Used Engel Es 3550/650 for sale (11,252)

Condition: excellent (used), Hydromotor for screw cylinder Injection unit size ES3550 Iodpfxefnqagj Am Eeia Hägglunds Drives Type CA50 20 2 0 0 N 004

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 30192, clamping force: 6,500 kN, screw diameter: 90 mm, clearance between the columns: 925 mm, injection weight: 2,331 g, opening stroke: 900 mm, installation height: 920 mm, total length: 11,300 mm, total width: 2,600 mm, overall weight: 44,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, controller model: CC100, Equipment: documentation/manual, The machine is still in operation and has been maintained at short service intervals during use. The machine is connected and fully functional. An inspection with testing is possible. All documentation for the machine is available. A Sepro “Success 33” linear extraction robot is installed on the machine. Operating voltage: 400 V 3~ 50 Hz Screw diameter: 90 mm Maximum dosing stroke: 390 mm Iodpfoyzm Htox Am Eoia L/D ratio: 22:1 Nozzle thread: M45x3 Shot weight (PS): 2331 g Tie bar distance (horizontal): 1025 mm Tie bar distance (vertical): 925 mm Maximum opening stroke: 900 mm Minimum installation height: 400 mm Maximum installation height: 920 mm Centering: 200 mm Cooling circuits FAB/BAP: 12 + 10 Air connections: 2 Core pulls: 2+1 Maximum ejector stroke: 100 mm Incl. robot, safety enclosure Excl. Piovan dosing unit, conveyor belt

Condition: excellent (used), Year of construction: 2006, Technical data Approximate dimensions on site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight (approx.): 33,000 kg Serial number: 161394 Item description Clamping unit Clamping force: 6,500 kN Distance between tie bars: 1,025 × 930 mm Min./max. mould height: 450 / 950 mm Maximum opening stroke: 1,800 mm Injection unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Iiodpfxjyu Niie Am Eea Electro-hydraulic equipment Rated power of pump motor: 55 kW Heating capacity: 62 kW

Condition: excellent (used), Year of construction: 2004, Engel ES 3550/600 HL Technical Data Year of manufacture: 2004 Clamping Unit: Clamping force: 6000 kN Platen size (W x H): 1480 x 1300 mm Minimum mould height: 500 mm Maximum mould height: 1700 mm Opening stroke: 1200 mm Ejector stroke: 250 mm Ejector force: 110 kN Iijdpfx Amox Up Ums Esa Injection Unit: Screw diameter: 80 mm Shot volume: 1960 ccm Specific injection pressure: 1730 bar Screw length: 22 l/d Dosing stroke: 390 mm Number of heating zones: 6 Nozzle stroke: 700 mm

Condition: excellent (used), Year of construction: 1999, Angel ES 650/175 HL-V Closing 175 tons Year 1999 Scrow 45mm Iiodpfxspdrzhj Am Eja Stroke volume 318 cm3 Enlarged clamping plate 820x750 Mould height min 250 mm

Condition: excellent (used), Year of construction: 1996, Engel ES 3550/650 Iedpfx Amoxvmmys Eoia Clamping force 650 t Clamping force up to 725 t Year 1996 Tie bar distance 102.5 x 92.5 cm Screw diameter 90 mm Shot weight 2400 g Shot weight 2230 g Tie bar spacing 92.5 x 102.5 cm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 Iijdpfxoyf Htyj Am Eoa • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone Iiodpeyfrb Nsfx Am Esa

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s Iiodpfx Amjyf H Nne Esa • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Iiodpfxeyak A Ie Am Eja Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC100 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550 Iisdpofnqapofx Am Eoa

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,708 h, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, total length: 11,810 mm, total width: 3,200 mm, total height: 2,900 mm, Clamping force: 8000 kN Tie bar spacing h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Min. mold height: 500 mm Max. mold height: 1100 mm Max. daylight: 2100 mm Opening stroke: 1600 mm Screw diameter: 135 mm Shot volume: 8870 ccm Injection pressure: 1640 bar Equipment Screen text in German Screen text in English CEE socket 16A Iisdpfeyv E Hbsx Am Eea CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling Machine including safety enclosure Machine with water manifold EUROMAP 12 interface Handling interface USB interface Mold heater 16x Handling Technical Data Type of handling: Linear Brand: ENGEL Model: ERC 64/1-F Handling weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm Machine dimensions LxWxH: 11.81 m x 3.2 m x 2.9 m Total weight: 56,000 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Isdpjyv Embsfx Am Ejia Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Iijdpfxey Avl Uj Am Eea Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Iodpfxsy Dqr Eo Am Eeia Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2008, operating hours: 59,934 h, screw diameter: 45 mm, displacement volume: 318 cm³, ENGEL Victory 650-120 Tech Stock No.: 503240 Manufacturer: ENGEL Iiodeytfn Eepfx Am Eja Model: VICTORY 650-120 Tech Control: EC200 A02 Year of manufacture: 2008 Operating hours: 59,934 h Technical Data Clamping Unit Clamping force: 1200 kN Platen size (H x V): 740 x 680 mm Minimum mold height: 300 mm Maximum daylight: 800 mm Opening stroke: 507 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Tool weight: 825 kg Technical Data Injection Unit Screw diameter: 45 mm Shot volume: 318 ccm Injection pressure: 1525 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 290 min⁻¹ Free shot weight (PS): 220 g/s Number of heating zones: 5 Nozzle stroke: 300 mm Dimensions & Weight Machine dimensions (L x W x H): 4.86m x 1.5m x 2.1m Total weight: 7,600 kg Equipment - Display language: German - CEE socket 16A - Hydraulic core pull, 2x - Air valve, 2x - Machine with water battery - Machine without material hopper - Levelling elements - Schuko socket 10A - Tool heating, 8x

Condition: excellent (used), Year of construction: 2000, Technical Data Approximate dimensions at site (L × W × H): 8,000 × 2,250 × 2,200 mm Weight (approx.): 5,600 kg Product Description Serial number: 42503 Clamping Unit Clamping force: 4,000 kN Dimensions of mounting plates: 1,300 × 1,080 mm Min./Max. mould height: at least 350 mm Iiedpfxjyu Nc Ao Am Eea Maximum opening stroke: 1,300 mm Injection Unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar Electrical-Hydraulic Equipment Rated power of pump motor: 45 kW

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar • Ejection force: 215 N • Opening stroke: 1800 mm • Heating capacity: 113 kW (153.64 hp) Iisdpfxjyuc Urj Am Eea

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. Isdpsx Nr Huefx Am Ejia • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Iedpfxsukn S He Am Eoia Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Year of construction: 2006, condition: ready for operation (used), Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: approx. 2500kg, control system: CC100, operating hours: approx. 113300h. 3) Engel ES 2000/250, year of manufacture: 1993, core pulls: 3, injection unit: PVC, screw diameter: 70mm, shot volume: 1154cm³, injection pressure: 1400bar/1700bar, nozzle stroke: 450mm, nozzle contact force: 150kN, clamping force: 2500kN, opening stroke: 600mm, ejector force: 70kN, ejector stroke: 200mm, min. mold installation height: 200mm, platen dimensions X/Y: 910mm/910mm, weight: approx. 16000kg, control system: CC90, operating hours: approx. 109300h. Including Wittmann W322 automation robot. 4) Engel ES 750/150 HL, year of manufacture: 1998, core pulls: 2, screw diameter: 35mm, shot volume: 135cm³, injection pressure: 1060bar/1600bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 600kN, opening stroke: 450mm, ejector force: 40kN, ejector stroke: 100mm, min. mold installation height: 150mm, platen dimensions X/Y: 600mm/560mm, weight: approx. 4700kg, control system: CC100, operating hours: approx. 108600h. Including Engel sprue picker automation robot. Documentation available. An inspection on site is possible. Isdpfxoyu T D De Am Esia

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm Ijdpfsyw Aa Uex Am Ejia 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine: ENGEL DUO 5550/650 pico Control System: CC200 Year of manufacture: 2011 Operating hours: 61,606 h 1. Clamping Unit Clamping force: 6,500 kN Tie bar clearance (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Ijdpfxjywrtwe Am Esia Max. daylight between platens: 2,050 mm Max. mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm Max. injection volume: 2,740 cm³ Max. shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio: 20 Screw stroke: 430 mm Max. screw speed: 148 rpm Plasticising capacity: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: - 4 pcs. (installed on the fixed platen) 5. General Specification Two-platen machine (DUO series) designed for the production of large plastic parts. The design ensures high rigidity of the clamping system and allows operation with heavy moulds while maintaining a large opening stroke. The CC200 control unit enables precise process parameter control and integration with automation systems and peripherals. If you wish, I can also prepare: - a sales offer version (more marketing-oriented), - translation into German or English, - or a market value assessment of this machine.

Year of construction: 1996, condition: ready for operation (used), Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible. Iijdpfx Amoynat Eo Eoa

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Iisdoyuayrepfx Am Eja