Used Fliegl Tandem-Seitenkipper Tsk 210 T - 5 Meter for sale (99,824)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Fedpfszd Eynjx Al Ssgh with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Year of construction: 2026, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are carried out individually to customer specification. #Chassis – centre-axle tipping trailer - Steel welded construction, continuous rear tipping shaft with 80 mm ball-type tipping bearing - Geared support leg at front - Foldable rear support - 2 wheel chocks with holder - Steel rear underrun protection - Mudflaps at rear, full width - Quarter-shell mudguards - Lockable storage compartment for loading ramps beneath the load bed - 1 plastic tool box with removable tray, w=620/h=360/d=440 mm, lockable with a padlock - Note: side board touches the storage box when folded down - Lockable storage compartment for loading ramps beneath the load bed - Drawgear for centre-axle trailer - Drawbar with approved 40 mm tow eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles & suspension - SAF drum brake axles - "Laser-aligned axles/running gear" – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free rubber-steel bushings and mechanical axle-load equalisation (rocker equalisation) #Wheels & tyres - 285/70 R 19.5" - Manufacturer's choice - Steel rims, factory silver #Braking system - 2-line air braking system - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, with connecting lines to the towing vehicle - ABS and ALB, with ABS socket at front, with connecting cable - Caution: this trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! #Electrics - 24 V, multi-chamber lights, yellow LED lighting on the sides - 2 white position lights at front - 2 white/red outline marker lights at rear - 2 x 7-pin anti-mismatch plugs at front, with connecting cable #Hydraulics - Three-way tipping gear, hydraulic multi-stage telescopic ram with stroke limiter and safety cable - Low-pressure cylinder up to max. 170 bar, without restrictor valve; to be retrofitted on the truck if required - Hydraulically operated via the truck's PTO - Hydraulic connection with quick-release coupling, DN 10/3, incl. connecting hose #Tipping body - Sturdy tipping body with 4 mm steel sheet floor, steel side-board structure, continuous side walls, foldable and pivot-mounted with central locking at the bottom; rear corner posts, plug-in type; tailgate foldable and pivot-mounted, with central locking at the bottom - Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom - Side-board return springs - Platform width 2,420 mm - 5 pairs of lashing eyes in the floor, 5 t each Fjdozd D Scspfx Al Sogh #Operating notes - The stated gross vehicle weight is technically achievable; depending on the load, it may not be reached while observing the permissible axle, support and fifth-wheel loads #Country of registration/plates - Country of registration: Germany - With DEKRA inspection and certificate (in accordance with §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear #Paintwork - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation" - Side boards/platform painted in colour of choice - Bespoke transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,370 mm, loading space height: 900 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 2,350 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. *Chassis – Tandem Three-Way Tipping Trailer Welded steel chassis construction Continuous rear tipping shaft with 100 mm spherical tipping bearing Two-speed landing gear at the front Foldable rear support legs Wheel chocks with holder Steel underrun protection Quarter mudguards in front of and behind each axle Anti-spray mud flaps behind each axle Lockable storage compartment for aluminium loading ramps beneath the platform 1 pair of aluminium loading ramps, approx. 3,600 mm long and 400 mm wide, load capacity 8,000 kg per pair Plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with padlock *Drawbar Drawbar with certified towing eye *Axles & Suspension BPW drum brake axles Air suspension with raise-and-lower valve *Wheels & Tyres Fgjdpszcyl Refx Al Soh 385/55 R 22.5 tyres, manufacturer's choice Steel rims, factory silver finish *Braking System Dual-line compressed air braking system Spring-loaded parking brake Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable *Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable front plugs with connecting cable *Hydraulic System Three-way tipping mechanism Hydraulic multi-stage tipping cylinder with stroke limiter and safety cable Hydraulic connection with SVK coupling NW 10/3, including connecting hose Hydraulic operation via truck PTO (power take-off) *Tipping Body 4 mm HB 400 steel floor Rear spherical tipping bearing, 100 mm diameter Steel side walls, drop-down and pendulum-mounted, with central locking at the bottom Front wall and side walls approx. 800 mm high Steel rear wall approx. 600 mm high, designed as a combination pendulum tailgate Side wall return springs 4 pairs of external lashing rings in the floor, each rated at 3 t 2 pairs of recessed floor lashing rings, each rated at 5 t *Registration & Compliance Registration country: Germany DEKRA inspection and certification included 24/7 service hotline Prepared for single-line licence plate holder Reflective contour markings according to ECE R048 (white on the sides, red at the rear) Rear warning plate according to ECE 70 *Paint Finish Chassis: galvanised or painted according to customer requirements Body and side walls: painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation Fgedpfx Aozcv Stel Seh "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 399, functionality: fully functional, Equipment: documentation/manual, Thibaut multifunction machine for processing natural stone Monoblock design (no foundation required) Spindle speed: 250 - 10,000 rpm Automatic vertical oscillation Vertical motorised fine adjustment of the spindle Tool holder: SK 40 Pneumatic contact pressure 300 mm spindle height adjustment 100 mm pneumatic height adjustment Fsdpfx Asy Iu Ixol Sjgh X-axis travel: 3,400 mm Worktable with tilting adjustment Worktable size: 3,000 mm x 970 mm Articulated arm locking system Marble grinding plate (receptacle 3 x Frankfurt type) Includes tools and arbors

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Fgedpok E Tdaefx Al Soh Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: used, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2021, next inspection (TÜV): 02/2027, loading space length: 5,200 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2021, Equipment: ABS, Well-maintained and rarely used three-sided tipper with a low-loader design. Features: Combination door and hinged flap at the rear Spring-assisted lifting mechanism on the side walls Side walls with hinged support Fedpfx Aoznhr Ijl Sjgh Aluminum access ramps stored under the tipper Numerous lashing points Tire condition: approx. 70% Please call for any questions regarding the equipment. Errors and prior sale excepted!

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request Fjdpfjz Ipkcjx Al Sogh

Condition: used, axle configuration: 3 axles, first registration: 07/2005, color: other, Year of construction: 2005, Empty weight: 4.200 kg Fgedpfx Ajzxz Iwol Sjh Axle 1: left 4-8 mm right 10-10 mm Axle 2: left 10-10 mm right 12-12 mm Axle 3: left 4-8 mm right 4-4 mm We have the possibility to stack trailers!

Condition: new, empty load weight: 3,020 kg, maximum load weight: 8,640 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,950 mm, suspension: other, color: white, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - Fliegl three-sided tipping trailer, type TSK 118, new vehicle, delivery time on request - Aluminum ramps optional, 1,800 EUR net - Price with ramps: 22,700 EUR plus VAT - Factory new - Frame hot-dip galvanized - Permissible total weight: 11,800 kg - Unladen weight: 3,160 kg - Payload: 8,640 kg - Overall length: 6,950 mm - Overall width: 2,550 mm - Platform dimensions: L 5,000 mm, W 2,420 mm, loading height: 950 mm - Steel welded construction - Support leg at the front - Folding rear support (aluminum ramps optional, 1,800 EUR net) - Underrun protection, steel - Continuous mud flaps at the rear - Lockable storage compartment for loading ramps below the loading platform - Towing eye, 40 mm - Drawbar, height-adjustable - BPW axles - "Chassis laser-aligned" to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization - 235/75R17.5 tires - 2-line pneumatic braking system, manual parking brake - ABS and ALB - Stable tipping platform with 4 mm steel sheet floor - Side walls foldable and pivoting with central locking - Corner posts at the rear, plug-in type - Rear wall foldable and supported with central locking - 5 pairs of lashing points in the floor, each 5 tons - Contour marking with reflective strips - Frame hot-dip galvanized, 15-year warranty against rust - Platform color: RAL 9010 pure white - Errors and prior sale excepted! - More information, additional XXL pictures, directions, can be found on our website at: ... VAT can be shown, ABS, new, very good condition, HSN 7951, TSN 000, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Fgjdpfjzv Nrljx Al Soh

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Fodpfsz I Snkex Al Ssgh Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: ON-68-FS

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,995 kg, maximum load weight: 16,005 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 8,450 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Center-Axle Trailer Fine-grained steel welded construction 2-speed gear-supported landing leg at the front Folding rear support 2 jockey legs with holder Aluminum side impact protection Splash flaps at the rear, spanning the entire width Quarter panel fenders in front of and behind each axle with anti-spray splash flaps according to EC regulations 1 aluminum storage box with stainless steel flap Container locking mechanism, 1 pair of recessed locking recesses in the floor for 1 x 20 ft container, 1 pair of container locking adapters Extendable widening sections to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3000 mm Tie-down points, low-bed trailer 1 pair of tie-down brackets additionally at the front in the front cross member, 10 tons each 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) 7 pairs of tie-down cleats recessed on top and on the side in the outer frame, 10 tons each Coupling system, center-axle trailer Drawbar with tested 50 mm tow hitch Axles + Suspension Drum brake axles, according to the manufacturer's choice "Axle/chassis laser aligned" reduces tire wear and fuel consumption Axle distance 1810 mm Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Parking sockets for ABS/EBS and air connection on the drawbar or drawbar 24 Volt EBS, electronic braking system with EBS connector at the front with lift and lower valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the cab "TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the display in the towing vehicle, via EBS Wheels and Tires 235/75 R17.5, manufacturer's choice Protective caps for wheel studs Electrical System 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side, coupled with the turn signal "Flashing side marker lights" Premium LED side marker lights, with "20 LED diodes per light" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connection cable Parking sockets for electrical system on the drawbar Fgodpszcvt Rjfx Al Ssh LED work lights on both sides 2 additional LED work lights at the rear 1 LED rotating beacon with holder, switched via sidelights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor thereafter with approx. 70 mm soft wood flooring, in the wheel arch area steel/diamond plate flooring Rear inclination with "Mega Grip surface" made of interlocking grating Low-bed area including rear inclination 6,500 mm Front panel / corner posts Aluminum profile, approx. 400 mm high, plug-in Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Ramp surface with "Mega Grip" made of interlocking grating Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left side Hydraulic side displacement of the ramps, individually controllable Hydraulic connection with quick-release cou

Condition: used, empty load weight: 3,690 kg, maximum load weight: 9,810 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, suspension: air, tire size: 285/70R19,5 148J, color: other, gearing type: other, front tire size: 285/70R19,5 148J, rear tire size: 285/70R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Fgsdpfoz H T Tfsx Al Soh

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013325, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, The images shown are archive images. The vehicle may still be in use. Fgodpfx Aljzadb Do Ssh Chassis: Central axle trailer, low-bed Fine-grained steel welded construction Gearbox support leg at the front Telescopic rear support Chocks with holder Mudguards made of steel sheet over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin connector at the front, with connecting cable Bridge TTS Low-lying steel pan, bridge floor made of steel/non-slip steel plate, steel walls solidly welded to the floor Bridge length 5500 mm Pan at the front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight undulation of the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons Additional pair of lashing eyes in the floor, each 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/non-slip steel plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor handling and tracking behavior possible due to incorrect load distribution) Country of Registration/Signage Country of Registration: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images shown are archive images. The vehicle may still be in use.

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) Fgedpfx Aex D Nlusl Ssh • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Fsdpfezcnugox Al Segh Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Custom-made transport solution

Condition: used, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2026, total length: 7,350 mm, total width: 2,550 mm, total height: 2,300 mm, Year of construction: 2012, Equipment: ABS, * Air suspension * Disc brakes * BPW axles * Support on the drawbar Fjdpfxezwym Ns Al Ssgh * 50 mm eye * Spring-assisted side flaps * and more.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, Please note that the images are archive images! The vehicle may be in use. Additional information: Chassis: Central axle semi-trailer, low-bed Fgsdpfx Aljqmc Rae Sjh Fine-grained steel welded construction, geared support leg at the front, telescoping rear support, chocks with holder, mudguards made of sheet steel over both wheels Coupling device: Central axle semi-trailer Drawbar with tested 40 mm drawbar eye, drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes, axle/chassis laser-aligned, reducing tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking system 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable Platform TTS low-lying steel trough, platform floor made of steel/checkered plate, steel walls welded solidly to the floor, platform length 5500 mm, trough with Load-Lock profile at the front and on the sides for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight unevenness in the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel trough and 1 x at the rear in the floor, each 5 tons. Additional pair of lashing eyes in the floor, each 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handrail on the ramps, covered with wood, with gas spring for single-person operation Operating instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Registration country/signs Registration country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may be in use.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 01/2000, loading space length: 9,200 mm, loading space width: 2,400 mm, total length: 10,070 mm, total width: 2,480 mm, wheelbase: 6,700 mm, Year of construction: 2000, Axle configuration Rear axle 1: Max. axle load: 1750 kg Rear axle 2: Max. axle load: 1750 kg Weights Unladen weight: 2,340 kg Payload: 2,660 kg GVWR: 5,000 kg Functional Body manufacturer: Masta Dieplader Be Oplegger Openlaadbak Load bed height: 65 cm Maintenance, history and condition APK (Technical Inspection): valid until 04.2027 Technical condition: good Visual condition: good = Company Information = Fsdpjz Ih D Iofx Al Segh Nidro cars Holland is located in the centre of the country and is the right place to buy your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: FIND OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: used, Year of construction: 1992, Used Machine Year of Manufacture: 1992 Features and Technical Specifications: - 4-sided planer with automatic positioning - 2 CNC axes - Max. planing width (finished dimension) 220 x 120 mm - Min. planing dimension 25 x 5 mm - Feed table length 2000 mm - Machine adjustment without opening the hood - Motors with direct start Fgjdpfx Ajzyy Ekjl Ssh - Feed/thickness planer spindle with digital numerical control - Left planer spindle with digital numerical control - Feed speeds 6–12 m/min. - With pre-planing cutter - Planer spindle diameter: 40 mm - Speed: 6000 rpm - Motorized feed rollers (top and bottom; smooth or rubber-coated) for the outfeed - Feed motor: 0.6–0.9 kW - Planer motor: 4 kW - Right planer shaft: 4 kW - Left planer shaft: 4 kW - Thicknesser shaft: 5.5 kW

Condition: used, Year of construction: 2020, FLIEGL SDS350 15 Meter X-TRA LONG STRAIGHT Container Chassis for 2 Swap Bodies or 2 Containers Fgodpfxewtbvte Al Ssh !EXTRA LONG! !! 14.85 m long!! • Mountings for 2 x 7.45 m swap bodies • or 2 x 20-foot containers • Straight chassis • 3 x SAF air-suspended 8-ton axles • Lift/lower system • ABS • ASR Vehicle dimensions and weights: • Gross weight: 35,000 kg • Unladen weight: 4,100 kg • Dimensions: 14,850 x 2,550 x 1,200 mm • Tyres: 385/55 R22.5 • Tread depth: 13/13/11/12/12/9 mm - Very good condition, hardly used! - Technical Inspection (TÜV / HU / SP): NEW! - SP: 01/26 - German semi-trailer! - 1st owner Errors and prior sale reserved! = More information = Year of manufacture: 2020 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 35,000 h, pressing force: 170 t, stroke length: 445 mm, overall weight: 16,000 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, TRUMPF TruBend 5170 / 4m bending length Fgjdpfx Aozrnpujl Seh Year of manufacture: 2/2014 Press force: 1700 kN (170 tons), bending length: 4,080 mm Machine operating time: 35,000 hours, hydraulic operating time: 25,000 hours Control system: TASC 6000 Configuration: 1 active bending assistant, 2 support consoles 4-axis backgauge CNC-controlled crowning Hydraulic upper tool clamping Hydraulic lower tool clamping I-axis BendGuard Last inspected and measured by Trumpf 6/2026

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 Fedpfx Alozxbk Eo Sjgh DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 05/2009, loading space length: 11,410 mm, loading space width: 2,420 mm, loading space height: 2,720 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,610 mm, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles Fodpfxszubt Ej Al Ssgh = More information = Make axles: BPW Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Empty weight: 7.360 kg Carrying capacity: 25.640 kg GVW: 33.000 kg Tail lift: D`Hollandia, slider lift Registration number: OK-83-VK

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Fliegl 45 ft Container Chassis Tailor-Made Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example. Production and equipment are customized to customer specifications. Chassis High-strength fine-grain steel welded chassis Fifth wheel with replaceable 2" kingpin and two kingpin positions Container locking system for: Rear extension retracted: 1 × 20 ft container (flush with rear, reduced kingpin load) Rear extension – Position 1: 1 × 30 ft, 2 × 20 ft, or 1 × 40 ft container with gooseneck tunnel Rear extension – Position 2: 1 × 45 ft container with gooseneck tunnel and rear overhang No rear height adjustment and no folding center supports; containers without a gooseneck tunnel cannot be transported Front locking adapter for securing containers without a tunnel from below, including storage bracket Roller-mounted rear extension with manual crank 24 t two-speed landing gear, single-side operation Two wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45 ft containers Half-shell mudguards EC-compliant anti-spray mud flaps Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-aligned axle and suspension system for reduced tire wear and lower fuel consumption Offset axle spacing for combined transport (GCW up to 44 t) Air suspension Automatic lift axle on the 1st axle with forced lowering and traction aid (activated by braking three times). Traction aid operates up to 30% axle overload and a maximum speed of 25 km/h. Braking System Dual-line pneumatic braking system Color-coded air lines for easier servicing Spring parking brake Two interchangeable coupling heads at the front (without connecting hoses) Electronic Braking System (EBS) with front EBS socket (without connecting cable) Trailer may only be operated with towing vehicles supporting ABS functionality Raise & lower valve Vehicle Stability System (RSS) Axle load monitoring via EBS CAN bus for display in the truck cab (truck preparation required; not a calibrated weighing system) Wheels & Tires 385/55 R22.5 tires, manufacturer's choice Steel wheels, factory silver Fjdpfxozlkiwj Al Sjgh Electrical System 24 V electrical system Multi-chamber lights with LED tail and brake lights Yellow LED side marker lights (On certain tractor units, diagnostic messages may occur although all lighting functions correctly.) Two white front position lights Two red/white rear outline marker lights Two 7-pin front sockets (without connecting cables) Operating Information When transporting a 45 ft container with a short tunnel, with or without the front extension, the maximum permitted kingpin-to-rear-end dimension and the legal overall vehicle combination length of 16,500 mm are exceeded. The rear underrun protection must be extended manually. A special permit in accordance with §70 StVZO is required. Registration & Approval Registration country: Germany DEKRA approval and inspection certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder ECE R48 contour markings (white on the sides, red at the rear) Finish Hot-dip galvanized chassis including passivation 15-year anti-corrosion warranty Landing legs with black coating