonstrated under power. Sale explicitly as used. Scope of delivery: 1x EMCO VMC 300 Siemens control 12-position tool changer Dujdpfxoy D Utys Apwot 4th axis / rotary table Visible tool holders / accessories / documentation as pictured Note: Inspection by appointment is possible and recommended. Collection / loading by arrangement. Sale preferably to knowledgeable buyers from industry, workshops, or maintenance.

Condition: ready for operation (used), Year of construction: 2003, controller manufacturer: SIEMENS, controller model: SINUMERIK, total height: 2,450 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of axes: 3, This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. Additional equipment • Max Torque: 100 Nm (at 5000 RPM), 78 Nm (at 8000 RPM option) • Tool Change Time: T1: 5.8 s, T2: 3.9 s, T3: 3.9 s // Span-to-span Time (VDI 2852): T1: 8.9 s, T2: 7.0 s, T3: 7.0 s • Coolant System: Tank capacity 100 liters / Flow rate 10 l/min / Max delivery pressure 3.7 bar / 4 external nozzles • Lubrication System: Automatic central lubrication for guideways and ball screw spindle / Grease lubrication for main spindle bearings • Pneumatic Connection / System pressure 5 - 10 bar • Minimum air flow 750 l/min / Average air consumption 180 l/min • Electrical Connection: Power supply 3/PE ~ 400 V 50/60 Hz / Connected load 15 KVA / Main fuse 35 A slow-blow Machine Benefits Technical Machine Benefits Duedeya Hg Njpfx Apwot • Qualitative machine benefits: • Reliable tool change system with 12 stations • Integrated automatic lubrication system for guideways and ball screw spindles Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1998, operating hours: 28,500 h, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 5,000 rpm, VMC 300 Siemens 810D control SK40 12 tool positions In good condition Fully functional Dujdpfxewlpb Ue Apwjt

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Dodpfxsy Nz Dio Apwsut

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Dedpfx Asy N Adqjpwsut Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Djdpfx Apjy H I H Sewout

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Dedoxxakwepfx Apwsut Year of manufacture: 2000

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Djdpfx Apovc Awreweut Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m Dusdpfx Aevwgpbspwot This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Dujdpfx Aelz Rvlspwst Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2012, turning diameter 550 mm Dodpfey N D Sisx Apwsut turning length 1500 mm control Fagor 8055 x-axis 108 mm z-axis 3000 mm

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Spindle bore 108 mm Capacity 2000 x 570 mm Steady rest Dsdpfjx E Au Iex Apwsut

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Year: 2017 Some repairs have been carried out, and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are 'slightly' worn. Tool turret checked and adjusted. X-axis belt renewed and machine zero point set. Z-guides in the area of the chuck are slightly worn. Automatic band lubrication oil leak – troubleshooting completed, problem resolved, lubrication oil line renewed. 100% operational. Loaded free of charge. Dsdpfx Aow I S Uujpweut Immediately available. Location: 8740 Zeltweg, Austria

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 • incl. handwheel + 3 vices with clamping devices Dusdpfx Apeyucbfswjt

Condition: excellent (used), Year of construction: 1999, operating hours: 1,100 h, functionality: fully functional, Johnford vertical machining center Model VMC 1300 Year : 1999 Table size : 1500 x 710 mm Longitudinal travel : 1300 mm Cross travel : 850 mm Vertical travel : 800 mm Spindle speeds 80 - 8.000 rpm Tool change 24 pcs Spindle taper : ISO 40 Control : FANUC O-M Cycle hours : 1100 hours Short arbors Dsdpfx Asxvxtrspwsut Interface RS-232 C Coolant

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Make: Hedelius Type: BC80 /2300 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Height: 3100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Duedpfxoy Enzae Apwet

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW Dujdpfsqn A Rrsx Apwet

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : Duedjy Izh Sopfx Apwot The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee Djdjy Ixvtspfx Apwout - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, Year of construction: 2000, Technical details: turning diameter: 360 mm Dsdpfx Apsx Dcgxewout turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm Duedpfx Apjx Aq Hkowst total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 4,000 rpm, travel distance X-axis: 48 mm, travel distance Z-axis: 236 mm, spindle motor power: 750 W, total height: 400 mm, overall weight: 85 kg, number of axes: 2, Horizontal turning machine manufactured in 2006. This EMCO Concept Turn 55 features a maximum turning diameter of 52 mm and a maximum part length of 215 mm. It includes a tool turret with 8 positions and a spindle speed range of 120–4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMCO Concept Turn 55 machine we have for sale. Contact us for further details. • Working area • Swing over bed: 130 mm • Swing over cross slide: 60 mm • Maximum turning diameter: 52 mm • Maximum part length: 215 mm • Spindle/Workholding • Spindle connection: factory standard • Spindle bore: 16 mm • Chuck diameter: 74 mm • Through hole in chuck: 15 mm • Automatic chuck diameter: 76 mm • Mechanical speed steps: 2 • Maximum torque: 14 Nm • Tooling • Tool turret positions: 8 • Tool holders (internal/external): 4/4 • Tool shank size: 12 x 12 mm • Boring bar diameter: 10 mm • Feeds/Drives/Accuracy • Feed drives: 3-phase stepper motors; resolution 0.0005 mm • Rapid traverse X/Z: 2 m/min • Working feed X/Z: 0–2 m/min • Feed force X/Z: 1000 N • Position scatter X: 0.008 mm • Position scatter Z: 0.008 mm • Tailstock • Quill stroke: 35 mm • Quill diameter: 22 mm • Taper: MK1 • Automatic tailstock quill stroke: 15 mm • Lubrication • Guideways: oil • Other lubrication points: grease • Pneumatics • Supply pressure: 6 bar • Connection: 10 mm • Electrical • Power supply: 115/230 V • Voltage tolerance: +5/-10 % • Frequency: 50/60 Hz • Connected load: 0.85 kVA • Max fuse: 12 A • Dimensions/Weight/Noise • Axis height above floor: 320 mm • Footprint: 840 x 695 mm • Sound pressure level: 65 dB(A) Technical Specification Driven Tools No Duedpfx Aoy H Etcspwot Counter Spindle No

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm Duodpey Hty Djfx Apwot • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: used, Year of construction: 2005, Technical details: turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm Dedpfx Aex Apd Uopweut turning length: 700 mm spindle bore: 50 mm spindle turning speed range: 40 - 3000 U/min total power requirement: 6 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 2 x 1 x 1,6 m