Used Ep Rpl301 for sale (2,678)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Bjdpfx Aozvmy Hel Ujdg Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, REF: MM6450 Bdjdpfx Alozcb E Se Usg 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). All equipment to be removed from the factory by the Buyer.

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Bdodpfswpunbsx Al Usg Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, 1 x Comas DP Depositor Type-800 8-lane (Serial no. 2614, Date of manufacture – 1997). Bjdpfezcaz Eox Al Usdg Videos available on request. All equipment to be removed from the factory by the Buyer.

Condition: used, Year of construction: 2009, functionality: fully functional, pressing force: 60 t, filling opening width: 1,000 mm, filling opening length: 1,450 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, total width: 2,500 mm, total height: 3,500 mm, total length: 9,255 mm, overall weight: 14,000 kg, warranty duration: 12 months, transport height: 2,587 mm, transport width: 2,500 mm, transport length: 6,645 mm, Equipment: documentation/manual, For sale is a bale press, model EP 6000 V5, manufactured in 2009. Bodpfx Aszgf Hgel Uodg Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the demands of daily operation. The overhaul includes, among other things, the following services: • Disassembly and inspection of relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, sliding guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the bale tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We would be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Cybelec, bending force (max.): 160 t, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Used Bystronic Xact 160 EP 40-160 CNC Pressbrake For Sale Capacity: 4metre x 160ton With: Cybelec DNC 880S Control Bjdpfx Aox A E Rkol Uedg 4 Axis (Y1, Y2, X, R + Crowning) Safety Guards Fully Enclosed Rear Glass Doors Wandering Foot Pedal/Pedestal Stop Serviced with Bystronic UK With upper and lower tooling

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Bedpfxjzrhvue Al Uedg

Year of construction: 2021, operating hours: 5,000 h, condition: used, functionality: fully functional, EPS Complete Production Line For cutting and packaging EPS blocks: Model: VIRO HV Q-4 Y 2021, Price: €459,000 Includes a side scrap handling unit, bale/bundle packaging unit, bale marking and paint marking unit for color-coding bales, and a separate dust compaction unit for stack formation. Also includes a weighing unit, automatic block tilting, automatic cutting wire adjustment, optional manual removal, and a semi-automatic equipment group for producing bales with a minimum size of 50x100 cm and for creating stacks. Designed for handling blocks 3-4 meters long. Used for 5,000 operating hours. In like-new condition. EPS Block Molding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production equipment, automatic operation, with mixing of fresh and recycled materials. Reliable, accurate, and easy to operate. Used for 18,000 operating hours. EPS Pre-Expander: Y 2008 Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expansion equipment with automatic weighing and fluidized bed. Reliable, precise. Used for 18,000 operating hours. Bdedpfxszcdqqj Al Uog Steam Boiler Y2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Operating pressure: 12 bar Checked pressure: 19.4 bar Reliable, continuously maintained. Used for 18,000 operating hours.

Condition: used, functionality: unexamined, Used Netzsch thermal analyzer set consisting of a computer with components and software, analyzer (STA 409 EP), controller (TASC 414/3), and power supply (Pu 1.851.405). Manufacturer: Netzsch Model: STA 409 EP | TASC 414/3 | Pu 1.851.405 Bdjdpfx Ajzv Snijl Ueg Voltage: 230V (50/60Hz)

Condition: excellent (used), Year of construction: 2016, operating hours: 7,260 h, functionality: fully functional, Willibald EP5500 Shark waste shredder, manufactured in 2016. In perfect condition and ready for operation, with 7,260 operating hours. Bdjdpfx Aljzrv Hue Ueg

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations Bsdpozgw Ebsfx Al Uedg • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time. Bdjdpfx Aszrg I Aol Uog

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Bjdpezww Siofx Al Uedg Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: ready for operation (used), functionality: fully functional, Stack cutter IDEAL 4850-95 EP WITH AUTOMATIC PRESSING AND BACK GAUGE PROGRAM CONTROL 475 mm cutting length | electro-mechanical knife drive | automatic pressing | electrically operated back gauge with “EP” control module | electronic handwheel with continuously adjustable speed for manual back gauge fine adjustment | optical cutting indicator | pressure bar guided on both sides, controllable independently of the knife | precision back gauge spindle | adjustable back gauge rack with fine pitch and plastic sliders | two side guides each on the front and back table | all-steel knife carrier and adjustable knife guides | complete with base frame and paper stacking table | Electronically controlled, pivoting safety device on the front table; transparent safety cover on the back table; main switch and safety lock with key; two-hand cutting release with repeat lock and simultaneous operation control; 24-volt control; patented IDEAL safety drive; automatic knife and pressure bar return from any position; disc brake for immediate knife stop; knife changing device with covered knife edge; knife depth adjustment from the outside; easy knife change from the front, without removing housing parts. Power connection: 230 V / 50 Hz / Dimensions (H x W x D): 1230 x 755 x 970 mm, Weight: 215 kg, Color: pearl grey. Cutting length 475 mm Cutting height 80 mm Remaining cut 35 mm Feed depth 450 mm Power connection 230 V / 50 Hz Bedozqzxgepfx Al Usdg Our offers refer to used machines, which may show signs of use (minor scratches or discoloration).

Condition: new, Year of construction: 2010, functionality: fully functional, new, unused water treatment system (new in the original packaging) VEOLIA MIDI-RO 10-750-EP year of manufacture 2010 500 liters/hour Bedpfx Aszdri Njl Usdg energy-efficient reverse osmosis system

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 171 h, load capacity: 2,500 kg, lifting height: 3,600 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,360 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Bdedpfx Alozmkmfo Usg Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery type: Lithium-ion Battery year of manufacture: 2021 Battery condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, safety light, lithium-ion technology.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1240024759, overall weight: 545 kg, The ideal machine for curtain wall elements For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 Kg We can ship the machine (On demand) Bdodpozrn N Isfx Al Ujg

Condition: used, Year of construction: 2012, machine/vehicle number: SO141, Used MORETTO EPL 5-8 N blow molding machine - Year 2012Technical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with high repeatability and efficiency. Manufactured by Magic with a full-electric drive concept, it is equipped for industrial packaging and beverage production environments where precision, uptime, and energy efficiency are critical. It suits used bottling line upgrades and second hand equipment integrations requiring robust blow molding capabilities.Blow molding process: Extrusion blow molding, full electricMaximum blown container volume: 8000 cm³Clamping force: 100 kNSpeed: around 200 Unit/hour for ( Distilled water container ) Dry cycle time: 2.2 sOpening stroke: 250 mmMaximum mold dimensions (L × P × A): 425 / 2x130 / 400 mmGeneral electrical power: 15 kWTotal installed electrical power: 64 kWExtruder screw diameter: 70 mmExtruder L/D: 24 L/DExtruder motor power: 35 kWExtruder heating zones: 5Extruder heating power: 10.6 kWSingle extrusion head max die diameter: 100 mmHead heating zones: 4Head heating power: 3.8 kWMachine footprint (W × L × H): 1900 × 5050 × 3250 mmTotal system weight: 7000 kgNoise level: 75 dB(A)Advanced Automation & Control SystemsThe full-electric architecture enhances precision and repeatability while minimizing energy consumption and maintenance compared to hydraulic systems. Fast dry-cycle performance supports higher throughput and stable cycle times. Temperature control across multiple heating zones on the extruder and head ensures consistent parison quality and stable process control for demanding industrial packaging applications.Full-electric drive for efficient, clean operationMulti-zone temperature management on extruder and die headStable, repeatable dry cycle for consistent productionOperator-friendly adjustments and setup for mold changesProcess reliability suitable for stringent quality requirementsProduction Line Integration CapabilitiesThis machine integrates smoothly within a used bottling line or a mixed-manufacturer production environment. It comes with a comprehensive set of auxiliaries to streamline upstream and downstream handling, supporting end-to-end beverage production or industrial packaging workflows.Included auxiliaries: hopper feeders, suction unit, dryer, granulator, cooler, color mixer, conveyorsAuxiliaries brand: Moretto (most components purchased new in 2012)Inline or standalone operation for flexible layoutsSupports diverse container geometries enabled by robust clamping and mold size window... Bsdozrgqkjpfx Al Uedg

Condition: new, Year of construction: 2025, Working width: 25 - 230 mm Working height: 10 - 120 mm Minimum workpiece length: 450 mm Feed rate: 5 - 25 m/min Spindles: bottom, right, left, top, universal Surfacing spindle: 4 kW Both vertical spindles: 5.5 kW Spindle (top): 4 kW Universal spindle: 4 kW Spindle diameter: 40 mm Spindle speed: 6000 rpm Machine available ex works, without tools. Bdedpfxszwvpae Al Usg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Screw Compressor GX5FF EP Main Technical Data (10 bar version): Bdsdpfx Aley H D R Ho Uog Motor Power: 5.5 kW (7.5 HP) Operating Pressure (max.): 10 bar (e) / 145 psi Free Air Delivery (FAD):* approx. 10.0 l/s to 10.1 l/s Sound Pressure Level: approx. 64-66 dB(A) (very quiet due to soundproof enclosure) Cooling System: Air-cooled Duty Cycle: 100% (suitable for continuous operation) Features & Dimensions (Full Feature - FF): Integrated Refrigerant Dryer: Yes (R134a) Tank Size: Mostly mounted on 200L or 500L tank (typical in 2015) Dimensions (approx.): 1430 mm x 665 mm x 1260 mm (tank-mounted) Weight: approx. 198 kg - 310 kg (depending on tank size) Connection: 1/2" G

Condition: used, Year of construction: 2007, Bystronic AFM EP 31-160 - CNC press brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control system - Controlled axes: Y1, Y2, X, R - Laser safety device - Hydraulic crowning - Air bending - Including many tools - Including operating manual - Operating hours: 7266 - Number of bends performed: 315673 - Year of manufacture: 2007 Technical data Bjdpfx Asziduzol Ujdg - Capacity: 160 t - Table length: 3150 mm - Work table width: 60 mm - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke length: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper bending beam: +/- 13 mm - Crowning: Hydraulic - Air bending: Yes - Adjustment of the upper tool: Manual - Adjustment of the die: Manual - Number of fingers on the slide: 2 - X-axis range of the slide: 600 mm - X-axis travel: 600 mm - Min. X-axis travel speed: 400 mm/s - R-axis travel: 150 mm - R-axis rapid traverse: 150 mm/s - Z1-Z2 travel: 2400 mm - Z1-Z2 rapid traverse: Manual - Accuracy of the X-axis: 0.1 mm - Accuracy of the Y-axis: 0.01 mm - Accuracy of R-Z1-Z2: 0.1 mm - Accuracy of Z1-Z2: Manual - Floor-standing installation: Yes - Machine dimensions WxHxD: 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 10,720 h, functionality: fully functional, Willibald EP 5500 Shark in excellent condition and ready for work. Bdsdsy Iwgkjpfx Al Usg

Condition: like new (used), functionality: fully functional, Very nice paper cutting machine for sale. Brand: Ideal. Type: 5221-95 EP, with 9 programs and 230-volt power supply. Comes complete with all accessories. Bsdpfxozlqkns Al Usdg You are welcome to test this machine at our premises. We can arrange transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). If you would like to purchase this machine, please send us your company details and your VAT number. We will then send you a proforma invoice. Best regards, Henk Hoos.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 500 mm, spindle bore: 140 mm, turning diameter: 820 mm, turning diameter over bed slide: 800 mm, GURUTZPE Super AT 400/10000 lathe, with a wider bed than the standard model. This lathe has a 10,000 mm distance between centers and features a single headstock with a vortex system, designed for producing long-length spindles. It has a swing of 820 mm over the bed and 500 mm over the cross slide. The spindle bore diameter is 140 mm, and it can be equipped with a double chuck. It has 24 speeds ranging from 9-500 rpm, with a reduction gear providing speeds from 1-63 rpm. It is equipped with two steady rests and a universal 3-jaw chuck with a diameter of 630 mm. It is in very good overall condition. Bsdszmp Axjpfx Al Ujdg

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, power: 1.9 kW (2.58 HP), year of last overhaul: 2026, SVC-N 150 EP Compact • Weight range 250 g - 1600 g, double piece 500 g - 3200 g • EP computer control, 50 programs, swiveling • Infinitely variable speed via frequency converter • Motor-driven weight adjustment • 600 - 2500 pcs/h • Flour duster • Stainless steel housing • 80 kg hopper with safety grid, laterally swiveling with automatic shut-off function • Mobile • Measuring chamber/drum made of stainless steel (acid-resistant), Teflon piston • Newly painted and completely overhauled (2026) • Optional at additional cost: tipping device (stainless steel version) €950.00 + VAT All prices are subject to VAT and ex works Syke. Available at short notice (shipping possible at buyer’s expense) Advance payment required upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical modifications, and errors. Bedoy N S Hujpfx Al Uedg The photos are sample images of the model.