Used Flaschentisch Sidel for sale (181)

Condition: used, 1,40 x 4,50 Höhe 1.10 Iisdpfjz Sdtiox Am Djh

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr Iiedjg Ailcspfx Am Djh CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational. Iisdpfxjyb Tuio Am Doh   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Iiodpfjutni Rox Am Dsh Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Condition: Used line Iijdpfez Ri N Esx Am Dsh Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Iedpeyyb Snsfx Am Dsih Technical data - Capacity: approx. 18,000 bottles/hour - Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L - Application: Roll-fed labelling of PET bottles - Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing - Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  - Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates - Cooling unit | Kelvin Cool-Power | External cooling unit - Control system | Control panel with process indicators

Condition: excellent (used), SIDEL / HEMA SF Classic MV2 Volumetric Filler SIDEL / HEMA SF Classic MV2 automatic volumetric filler, designed for the precise dosing and filling of food products into containers within continuous industrial production lines. The equipment uses a volumetric filling system, allowing control over the amount of product introduced into each container and maintaining uniform dosing throughout the production process. The SF Classic MV2 incorporates a product feeding hopper, automatic container transport, and a control system with a Siemens HMI, offering an automated solution for professional filling applications in the food industry. MAIN FEATURES Ijdpfx Amszw Dgyj Dsih -Manufacturer: SIDEL / HEMA -Model: SF Classic MV2 -Type: Automatic volumetric filler -Volumetric dosing system -Automatic product feed -Integrated product hopper -Automatic container handling -Integrated infeed and outfeed conveyor -Automatic container positioning -Control panel with Siemens HMI -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial operation -Integrable into automatic filling and packaging lines APPLICATION The SIDEL / HEMA SF Classic MV2 is designed to automatically dispense a controlled volume of product into each container. The product is fed from the top hopper to the volumetric system. The containers arrive automatically via the conveyor, are positioned in the filling area, and receive the set amount of product before continuing to the next stage of production. This system is particularly suitable for applications where dosing consistency, automated filling, and continuous operation are required. It can be integrated with: Product feeders Container conveyors Seamers and cappers Can closers Cap feeders Weight checkers Inspection equipment Labeling and coding machines Packaging equipment and end-of-line equipment Complete automatic filling lines APPLICATIONS Especially suitable for canning industries, food manufacturers, sauce producers, food preparation companies, and other processing plants that require an automatic volumetric filling system. Depending on the installed configuration, it can be used for different liquid, semi-liquid, viscous, or particulate food products, adapting to the specific product and container format. The combination of SIDEL / HEMA technology, volumetric dosing, and automatic container handling makes the SF Classic MV2 a particularly interesting solution for continuous industrial filling lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Iiedpfxowa Rhro Am Dsh Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Iisdjyb Tucopfx Am Deh Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series

Condition: used, Year of construction: 2000, Overview  Iijdeyb Tbpspfx Am Dsh This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data - Capacity: - 7,600 bph on 1.0 L - Formats: - Neck finish 29/21 - Preforms processed: RPET Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Sidel caterpillar oven - 6 heating modules - Sidel preforms tipper - Sidel preforms hopper & feeder - Sidel preforms infeed rail - Sidel caterpillar oven & blowing wheel - Solenoid valves Sidel Universal type - Sidel PCC version V2.02 - Sidel CE electrical cabinet (Siemens) - Service history: - Sidel maintenance completed September 2024 - Elongation sensor retrofitted - Additional service by client’s technicians Scope of Delivery  - Stretch blow-moulder SIDEL SBO 6 Series 2 - Preforms tipper - Preforms hopper & feeder - Preforms infeed rail - Caterpillar oven & blowing wheel

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. It is already packed in seaworthy export crates. Techn. Details - Capacity: 7.200 bph in 1,5L - Number of moulds:  6 (molds not included) - Equipped with quick change for shell molds - Number of heating modules: 10 modules - Neck personalization: 29/25      - Working hours: 47.000 only         - Machine was regularily maintained       - Retrofitted by the previous owner in 2020 - Machine equipped with:            - Sidel preforms elevator to unscrambler - Sidel preforms unscrambler & feeder - Sidel oven & blowing wheel for 6 molds - Sidel electrical cabinet - Sidel PCC drive & control panel Ijdpfx Amorkgy Us Deih - Big set of spare parts list upon request

Condition: used, Year of construction: 2006, Overview This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Isdpfxszxtzij Am Deih Condition Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.

Condition: used, Year of construction: 2007, Overview This complete PET bottling line was built by leading European manufacturers including Sidel, Sacmi and Sarcmi. It is designed for still and sparkling water and is also suitable for soft drinks. With a nominal output of 19,000 bottles per hour for 0.5 L and 16,000 bottles per hour for 1.5 L, it covers the full process from preform blow moulding through filling, labelling, shrink wrapping and palletizing. The core of the line is a Sidel SBO Universal 14 blow moulder (2007) feeding a Sarcmi Azzurra 70-14 isobaric filler and a Sacmi Opera 200 RF rollfed labeller. Technical data - Line type: Complete PET bottling line - Different manufacturers: Sidel, Sarcmi, Sacmi, Zalkin, Zambelli, Comag, Acmi, Robopac - Years of manufacture: 1986 - 2019 - Nominal output: 19,000 bph (0.5 L); 16,000 bph (1.5 L) - Product: still and sparkling water, also suitable for soft drinks - Container: PET bottles 0.5 L and 1.5 L - Cap: Alaska PCO 1881 - Label: OPP rollfed - Packaging: shrink film - 0.5 L 3x2 and 4x3, 1.5 L 3x2 - Palletizing: Euro pallet 800 x 1200 and 800 x 600 Scope of Delivery - Blow Moulder | Sidel | SBO Universal 14 | 14 cavities; incl. Lanfranchi preform tilter, hopper and air recovery system | 2007 - Air Conveyors | NTS | Double chamber, approx. 60 m, 2 air fans - Filler | Sarcmi | Azzurra 70-14 | 70 isobaric filling valves, pitch 110 | 1988 - Capper | Zalkin | 14 capping heads | 1988 - Saturator | Rivi Eng | Carborivi | 30,000 L/h | 1986 - Labeller | Sacmi | Opera 200 RF | OPP rollfed, 18 plates, non-stop automatic reel change | 2011 - Cap Ink Marker | Linx | 8900 | marking on bottle cap | 2019 - Shrink Wrapper | Zambelli | LFT70 | single track with 1-to-4 track channelizer | 2004 - Handle Applicator | Comag | H 65/1 | cardboard handle, single track | 1999 - Palletizer | Acmi | Rasar P130 | double-head, incl. pad and pallet magazines | 1996 - Pallet Wrapper | Robopac | Genesis | ring wrapping, pallet presser, waterproof covering | 2000 - Conveyors | Procomac / Comag | bottle and pack conveyors, SEW / Selpee motors, Procomac cabinet with Pro-face touch panel Condition Used line, well maintained with extensive annual overhauls by the manufacturers. Currently still installed and under power. The line can be viewed on request. Availability Ijdpfx Aezlqzmjm Djih Available from 12 October 2026. Location: Italy.

Condition: used, Year of construction: 2005, Overview This SIDEL FILLING S.r.l. E-JET 40 is a rotary rinser for glass bottles, equipped with 40 rinsing valves (pitch 113 mm). It currently operates within a complete cider filling line and handles glass formats from 25 cl to 1.5 L. A separate water filtration system with manifold piping, pressure gauges and manual valves is included. The machine is enclosed in stainless steel framing with transparent safety guards and features rotary bottle handling with starwheel transfer. It is still installed and under power, remains in production until end of October 2026, and can be visited in operation on request. Technical data - Manufacturer: SIDEL FILLING S.r.l. (Parma, Italy) - Model: E-JET 40 - Year of manufacture: 2005 - Machine type: rotary bottle rinser, glass - Rinsing valves: 40 (pitch 113 mm) - Products: cider, carbonated beverages - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 18,000 bph (0.33 L), approx. 14,000 bph (0.75 - 1.0 L) - Dimensions: approx. 290 x 240 x H 230 cm - Weight: approx. 3,400 kg - Power: 6.5 kW installed (400 V, 50 Hz) - Air: 6 bar operating, approx. 100 Nl/min - Water: 3 bar, approx. 2,500 l/h Equipment - Water filtration system with manifold piping, gauges and manual valves - Spare parts package - OEM technical documentation and machine layout drawing Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW). Iiedpfx Amezidx Hj Djh

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Iiodpjrazwrjfx Am Djh

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Iedpfxjnpbhvj Am Deih

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Condition Iiodpfszrhr Aox Am Djh Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Bottle Table with Motor Iodpfxjz Ri Nfj Am Dsih Length 2.2m Wide 1,8m

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Ijdpez Ev A Tofx Am Dsih Platform height: 880 mm

Condition: used, functionality: fully functional, machine/vehicle number: 105000002, Year of construction: 2001, operating hours: 2,600 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, fork length: 1,600 mm, empty load weight: 8,800 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,200 mm, Sideload forklift Chassis number: 105000002 ISO class: ISO class 3 = 2,500 - 4,999 kg Iodpfx Amsy Ety Ue Deih Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Normal Description: Steinbock 557 side loader, year of manufacture 2001, only 2,600 operating hours. Robust and reliable piece of equipment, ideally suited for use in industrial environments, warehouses, and timber handling. Its solid construction, straightforward technology, and high load capacity make this side loader a long-lasting asset for everyday operations. Used condition with age-related wear, technically ready for use. Export price: €7,400.00 Inspection and test run available by appointment. Errors and prior sale excepted.

Condition: used, functionality: fully functional, machine/vehicle number: 6323, Year of construction: 2004, operating hours: 9,825 h, load capacity: 4,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,850 mm, fork length: 1,400 mm, empty load weight: 7,250 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,150 mm, Side loader Chassis number: 6323 Load centre: 700 Fork width: 150 mm Fork thickness: 60 mm Mast type: Duplex Iodpox Ekyfefx Am Doih Transmission: REX ROTH A4VG71 Condition: Refurbished with warranty Technical condition: good Front tyre type: Pneumatic Front tyre size: 27x10-12 Front tyre condition: 40 - 60% Rear tyre type: Pneumatic Rear tyre size: 27x10-12 Rear tyre condition: 40 - 60%

Condition: used, functionality: fully functional, machine/vehicle number: 6862, Year of construction: 2006, operating hours: 11,697 h, load capacity: 4,000 kg, lifting height: 6,300 mm, free lift: 2,070 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 62 kW (84.30 HP), fork length: 1,600 mm, empty load weight: 7,350 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,350 mm, Sideloader Chassis number: 6862 Load centre: 800 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Isdex Ekzcspfx Am Doih Speed class: 20 Condition: Refurbished with warranty Technical condition: good Front tyres type: Pneumatic Front tyres size: 27x10-12 Front tyres condition: 40 - 60% Rear tyres type: Pneumatic Rear tyres size: 27x10-12 Rear tyres condition: 40 - 60% Fork positioner,

Condition: new, Parts for the SIDEL blow molding machine bearings O ring nozzle Iiedpfx Aeiqum Iem Djh strap sealing axis

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side Loader Load center: 700 Fork width: 160 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Air Iijdpfsz Ev U Nox Am Dsh Front tire size: 27x10-12 Rear tire type: Air Rear tire size: 27x10-12 Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We are also happy to buy your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed information about this HT5KU. P.S.: Our forklift workshop specializes in repair, refurbishment, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale at our location. 1x NIVO fork; telescopic forks 1360 / 2360 mm Heater, full cabin, Platform height: 820 mm

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,233 h, load capacity: 5,000 kg, lifting height: 5,450 mm, free lift: 560 mm, fuel type: diesel, mast type: simplex, construction height: 3,550 mm, power: 65 kW (88.38 HP), fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,300 kg, total length: 4,480 mm, drive type: Diesel, construction width: 2,150 mm, Side loader Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Iiodpfx Amozz Dv Ne Djh Front tire size: 300-15 Rear tire type: Superelastic Rear tire size: 300-15 Description: Operating hours recorded. Inspection possible by appointment. Transport options available. For further questions, please call. Rear work lights, front work lights, roof protection, windshield, half cab, heater, full cab, rotating beacon, windshield wiper, seat.