Used Gannomat Concept 70 Easy for sale (17,989)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Lodpsw Sgnksfx Anxeag - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Lodpoiidm Njfx Anxjag Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Ledpfxey Egz So Anxeag Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components Lsdpfx Aevxgrrsnxoag • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening Ljdpfsdx Daaex Anxjag

Condition: good (used), Year of construction: 2005, Length: 2300 mm, unlimited as it is open on the sides. 4 stations for drilling, inserting dowels, and applying adhesive. Equipped with a new adhesive nozzle. Ljdpfx Aozzrdzjnxoag

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Lajdpfszhhl Ijx Anxsg Half-turn staircase, left + right. A complete staircase can be stored on a Euro pallet.

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Lasdexnlflspfx Anxsg

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Ledjzk H A Dopfx Anxsag Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Year of construction: 2025, condition: new, New machine Laodpfow Nafksx Anxeg Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2004, Used Machine Year of Manufacture: 2004 Features and Technical Specifications: Travel Ranges: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - HSK 63 F tool holder - Speed: 1,000–18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: Ljdezk Nmfspfx Anxjag - 9 vertical drilling spindles spaced at 32 mm intervals - Horizontal drilling spindle: 1 1 - Vertical drilling spindle: 1 1 Groove saw: in the X direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: upon request Location: Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Vacuum pump 100 m³/h Including vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach Ljdpfszk Nu Njx Anxeag

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Ljdpfx Aodx R Dtonxjag Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences Ljdpfxodx R Dmj Anxeag

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Laedpeb Eln Djfx Anxeg Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Lsdsw I Ug Hepfx Anxeag Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale is a high-quality dowel drilling machine, a GANNOMAT OPTIMA 21, Type 510, manufactured in 1999. The machine operates cleanly and precisely and is perfectly suited for dowel joints, hole patterns, and carcass processing. Technical data: +Manufacturer: GANNOMAT / Ganner +Model: OPTIMA 21 +Type: 510 +Year of manufacture: 1999 +21 drilling spindles +32-mm system +Drilling width: approx. 640 mm +Pneumatic workpiece clamping +Horizontal and vertical drilling possible +Foot pedal operation +Spindle speed: approx. 2,800 rpm +Motor power: approx. 1.5 kW +Connection: 400 Volt high voltage +Compressed air connection required +Robust industrial design +Weight: approx. 400 kg Condition / Equipment: +Fully functional +Well-maintained condition +Ready for immediate use +Heavy-duty professional design +Precise stops and easy operation Perfectly suited for: -Furniture manufacturing -Kitchen manufacturing -Interior design -Carcass production -Series drilling -Dowel joints Price: €2,950 net Lodpfx Ajy Szhyjnxeag Inspection and test run possible at any time by arrangement. Loading can be assisted, or shipping via a freight forwarder is possible. You will receive an invoice with VAT shown.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Lasdpfxsxwaz Ho Anxeg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Ljdpfxjyi U Ugj Anxjag Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Lasdpjxdttisfx Anxsg Availability: Short-term – immediately –

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz Ljdpfx Ajzu A D Eonxeag 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X Lsdpfx Ajzgfwlenxsag - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Laodpfx Anoz Dt Hyexsg Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2026 Dowel insertion machine with a pistol grip for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. • Consistent dowel insertion depth • Always consistent and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easiest cleaning of the gluing system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by the Auto-DL selector • Dowels are not driven in based on force; the dowel insertion depth is set independently of the bore hole depth Lajdpfx Ansvxgm Nsxog • Recoil-free, extremely lightweight, and comfortable glue-dowel insertion pistol • Significant time savings compared to using a glue bottle and hammer

Condition: used, Year of construction: 2019, Machine design: Throughfeed/Return feed Working area in X-direction: 1300 mm Working area in Y-direction: 5600 mm Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 5.5 kW Main spindle speed: 1000-20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change stations: 3 Back wall grooving units: fixed in Y-direction Vertical drilling spindles - in X-direction: 3 Vertical drilling spindles - in Y-direction: 10 Horizontal drilling spindle in X-direction: 2 Horizontal drilling spindle in Y-direction: 6 Control system: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Ljdpfsymp N Tex Anxsag Programming system: Gannomat Editor DXF interface: Yes Online connection possible: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 hours Weight approx.: 1800 kg Extraction diameter: 3x80 mm Machine was modernized in the factory; pressure bar and control technology from model 0572! Storage location: Customer