Used Ercolina Medibender Mb 42T for sale (2,803)

Condition: new, Year of construction: 2026, neu 2026 090209 prompt, Zwischenverkauf v Italien 7780 € 150.15 € 1 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm 42 x 4 mm 42 x 2 mm 42 x 2 mm 50 x 3 mm 54 x 2 mm 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min Gusdpswirzfefx Agpsb 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW Gusdpfxoxab E So Agpob weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE Guedpjxaa Sdjfx Agpjb

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 3620 € 38 mm 245 mm 300 mm 320 mm 23 kg Guedpowiqxiofx Agpjb 19 cm³ 38 x 1,5 mm 38 x 1,5 mm 35 x 3 mm 30 x 2 mm 35 x 1,5 mm 42 x 1,5 mm 42 x 1,5 mm 50 x 2 mm 50 x 2 mm 50 x 4 mm 20 mm 10 x 25 mm 25 x 20 (stehend), 25 x 1 mm 180 mm 36 mm 10 mm 2,8 U/min 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,-

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Gsdpfxsyv I Tko Agpsub Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed

Condition: used, SPECIFICATIONS Drilling capacity steel Ø 35 mm Drilling capacity cast iron Ø 40 mm Tapping M25 Spindle taper Mk 4 Spindle diameter Ø 60 mm Spindle travel 180 mm Max. distance spindle - table 80 mm Min. distance spindle - table 870 mm Floor / table area 700 x 600 mm Power 2.2 kW Gusdsy Hmprjpfx Agpsb Spindle speeds / ranges 65 - 1750 VARIO rpm DIMENSIONS Length 1200 mm Width 800 mm Height 2400 mm

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Gusdew Hx Tvopfx Agpeb Bending speed 10 rpm.

Condition: excellent (used), GRANULATE DEDUSTING Gjdpfx Ajy N R Nbsgpoub We have 5 units available from a company liquidation. Granulate dedusting machines reliably minimize quality risks. The granulate deduster effectively removes fine dust, ensuring a clean and high-quality plastic granulate. This helps you reduce scrap, prevent production disruptions, and maintain consistently high product quality.

Condition: used, Year of construction: 2013, Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Technical data  Capacity: 250 liters per batch Application: Brewing Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) Heating system: Electric Temperature control: Automatic Safety system: Thermal safety alarm Cooling: Plate heat exchanger Electrical supply: 400 V, three-phase Installed power: 15 kW Scope of Delivery  Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmission surface: 0.63 m², Design pressure: 10 barg, Volume: 1.5 L, Design temperature: 0 – 100 °C Malt mill | Sommer | Piccolo 11S | 2013 | Capacity 100–150 kg/h Gusdeyw Abfopfx Agpjb

Condition: used, mileage: 1,001 km, gearing type: other, color: black, empty load weight: 820 kg, first registration: 01/2019, Year of construction: 2019, driver cabin: other, Vehicle location: Bovenden, Capacity approx. 0.5m³, operating pressure >200Bar! Gujdpei Rp H Tofx Agpsb The MB-HDS Scahufelseperator is a real all-rounder! You can process different materials with a single device and only have to change the shafts. For more information about the product, please contact us! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Excellent condition Year 2006 Gedpou H Ibnofx Agpoub Foot Pedal Weight 193kg Power supply - 415v/3 phase

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,600 mm, conveyor belt width: 600 mm, discharge height: 1,000 mm, Equipment: documentation/manual, type plate available, L=360cm Gsdpfx Ageyf Nk Iepsub W=60cm H=100cm

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. Guedpfxexabm Ne Agpjb - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch Guodpfoxabl Sex Agpjb

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt Godjxaatnopfx Agpoub - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min Gedpexaafqefx Agpeub spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Year of construction: 2011, condition: ready for operation (used), overall weight: 700 kg, This ERCOLINA Megabender TOP 030 die bending machine was manufactured in 2011. It features a maximum pipe diameter of 2" (60.3 mm) and a pipe slide length of 3,000 mm. With 30 programs and the capability to work with various materials, consider the opportunity to buy this ERCOLINA Megabender TOP 030 die bending machine. Contact us for further details. • Maximum pipe diameter: 2" gas pipe (60.3 mm) • Pipe slide length: 3,000 mm • Programs: 30 programs × 9 bending angles + correction angle • Material capability: • Stainless steel up to 2 mm • Steel up to 3 mm • Copper and aluminum up to 4 mm • Working hours: 150 h Guedpfx Agoyiavmopob Additional equipment • Included mandrels: • 60.3 mm × 2 mm • 50 mm × 2 mm • 40 mm × 2 mm • 32 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Folding machine "Multimaster CAS 35/2 -PBA"\nYear of production: 2007\n\n2-buckle folder\nFeatures: - computer control - automatic buckle adjustment\n- program memory\n- double sheet control\n- sheet travel control\n- automatic delivery unit adjustment\nTechnical specifications:\n- Size: max. 35x46 cm; min. 8.5 x 10 cm\n- Fold length: max. 36 cm; min. 5 cm\n- Paper weight: 40 to 250 g/m2\n- Output: 160 m per minute (depending on paper)\n- Power: 230 V / 10 A\n\nPrice on request Godpfxeyu Spfo Agpjub

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Gsdpoxrb Rfefx Agpoub Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V Gjdpfoyhnc Iex Agpjub -Dimensions: 95/70/H35 mm -Weight: 0.4 kg

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  Brewhouse capacity: 500 L Configuration: 3 kettles + hot water tank + cold water tank + boiler Steam heated Cooling capacity: 35.8 kW Scope of Delivery  Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler Steam Generator | GG-Technik | TD9 | 2016 | 5 kW Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel Compressor | CompAir | WinVOM L15 7.5 | 2001 | — Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel Air Dryer | — | E2000 | 2001 | Air drying unit Guodjyg R Dljpfx Agpjb

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Lücht & Palm Type: MB Note: Due to the hot-dip galvanized finish, the racks are suitable for outdoor use. Scope of delivery includes: 16x Pallet Rack Uprights, used Material finish: hot-dip galvanized Frame profile dimensions: U 120 x 50 x 5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (welded truss construction) Height: 4,000 mm Depth: 900 mm 59x Pallet Rack Beams, used Material finish: hot-dip galvanized Profile: IPE 120 x 64 mm Clear span: 5,015 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 16x Frame Connectors, used Material finish: hot-dip galvanized Profile: L 40 x 40 x 4 mm Clear width: 200 mm 64x Anchor Bolts, new Manufacturer: Hilti Model: HST2RM12x105/10 Design: Stainless steel 32x Shims, used Finish: galvanized For leveling the rack uprights installed on uneven floors 01x Load Sign Gsdpfxjult Sze Agpeub With field and bay load information, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Incl. mounting material Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If you require transport or shipping beyond this, additional costs will apply, which can be quoted individually depending on the delivery location and scope of delivery.

Condition: new, We offer you here a new pallet rack traverse for sale. Due to the hot-dip galvanized surface these traverses are suitable for outdoor use. Technical data of the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery: 01x pallet rack traverse, new Material colour: hot-dip galvanized IPE profile: 120 x 60 mm Execution: head traverse Agraffe: 2 HK (hooks) clear width: 1.800 mm max. load per truss pair 3,600 kg, with evenly distributed load 1x set HV-set EN14399-4 - EN14399-6 10.9 Hexagon bolt with nut and washers and washers for HV-connection Material colour: hot-dip galvanized Gujdpjhg Tkkofx Agpsb These cross beams have an upstand welded on for the for the storage of shelf grids. (Height: 40 mm / Material thickness: 4 mm)

Condition: good (used), functionality: fully functional, Year of construction: 1980, operating hours: 6,000 h, power: 92 kW (125.09 HP), motor manufacturer: Mercedes, gearing type: mechanical, fuel type: diesel, maximum speed: 40 km/h, first registration: 11/1980, next inspection (TÜV): 11/2026, color: light green, machine/vehicle number: 44316100011477, Equipment: additional headlights, cabin, hydraulics, For sale: MB Track in top condition. Brakes, MOT, and oils all newly serviced. Drives perfectly. Gross price: €62,135. VAT is not deductible. Gjdpfov U Nxtox Agpjub

Condition: new, tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU tube diameter 2" x 3.91 mm GAS bar material - diameter 35.0 mm revolutions per minute 2.0 U/min bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 230 V total power requirement 1.5 kW weight 76.0 kg range L-W-H 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model "M" = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base Godpfxex Urtlo Agpsub BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE