Used Esterer Frame Saw With Oscillating Frame for sale (13,723)

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. Hjdpfx Apjyl Afrenjfg WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Hfedpfx Apjyhduyjneg Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates with fence Hfsdpfx Asqpdi Uopneg immediately available Location: Austria, near Klagenfurt

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) Hedjw Dn S Aopfx Apnefg The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Year of construction: 1980, condition: used, passage width 560 mm passage height 560 mm stroke 600 mm Speed max. 320 1/ min. Hedpfxscvhnde Apnjfg The creel is completely mechanized with new Moehringer high speed infeed.

Year of construction: 2011, condition: used, machine/vehicle number: .09045, max. operating pressure: 6 bar, with extraction unit, type: LAS-A-X10, automatic stop, extended conveyor belt, aluminium frame storage shelf, and frame marking unit, manufacturer: EBS, type: 6200P, year of manufacture: 2014 with digital display Hfsdpfx Apjy Aqbkenjg

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, Wet sharpening machine for Frame Saws Hedjy Rq T Aspfx Apnofg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, warranty duration: 12 months, The POWER Plus Thin Cutting Frame Saw was developed to be affordably priced for companies with medium to small production needs. The machine has a sturdy, solid cast iron base and is equipped with a 15 kW (20 HP) main motor. The Frame Saw cuts solid wood blocks into gluable slats with minimum saw kerf waste. The machine can run products up to 150 mm in width and 250 mm in height. The POWER Plus Thin Cutting Frame Saw provides the smaller manufacturer a high performance and quality machine for the production of their veneer slats/lamellas; all for an affordable price. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. Hsdpfjy Rk Umox Apnofg Features: High precision lamellas with gluable surface in tolerance ± 0.1 mm, depending on lamellas width The "Plus" System is designed for quick set-up and easy adjustment of the top pressure rollers via electrical motor Air Blast system located directly behind the saw blades keeps the saw blades clean and prevents heat build-up Automatic Opening of the machine for safe and easy removal and installation of the saw frame Sturdy and durable Cast Iron Saw Frame Carriage no play mounted on linear guides Feed roller movement is synchronized with the up/down movement of the saw frame Modular Infeed can accommodate a center guide, side guide or channel system Chip Breaker prevents splintering on the bottom side of the wood Solid cast iron machine construction minimizes vibration Top and Bottom Driven Feed Rollers Automatic Central Lubrication Unit Solid Steel Crank Arms On demand Features: Top and Bottom Planing Module on machine outfeed Air Jet system for cooling with extra ventilator Top Planing Module on machine infeed Automatic Hopper Feeder Wet Way Cutting Option Blades Tension Master

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Hodpfx Aoxz Dqmjpnofg Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Hfedpfx Apsxw Ubnsnsg

Condition: good (used), WD creel type GXW 71, with spherical roller bearing in the main shaft. Suitable for all base plates of GXV and GXW creels. Fully hydraulic. With hydraulic saw tensioner. Hfsdeuql Ilepfx Apnsg Ideal as a replacement sash gang or swing replacement.

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Hfodpfsxw Uf Tex Apnsg

Condition: excellent (used), 2 pieces stilts for Esterer creel type EHD 30. Hfjdjip Uf Uspfx Apnog Only 6 years in use. Also for other Esterer creel types stilts and spare parts available.

Year of construction: 1999, condition: excellent (used), 1. Linck FWK Quick Clamp Carriage Gauge: 900 mm Travel speed forward/reverse: 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Log diameter: 150–700 mm 2. Linck CV1/SE 600 Full Frame Saw with Variable Width Adjustment Passage width: 760 mm Passage height: 710 mm Hfsdpjxtwv Tofx Apnsg Saw stroke: 600 mm 3. Removal Device Bm 1/Mbh 4. Side Material Cross-Cut Saw Linck KA 1/ACF Year of manufacture: 1998. Commissioned: 2000 Various tools Sale by customer order.

Condition: good (used), functionality: fully functional, High-Performance Frame Saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained high-performance full frame saw Frame clearance: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Hedey D Hitspfx Apnsfg Hydraulic saw tensioner and blade suspension Drive motor and gear unit Electrical control cabinet with control system Splitter wedge type AVER, hydraulically driven In very good condition (optionally COMPLETELY REFURBISHED!) Top condition with remote-controlled tensioning carriage

Condition: used, Frame Saw Esterer S71 700 mm frame width 500 mm stroke with frequency-controlled feed with saw blades with hydraulic saw tensioner (+spare bar) with drive motor with intermediate gear with riving knife (Arta-C) Location: Germany, near Chiemsee Hfedpfey Da Ensx Apnjg

Condition: reconditioned (used), functionality: fully functional, Hydraulic sharpening machine for frame saws. Grinding wheel diameter 250 mm. 4 built-in, switchable tooth profiles. 3 feed speeds. Hsdpfx Apoyvtqnenjfg

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Hjdpfx Apeyhzhhsnofg Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: new, 1 brand new horizontal band saw with swivel frame and double mitre R/L Make: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting capacity: Round: 230 mm Rectangle: 320 x 130 mm Square: 230 mm -45° Round: 180 mm -45° Flat: 230 x 100 mm -45° Square: 150 mm +45° Round: 210 mm +45° Flat: 230 x 160 mm +45° Square: 180 mm +60° Round: 120 mm +60° Flat: 120 x 100 mm +60° Square: 100 mm Table height: 760 mm Main drive motor power: 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power: 0.12 kW 2 blade speeds: 35 / 70 m/min Saw blade dimensions: 2730 x 27 x 0.9 mm Dimensions (L x W x H): 1350 x 700 x 1300 mm Weight: 415 kg Accessories / Special features: • Double mitre cuts left/right via a swivel frame o The workpiece remains stationary during cutting! o No need to turn the material for mitre cuts! o High efficiency with substantial time savings! • Precision stops preset at 0°, 45°, and 60° left, and 45° right • Replaceable worktable • Quick-release vise, adjustable side-to-side (left/right) • Adjustable length stop 500 mm for repeat cuts • Saw arm lowering infinitely variable via hydraulic circuit • Coolant system Hsdsfk Ew Espfx Apnjfg • Chip brush • Swivelling control panel • Electric safety switches for blade tension and blade guard • Automatic cut-off at end of cut • Emergency stop switch • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Hfjdpfx Ajg U Uv Ropneg length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Year of construction: 2026, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Hfsdpfx Apsd Hx Uqjnog

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Hfjdsvcqanopfx Apnjg For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2004, condition: ready for operation (used), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800rpm. On-site inspection is possible. Hjdpfx Apewu Ez Nsnjfg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Hfodpfx Aevz E Nuopnjg Weight 2400 kg Total power requirement 16 kw

Condition: new, Year of construction: 2026, functionality: fully functional, on stock! The GAP 100 automatic profile sharpening machine sharpens your gang saws and features a compact, extremely stable design, high functionality and excellent value for money. Highlights Hodpfx Apeg Uzl Eonjfg Hydro pneumatic return stroke of saw carriage Pneumatic saw blade clamping Precision linear guide for saw carriage Precision spindle height adjustment for saw blade width Fully enclosed protection hood with powerful water-cooling Feed speed regulator with frequency converter Grinding wheel dressing device Dust mist exhaust Lever control for 3 different tooth shapes Continuous tooth pitch adjustment Speed regulator for grinding wheel Optical signaling device for process status recognition (3-color signal lamp)