Used Fliegl Tlk 118 for sale (691)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 1,188 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, suspension: parabolic leaf (spring), tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gearbox support leg at the front 2 support wedges with holder Underrun protection, steel Lockable storage compartment for ramps under the loading area Coupling device for center axle trailer Drawbar with tested 40 mm tow hitch Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (lever equalization) Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system, color-coded lines for easy servicing Hand-operated parking brake Integral air reservoir Without ABS, but with mechanical ALB, then max. 60 km/h approval 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Electrical System 12 Volt, multi-chamber lights, without yellow LED lighting on the sides, reflectors on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 x 7-pole 12 Volt plug at the front, with connecting cable, extended by approx. 60 cm Hydraulics Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck. Knsdpfx Asi Rizbebvsc Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operation hydraulically via truck PTO Tipping Bridge Sturdy tipping bridge with 4 mm steel sheet floor, side wall construction steel, side walls continuous, foldable and suspended with central locking at the bottom. Rear uprights can be inserted. Rear wall foldable and suspended, with central locking at the bottom. Bed length approx. 4,500 mm, side walls with 5 hinges at the bottom. Bed width 2420 mm 5 pairs of lashing eyes in the floor, each 5 tons Operating Instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Approval Country / Signage Approval country: Germany With Dekra approval and certificate, for max. 60 km/h approval, towing vehicle LoF (approval country Switzerland max. 40 km/h possible) Prepared for single-row license plate holder Without contour marking / reflective stripes according to ECE R 048 Painting Frame hot-dip galvanized incl. passivation, 15-year warranty against rust Side walls / bridge RAL 3002 carmine red Note! If the bridge is galvanized, it will not be painted! Note! Bridge is only primed inside! Wide tires also possible at an extra cost. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive images!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21201011210, empty load weight: 3,420 kg, maximum load weight: 8,380 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 60 %, Year of construction: 2021, Please note: the images are archive photos. The vehicle may currently be in use! # Chassis – centre-axle trailer - Fine-grain steel welded construction, "10-year warranty against rust-through" - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Gear-driven landing leg at front, folding rear support, side door stays - Steel rear underrun protection, rear corner impact protection - 1 spare wheel carrier for 1 spare wheel, with wheel fixing kit - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) - Without ramps - Platform height 1080 mm – observe overall height! # Towing device – centre-axle trailer - Drawbar with certified 40 mm towing eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - No drawbar length adjustment # Axles + suspension - BPW drum brake axles, air suspension Kedez R Afyopfx Abvsnc - Axles/running gear laser-aligned – reduces tyre wear and fuel consumption # Braking system - Dual-line compressed-air braking system, colour-coded lines for easy servicing - Spring-brake parking brake - Duomatic connection at front, with connecting line to towing vehicle - EBS with EBS connector at front, with connecting cable - Caution: the trailer may only be towed by vehicles ensuring the effectiveness of the ABS! - Raise/lower valve, vehicle stability system # Wheels and tyres - 235/75 R17.5, make at manufacturer's discretion, steel rims factory silver # Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lamps, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front, with connecting cable # Floor - Film-faced plywood approx. 30 mm, for high point loads - Floor rated for forklift loads up to 2900 kg - Platform length approx. 7300 mm # Front wall / front corner posts - Through-loading system with front portal doors, double-leaf, each with 2 internal cam-bar locks - Steel corner posts, release device for side curtain - Bridge plate approx. 2400 mm wide, divided once, approx. 350 mm long to rest on tail lift, capacity approx. 1800 kg, incl. tail lift support - (Drawbar length then approx. 2100 mm; for 1800 mm tail lift, truck coupling set-back min. 20 to max. 240 mm) # Centre stanchions - 1 pair of sliding stanchions, movable over full length, with fourfold slat pockets and long pocket at bottom - 1 pair of fixed stanchion positions # Insert slats - 5 rows of aluminium V-slats # Rear wall / rear corner posts - Steel rear corner posts up to roof underside - Curtain attachment with round tube, curtain tensioning ratchet - Rear portal doors, double-leaf, each with 2 internal cam-bar locks # Curtain - Welded-in horizontal and vertical straps, stainless steel tensioning buckles # Roof - Sliding roof, slides from rear to front - Rear end carriage folds upwards - Curtain colour: white - Optimised rain gutter at rear, on top of rear bow above doors # Country of registration / plates - Germany, with DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL - Prepared for single-line number plate holder - White reflective strips: along bottom of side curtains and at top corners - Red reflective strips: around rear portal

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, next inspection (TÜV): 10/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Knjdpfjk E Tdaex Abvec Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: new, empty load weight: 2,810 kg, maximum load weight: 8,990 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,500 mm, total length: 8,120 mm, suspension: other, color: grey, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - FLIEGL Tandem platform trailer TPS 118 with angled rear and ramps - New vehicle, delivery time upon request - Price: 21,900 EUR plus VAT - Fine-grained steel welded construction, hot-dip galvanized - 6 pairs of lashing eyes in the floor, each rated at 5 tons - Storage box - BPW drum brake axles - Parabolic suspension with maintenance-free steel/rubber/bearing system - 235/75R17.5 tires - Permissible total weight: 11,800 kg, unladen weight: 2,810 kg - Payload: 8,990 kg - Overall length: 8,080 mm, overall width: 2,550 mm - Internal platform dimensions: L 6,200 x W 2,550 - Loading height: 910 mm - Coupling height: 700 to 950 mm - Steel corrugated floor, hot-dip galvanized - Rear angle of approx. 900 mm - Aluminum front and side panels, 400 mm high - Center and corner posts removable - Steel ramps with wooden covering, L 2,300 x 510 mm, laterally adjustable - Gas spring supports for single-person operation - Reflective strips according to ECE R048, white on the sides, red at the rear - Axle and frame painted in DB7350 Novagrau - 10-year warranty against rust - Errors and prior sales excepted! - More information and additional photos on our website: Kodpfozv Nrfsx Abvsnc ... VAT can be shown, ABS, new, HSN 7951, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban)

Condition: new, empty load weight: 3,020 kg, maximum load weight: 8,640 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,950 mm, suspension: other, color: white, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - Fliegl three-sided tipping trailer, type TSK 118, new vehicle, delivery time on request - Aluminum ramps optional, 1,800 EUR net - Price with ramps: 22,700 EUR plus VAT - Factory new - Frame hot-dip galvanized - Permissible total weight: 11,800 kg - Unladen weight: 3,160 kg - Payload: 8,640 kg - Overall length: 6,950 mm - Overall width: 2,550 mm - Platform dimensions: L 5,000 mm, W 2,420 mm, loading height: 950 mm - Steel welded construction - Support leg at the front - Folding rear support (aluminum ramps optional, 1,800 EUR net) - Underrun protection, steel - Continuous mud flaps at the rear - Lockable storage compartment for loading ramps below the loading platform - Towing eye, 40 mm - Drawbar, height-adjustable - BPW axles - "Chassis laser-aligned" to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization - 235/75R17.5 tires - 2-line pneumatic braking system, manual parking brake - ABS and ALB - Stable tipping platform with 4 mm steel sheet floor - Side walls foldable and pivoting with central locking - Corner posts at the rear, plug-in type - Rear wall foldable and supported with central locking - 5 pairs of lashing points in the floor, each 5 tons - Contour marking with reflective strips - Frame hot-dip galvanized, 15-year warranty against rust - Platform color: RAL 9010 pure white - Errors and prior sale excepted! - More information, additional XXL pictures, directions, can be found on our website at: ... VAT can be shown, ABS, new, very good condition, HSN 7951, TSN 000, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Knjdpjzv Nrlofx Abvjc

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Kedpfey Rxmwox Abvonc Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake Knjdpfxezcv Sts Abvjc 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: used, axle configuration: 3 axles, first registration: 07/2005, color: other, Year of construction: 2005 Empty weight: 4.200 kg Axle 1: left 4-8 mm right 10-10 mm Axle 2: left 10-10 mm right 12-12 mm Axle 3: left 4-8 mm right 4-4 mm Knedpjzxz Iwofx Abvjc We have the possibility to stack trailers!

Condition: used, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 10/2009, loading space length: 6,200 mm, loading space width: 2,440 mm, loading space height: 3,000 mm, suspension: air, tire size: 235/75R17,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, with tarpaulin and side rails, 2 axles, tandem axle, air suspension, lifting and lowering mechanism, ABS (anti-lock braking system), Edscha, lashing eyes, side protection, front support, rear support, adjustable drawbar. Superstructure: Flatbed + tarpaulin trailer for glass transport with Edscha cover. Tires approximately 50% remaining. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale and errors. Kodpsi Rpx Njfx Abvjnc

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,900 kg, maximum load weight: 8,900 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,000 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center-axle trailer Fine-grained steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for tie-down straps 3 pairs of lashing eyes outside in the floor, each 5 tons 1 at the front in the corners, 1 in front of and 1 in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5 tons Gearbox support leg at the front Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection, galvanized Splash guards at the rear covering the entire width (not in combination with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Coupling device: Center-axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking System 2-line compressed air brake system Color-coded line routing for easy servicing Hand-spindle parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 volt ABS and ALB, with ABS connector at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and Tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front, in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Floor Steel/diamond plate floor for high point load capacity Note: Slight floor waviness due to welding distortion is possible! Platform length approx. 6,200 mm Rear incline to approx. 900 mm Front wall / corner posts at the front 25 mm aluminum hollow profile, 400 mm high Side walls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / corner posts at the rear 1 pair of steel uprights attached to the frame, with brackets for locking the access ramps, access width approx. 2,430 mm Access Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally movable With handrail on the ramps Covered with wood (tip area with steel/diamond plate) With gas spring for one-person operation Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and following behavior possible due to incorrect load distribution) Country of Registration / Signs Germany Knodpszcqpasfx Abvoc With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rusting" Front wall Aluminum Side wall Aluminum, anodized Access ramps Hot-dip galvanized Customized Transport Solution

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21201012165, empty load weight: 2,290 kg, maximum load weight: 9,510 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 910 mm, total length: 7,000 mm, total width: 2,550 mm, total height: 910 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Equipment: ABS, - Please note: stock photos! #Chassis – Centre-axle Trailer Knsdez Akl Tepfx Abvec - Fine-grain steel welded construction - 6 pairs of lashing rings, bolted externally into the floor/outer frame, 5 t each - 2 additional pairs of lashing rings bolted into the floor at the corners, 5 t each - Geared landing leg, front - Folding rear support - 2 wheel chocks with holder - Galvanised steel underrun protection - Rear mudflap, full width (not compatible with forklift pocket mounting) - Quarter-shell mudguards - 1 plastic toolbox with removable tray, W=620/H=360/D=440 mm, lockable with a padlock (lock not included) - 1 row of lashing/stake rails recessed centrally along the floor (from the end of the front cross-member to the start of the rear cross-member), approx. 100 mm high, with 20 mm round steel bars top and bottom, approx. 60 mm apart, closed at the bottom with an angle plate, open on the lower half; for lashing and inserting 80 x 80 mm stakes - Hook-in rail for aluminium ramps at the rear - 1 storage compartment for loading ramps, for ramps 3000 x 360 mm - Centre-axle trailer coupling gear - Drawbar with approved 40 mm towing eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles + Suspension - BPW drum-brake axles, axle spacing approx. 990 mm - Laser-measured axle/chassis alignment – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensation) #Wheels and Tyres - 235/75 R 17.5" - manufacturer's choice - Steel wheels, factory silver #Braking System - 2-line air braking system - Spring-loaded parking brake - Integral air reservoir - 2 mismatch-proof coupling heads at the front, with connecting lines to the towing vehicle - ABS and ALB, with ABS connector at the front, with connecting cable #Electrics - 24 volt, multi-chamber lights, yellow LED side marker lights - 2 white front position lights - 2 white/red outline marker lights at the rear - 1 x 15-pin connector at the front, with connecting cable #Floor - Steel/chequer-plate floor for high point-load capacity - Film-faced plywood panels, approx. 30 mm thick, for high point-load capacity, bolted-on version - Note: slight floor undulation possible due to weld distortion - Bed length approx. 5,200 mm #Country of Registration/Plates - Country of registration: Germany - with DEKRA inspection and certification (in accordance with §13 EC-FGV) - Down-rated to a permissible gross weight of 9,900 kg – exempts from the six-monthly safety inspection (SP), with correspondingly reduced payload - 24/7 service hotline - prepared for a single-row number plate holder - Contour marking with reflective tape to ECE R048, white on the sides and red at the rear #Paint Finish - Frame hot-dip galvanised incl. passivation, 15-year warranty against corrosion perforation - Note: floor undulation possible due to hot-dip galvanising - Please note: stock photos!

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011 Empty weight: 5.100 kg Axle 1: left 8 mm right 8 mm Kjdpszp Hc Isfx Abvsnc Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2007, total length: 12,080 mm, total width: 2,500 mm, wheelbase: 9,600 mm, color: silver, Equipment: ABS, General information Year of construction: 2007 Registration number: OK-65-YT Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.360 kg Carrying capacity: 33.640 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Additional information Kjdj Aa A Ncopfx Abvjnc Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - Extandable - Twist-locks = Remarks = Fliegl SDS 390 / 40-45FT / 1x Extendable / BPW + Disc

Condition: used, axle configuration: 3 axles, first registration: 07/2013, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Equipment: ABS, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes Knjdpfx Abezvdp Ssvoc = More information = Year of construction: 2013 Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Brakes: disc brakes Suspension: air suspension

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 12/2016, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, total length: 9,000 mm, total width: 2,480 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 6,750 mm, General information Model year: 2026 Axle configuration Tyre size: 385 / 55 / R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Middle axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Middle axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 3.150 kg Carrying capacity: 14.850 kg GVW: 18.000 kg Functional Make of bodywork: Booi Carrosserie Plywood BDF Box Knedpfez R Nb Aex Abvec History Number of owners: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202019236, empty load weight: 5,675 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: yellow, Year of construction: 2016, Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin - Slightly inclined outer frame with "Load-Lock-Profil" for securing straps - Note: When securing straps in conjunction with side boards, the side boards must be opened! - Single-side operation of landing legs, straight lower section, without thrust compensation - Side-mounted door retainers, aluminium side underrun protection, galvanised steel rear underrun protection - Heavy-duty pallet stop on both sides, approx. 20–25 mm high, lashing points every 200 mm; loading height reduced by approx. 20–25 mm - Spare wheel, same make as standard tyres - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) # Axles and suspension - BPW disc-brake axles - Air suspension # Braking system - Dual-line compressed-air braking system - Spring-loaded parking brake - 2 misconnection-proof coupling heads at the front, without connecting lines - EBS electronic braking system with front EBS socket, without connecting cable - Warning: This trailer may only be towed by tractor units that ensure the effective operation of the ABS! - With raise/lower valve - Vehicle driving stability system # Wheels and tyres - 435/50 R19.5", make at manufacturer's discretion # Electrical system - 24 V, multi-chamber lights, yellow LED side lighting - Yellow LED side lighting with 20 LEDs per lamp - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, without connecting cable Kedpfx Abs Aay Sbevjnc - LED safety light, mounted at the top of the rear corner posts - Approx. 30 mm thick screen-printed floor panels, cross joints with Omega inserts, on longitudinal bearers for high point loads; maximum forklift axle load 7,100 kg # Front bulkhead / corner posts - 2,580 mm high, steel corner posts in high-volume design # Centre posts - Pair of sliding posts, movable along the full length, with four-way sockets and a long lower socket - Pair of post positions # Insert boards - 4 rows of aluminium V-shaped insert boards # Rear wall / corner posts # Curtain - Curtain with welded-in horizontal and vertical tensioning straps # Roof - Sliding roof, rear end lift-up section; roof can be slid from rear to front; L-shaped roof rail for the automotive industry; internal width between roof rails approx. 2,490 mm; curtain colour: white - EcoLift lifting roof, raises by approx. 380 mm, assisted by gas struts - Front with 2 driving positions: - Front internal height approx. 2,900 mm / 3,000 mm # Operating instructions - If the overall height exceeds 4,000 mm, please note the following: - The transport operator is solely liable for any resulting damage. - The driver transporting the vehicle must obtain a permit under Section 29 of the German Road Traffic Regulations (StVO). - We accept no liability for transporting the vehicles. - Note: The specified gross weight is technically possible; depending on the load, it may not be achievable while complying with the permitted axle and fifth-wheel loads. # Registration / plates - Germany - With DEKRA inspection and report - Load securing certificate to EN 12642 XL (valid only in conjunction with 4 rows of aluminium boards) - Additional DC 9.5 certificate, pallet stops on both sides, approx. 25 mm high; loading height reduced by approx. 25 mm; warning panel to ECE Regulation 70

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,135 kg, maximum load weight: 8,665 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,350 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Fine-grained steel welded construction Outer frame slightly inclined with "Load-Lock profile" for attaching lashing straps Gearbox support at the front Foldable rear support 2 wedge blocks with holder Underrun protection, steel, galvanized Splash guards at the rear, covering the entire width Partial wheel arches according to EC standards with anti-spray splash guards according to EC standards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Storage compartment for inserting bars, open, below the loading area 4 lashing/rail strips inserted crosswise in the floor, across the entire width up to the outer frame (max. usable internal width between the outer rail supports approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips at the top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a finish, open halfway down. For lashing and inserting 80 x 80 mm rails. 4 pairs of rail pockets inserted in the outer frame, internal dimension 83 x 83 mm 4 rail pockets inserted centrally in the floor, with reinforcements to the main frame, internal dimension 83 x 83 mm 6 pairs of insertion rails B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Rail pockets/insertion bars are not designed for the sole securing of long materials, pipes, etc. without wrapping. Side impact protection, aluminum Coupling device for tandem trailer Drawbar with tested 40 mm towing eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm Axles + Suspension Axles according to the manufacturer's choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Wheels and tires 235 / 75 R 17.5", according to the manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air brake system Knjdpfsi Ri H Dsx Abvec Spring-loaded parking brake Integral air tank 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connection cable Floor Sieve print plates approx. 30 mm thick, for high point load capacity Note: Floor deformation due to weather influences possible! Platform length approx. 6,200 mm Operating instructions Special permit required if the overall train length exceeds 18,750 mm. Observe country-specific registration regulations. Approval / Signs Registration country: Germany with DEKRA inspection and certificate Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized incl. passivation "15-year warranty against rust-through" Customized transport solution

Condition: used, axle configuration: 3 axles, first registration: 07/2013, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes Kjdpfxjz Sz Ebo Abvjnc = More information = Year of construction: 2013 Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 30% Rear axle 2: Tyre profile: 40% Rear axle 3: Tyre profile: 40%

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 12/2016, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, total length: 9,000 mm, total width: 2,480 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 6,890 mm, General information Model year: 2026 Axle configuration Tyre size: 385 / 55 / R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Middle axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Middle axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 3.750 kg Carrying capacity: 14.250 kg GVW: 18.000 kg Functional Make of bodywork: Booi Carrosserie Plywood BDF Box Knodszv I Aiepfx Abvoc History Number of owners: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = General information Year of construction: 2014 Registration number: ON-68-FS Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Knsdpfx Abez Sna Ievjc Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027

Condition: used, maximum load weight: 28,745 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2021, Equipment: ABS,

Condition: used, maximum load weight: 28,745 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2021, Equipment: ABS,

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202020752, empty load weight: 5,545 kg, maximum load weight: 26,455 kg, overall weight: 32,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 435/50R19,5*, tire condition: 56 %, color: yellow, Fine-grain steel welded frame; fifth-wheel plate with replaceable 2" kingpin Slightly angled outer frame with "Load-Lock-Profil" for lashing straps. Note: open sideboards to attach straps. 24 t two-speed landing gear, single-side operation, semicircular base, straight mounting plate, push compensation Without support legs Rear ladder Side door retainer Galvanised steel rear underrun guard Quarter mudguards; separate rear corner impact guard Heavy-duty pallet stop both sides, approx. 20–25 mm high; lashing points every 200 mm; loading height reduced by approx. 20–25 mm Plastic toolbox with drawer and shelf, padlockable (padlock not supplied) # Axles and suspension BPW drum brakes Axle spacing 1810 mm; technical axle load 10 t Air suspension Without lift axle # Braking system Dual-line compressed-air brakes Spring-operated parking brake 2 non-interchangeable coupling heads at front EBS with front socket, without connecting cable Warning: tow only with tractor units ensuring ABS effectiveness! Raise/lower valve Trailer electronic stability system # Wheels and tyres 435/50 R19.5" Steel rims # Electrical system 24 V, multi-chamber lights, yellow side LEDs Number plate lights both sides 2 white front position lights 2 white/red rear outline marker lights Front: 2 x 7-pin and 1 x 15-pin non-interchangeable sockets; no connecting cable # Floor Approx. 30 mm anti-slip panels, transverse joints with omega inserts, on longitudinal bearers; forklift axle load up to 7100 kg 2580 mm steel high-volume corner posts; side-curtain release on headboard Removable centre posts 3 pairs of sliding posts along full length, four-way sockets and long lower pocket 3 pairs of post positions # Insertion boards 4 rows of aluminium V-shaped boards # Rear wall / corner posts Steel rear corner posts to roof underside; two-leaf rear portal doors, each with 2 internal locking rods # Curtain Curtain with welded horizontal and vertical straps # Roof Sliding roof, rear end lifts; slides rear to front; L-shaped roof rail for car transport; internal width between rails approx. 2490 mm; white curtain EcoLift lifting roof, raises approx. 380 mm on both sides, gas-strut assisted; 3 front driving positions: internal height approx. 2900/2950/3000 mm; set to 2900 mm # Registration / signs Germany EN 12642 XL load-securing certificate (valid only with 4 rows of aluminium boards) Additional DC 9.5 certificate; pallet stop both sides, approx. 25 mm high; loading height reduced by approx. 25 mm Yellow reflective strips continuously along bottom of side curtains Red reflective strips around rear portal Kjdpo Aaznkjfx Abvsnc Archive images! Vehicle may still be in use!

Condition: used, maximum load weight: 14,310 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2013, next inspection (TÜV): 01/2027, loading space length: 6,934 mm, loading space width: 2,486 mm, loading space height: 800 mm, total length: 8,750 mm, total width: 2,550 mm, total height: 2,600 mm, Equipment: ABS, * Wooden floor with rail system * Folding side walls * Fixed front wall * Air suspension * Storage boxes Kedeztihujpfx Abvsnc * SAF axles with drum brakes * Wabco Trailer EBS-E -----* Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg * Tare weight: 3,690 kg * Overall length: 8,900 * Next inspection due: 07/2026 ----Vehicle number/Vehicle: 12370----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, salvage and vehicle transport.----?YOUR VTS TEAM

Condition: used, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, first registration: 09/2013, loading space length: 7,400 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, loading space volume: 18 m³, suspension: air, wheelbase: 6,150 mm, color: blue, Year of construction: 2013, gearing type: other, front tire size: 385/65 R22,5, rear tire size: 385/65 R22,5, driver cabin: other, Equipment: ABS, * German trailer * First owner * Condition, see photos * Loading area dimensions: Length 7,400 mm x Width 2,500 mm x Height 1,000 mm * Wooden loading floor with lashing rails * DIN lashing eyes * Aluminum loading flaps * Center posts * SAF axles * Longitudinally adjustable drawbar * Air suspension * ABS + EBS * Anti-lock Braking System / Automatic Load Balancing * Wheelbase 6,150 mm * Gross vehicle weight (GVW) 18,000 kg * Tare weight 3,500 kg * Payload 14,500 kg If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection, a new DGUV certificate, a new SP certificate, or a new UVV certificate. Knsdpfxsz Sdu Ho Abvjc You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false impressions about the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.