Used Ger Rs-50/25 for sale (51,675)

Condition: used, Year of construction: 1984, Technical details: Gkodpfx Alsu Ngkye Ssc grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: used, surface grinding machine Gkjdpfez Dubrox Al Sec

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes Gjdpfoz Rnrrsx Al Sekc X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Gjdpfx Alefkg H Te Sskc Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Year of construction: 1988, condition: used, functionality: fully functional, PAAL RS 40/250 paper roll saw, Manufactured by Paal’s Packpressen-Fabrik in Germany. The machine is designed for cutting paper rolls and is suitable for industrial paper processing applications. Gkjdpfxoxu A U De Al Sjc Technical specifications: Manufacturer: Paal’s Packpressen-Fabrik Model / Type: RS 40/250 Year of manufacture: 1988 Machine number: 24458 Motor power: 17 kW Rated current: 34 A Voltage: 380 V Frequency: 50 Hz Weight: 2,350 kg Condition: Used Price: €7,000 The machine is available for inspection. Category: Paper, cardboard & foil processing machinery → Cutting machinery Keywords: PAAL RS 40/250, paper roll saw, paper roll cutting machine, roll cutting machine, paper processing machinery, Paal’s Packpressen-Fabrik, paper rolls.

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Godpfxszg Nbhj Al Sskc Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR Gkodpfjy Du N Uex Al Ssc TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: good (used), Year of construction: 2009, Multrip saw for grooving foam/plywood/MDF/composite Maximum working width : 2500 mm Maximum cutting hight : 50 mm Infeed conveyer table with adjusteble speed Gedpfxsz Ii N Eo Al Sskc Has been used for cutting tracks in foam, for the inner core in windmill wings ( so the foam can bend in any angle ) Can be used to cut tracks/grooves in plywood/MDF/composite/simillar.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Godpozgcy Dsfx Al Sjkc Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Gksdpfozw D I Rox Al Sjc Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: like new (used), Year of construction: 2001, CNC rotary table for Mazak machines. Manufacturer: Kitagawa, model RS 20. Godpszumu Ijfx Al Sjkc

Condition: ready for operation (used), Berger Lahr VRDM 397/50 LWC SIG Positec 52525035600 stepper motor, serial number: 9735750 with encoder, used, in good condition, 100% functional, delivery as per photos. Gsdjw Ikbmopfx Al Sekc

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes Gsdpfeznu Agjx Al Sekc -Type: Size 50/25 mm -Submission/Price: complete -Dimensions: 135/65/H65 mm -Weight: 0.6 kg/pc.

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: Gkedexcybkjpfx Al Sec - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm X-axis travel 1550 mm Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Gkedpfxovli H Sj Al Ssc Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Gkedozfp Hhjpfx Al Ssc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3 AX, working width: 2,500 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, control voltage: 380 V, oil tank capacity: 70 l, overall weight: 5,000 kg, total length: 2,800 mm, total width: 1,800 mm, total height: 2,200 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, finger protection, type plate available, Press brake SCHIAVI - AMADA RG 50-25 Press force 50 tons Table length 2550 mm Gkjdpfx Aoygu Alol Sec MASTER TASK 3-axis CNC control Complete with upper and lower dies Fully functional and connected for tests and video

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering a very well-maintained DURST P5 250 WT digital printing machine, manufactured in 2022, for sale. Manufacturer: DURST Model: DURST P5 250 WT Year of manufacture: 2022 Condition: Very good Machine type: Industrial multi-pass digital printing machine Gksdpfszwdibox Al Sec Description: The DURST P5 250 WT represents a new generation of digital printing machines, equipped with Durst Water Technology. This system enables printing with low-odor or odorless water-based inks and is ideally suited for the production of packaging and displays made of corrugated cardboard. Durst WT inks do not contain any substances that are hazardous to health and meet the stringent requirements for occupational safety. The system is equipped with recirculating Durst Quadro Array print heads and WT inks. The additional ink recirculation behind the nozzle plate of the print head ensures high availability and reliability. Technical data: Material: A wide range of uncoated and coated corrugated cardboard qualities Sheet size: min. A3 (297 × 420 mm) to max. 2,500 × 3,200 mm Resolution: 1,000 dpi Maximum speed: 345 m²/h Average speed: 200 m²/h Average output at 2,440 × 1,220 mm: approx. 67 sheets/h Print heads: Durst Quadro Array Ink system: Durst Water Technology Printing inks: 6 colors Scope of delivery: DURST P5 250 WT digital printing machine Feeder Stacker Registration table Transport pallet Further information: Very little use No backlog of maintenance due to current service contract Transport pallet available For more information and technical details, please do not hesitate to contact us. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, BOEHRINGER NV 250 CNC vertical turning lathe For sale is a BOEHRINGER NV 250 CNC vertical turning lathe, manufactured in 2005. The machine is ideally suited for automated series production of turned parts. The pick-up spindle and the existing workpiece feeder enable automatic loading and unloading. Technical data: Manufacturer: BOEHRINGER Type: NV 250 Year of manufacture: 2005 Spindle head: A6 Max. chuck diameter: 250 / 315 mm Spindle bore: 65 mm Gedpfx Aozkk Udjl Sskc X-axis: 760 mm Z-axis: 260 mm Y-axis optional: ±50 mm Max. spindle speed: 5,000 rpm Spindle power: 31 kW Max. torque: 350 Nm C-axis: available 12-position tool turret Tool holder: VDI 40 / DIN 69880 Rapid traverse X/Z: 120 / 40 m/min Machine weight: approx. 8,500 kg Connection: 400 V / 50 Hz / 3 AC Equipment: Pick-up spindle Automatic workpiece feeder C-axis 12-position turret VDI 40 tool holder Chip conveyor Coolant system UNIFIL extraction system / filter system Documentation available Condition: Used Machine complete Inspection under power possible by arrangement

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine Gksdpjzkvucofx Al Soc -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,900 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, Equipment: hydraulically sliding cabin, pallet forks, sideshift, Load capacity 2,500 kg Linde H 25 Diesel Mast type: Triplex free lift Year of manufacture: 2017 Operating hours: 1,900 Lift height approx. 4,700 mm Overall height approx. 2,200 mm 3rd + 4th valve double auxiliary hydraulics Gkjdpfxoy N Rqfs Al Sjc Sideshift + fork positioner Gross €24,871 Net €20,900 Looking for a different forklift or high-lift truck? LPG, electric, diesel? Contact us and we will find the right vehicle for you. Subject to prior sale and errors. Sale to businesses only, no warranty.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, OPS Ingersoll Gantry Eagle 500 die-sinking EDM machine in very good condition. 3R clamping system Year of manufacture: 2017. Godpfx Ajx Htfysl Sokc Inspection under power possible.

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Model: V250 (Bofa) | WLA250 (Weidinger) Gkedpfx Ajxp H Ttel Sec Voltage: 230V (50Hz) | 1.1A Including power cable.

Condition: used, Surface grinding machine Brand: Ger Model: RS-75/35 3 automatic axes (X, Y, Z) Technical specifications Low column: - Maximum grinding area: 750x375mm (X, Y) - Table to grinding wheel center distance: 525mm - Table speed: 2 to 32m/min. - Maximum table travel: 800mm - Maximum workpiece weight: 500kg - Magnetic table: 700x250mm Cross travel: - Maximum cross travel: 350mm - Rapid cross feed: 1.5m/min. - Automatic cross feed: 2 to 60mm/rev. - Handwheel revolution: 3mm - Handwheel division: 0.02mm Vertical movement: Godpfx Alowx Nlmj Sokc - Rapid vertical feed: 200mm - Handwheel revolution: 0.24mm - Handwheel division: 0.002mm - Wheel dimensions: 300x50x76.2mm Motors: - Head: 6Hp - Pump: 3Hp - Feeds: 0.75HP - Total: 7.5KVA Weight: 3,700kg Dimensions: 2,400x1,850x2,300mm

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Gjdpfx Alsz Iqlbs Sskc Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request