Used Gmatick Gmbh Paternoster for sale (69,089)

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm Isdpfx Aeff Huwepnstg • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber Isdsff Agiopfx Apnstg The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Year of construction: 2025, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Itedpfx Aei E Hp Tepneg Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Itodpfxoy S Rw De Apnog Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Itodpfx Apjy S Rv Tonsg Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2014, condition: used, Industrial water treatment and distillation system for the treatment of industrial wastewater and process water, with integrated control, collection tanks, and a new pump following a recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of manufacture: approx. 2014 Operating manual available Control with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Inspection recently carried out Collection tank for industrial wastewater available Collection tank for distillate available Tank material: PP gray Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solution Isdoy S Rr Ujpfx Apnetg Tank volume, industrial wastewater: approx. 10,280 liters Tank volume, distillate: approx. 10,732 liters Tank volume, VacuCIP tank: approx. 1,306 liters Permissible operating temperature, tanks: 40 °C Permissible operating temperature, VacuCIP tank: 80 °C Specific weight, tanks: 10.00 kN/m³ Specific weight, VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Concentration: 1:10 Closed industrial design Pipeline and tank system made of stainless steel and plastic.

Condition: good (used), mileage: 148,321 km, power: 184 kW (250.17 HP), first registration: 10/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, fuel tank capacity: 300 l, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 10,000 mm, total width: 2,550 mm, total height: 3,750 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 8,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2023, Equipment: AdBlue, Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Maximum front axle load: 4,480 kg Maximum rear axle load: 8,480 kg Weights Unladen weight: 6,920 kg Payload: 5,070 kg Gross vehicle weight (GVW): 11,990 kg Functional Loading platform height: 300 cm Maintenance, History and Condition APK (General Technical Inspection): valid until 01/2027 Technical condition: good Visual condition: good Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for more information. = Company Information = Ijdpfsy Szlfex Apnjtg

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Itedewgc I Rspfx Apnog Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Iodpfx Ajwrn Iyspnstg Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 Itjdpfxofhgvwe Apnsg incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers Isdpoif Ek Refx Apnstg • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) Ijdpfefnlkwex Apnotg • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile Isdpfeywg Sbsx Apnetg - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 140 kg, total length: 900 mm, total width: 800 mm, total height: 2,000 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Itedpfx Asxuvk Espnog - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz Iodpoi Huzxefx Apnetg - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: used, Year of construction: 2021, machine/vehicle number: 7007490, Net weight: 14,300 kg, dimensions: length: 6.9 m, width: 2.5 m, height: 2.55 m, container size: 6.5 m, crusher number: 103334 Itedpfjy Rvlqox Apneg

Condition: used, Year of construction: 2018, machine/vehicle number: CS418-03-08, Own weight: 7,900 kg, connected load: 15 kW, container dimensions: length: 6.5 m, width: 2.3 m, height: 2.64 m Itodpfoy Rvmnox Apneg

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Iodpfjyb Hu Nex Apnstg Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation. Itsdpfx Apoyb I Azonsg

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Entry-level model panel bender bending center Itsdpfx Apoy H Huhonjg For detailed information and a personalized quote, please send us your inquiry. We will process it as quickly as possible and get in touch with you.

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as per photos Itjdoi D T Iyspfx Apnog

Condition: new, functionality: fully functional, power: 4.8 kW (6.53 HP), fuel type: gasoline, overall weight: 550 kg, maximum load weight: 500 kg, lifting height: 1,020 mm, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, tilting carriage, Mini Track Dumper HT500Y-4 Compact professional dumper with lifting function – now with a 10% promotional discount The Mini Track Dumper HT500Y-4 is the ideal solution for construction, gardening and landscaping, agriculture, and work in confined spaces. Thanks to its rubber tracks, hydraulic tipping mechanism, and powerful lifting function, the dumper is extremely off-road capable, stable, and easy to operate. The machine impresses with its compact design, high load capacity, and a reliable Briggs & Stratton gasoline engine. 🔥 PROMOTION: 10% DISCOUNT ON ALL TRACK DUMPERS Take advantage of our current sales promotion: 10% discount on all track dumper models – for a limited time only, while supplies last! The HT500Y-4 is ready for immediate use and offers a powerful combination of performance, maneuverability, and ease of operation. ⚙️ Technical Data Engine & Drive Engine: Briggs & Stratton Engine Type: 1-cylinder, OHV, 4-stroke, air-cooled Displacement: 203 cc Power: 6.5 HP at 3600 rpm Fuel: Gasoline Fuel Tank Capacity: 3.6 liters Performance & Capacity Maximum Payload: 500 kg Weight: 550 kg Skip Volume: 200 dm³ Tilting Angle: 100° Tilting System: Hydraulic Dimensions Machine Dimensions without Pedal & Skip: 1570 × 880 × 1450 mm Machine Dimensions with Foot Pedal & Skip: 2050 × 880 × 1450 mm Skip Dimensions: 1050 × 730 × 730 mm Track Width: 700 mm Lifting & Height Maximum Lifting Height: 1020 mm Maximum Tipping Height: 970 mm Tipping Distance: 220 mm Ground Clearance: 110 mm Undercarriage Track Width: 180 mm Track Contact Area: 1000 mm Track Gauge: 520 mm Turning Radius: 1150 mm Speed: 2.88 km/h Climbing Ability: 20° Rubber Tracks for Optimal Ground Grip ✅ Features & Benefits ✔ Removable protective container ✔ Simple control via operating lever ✔ Foldable standing platform for flexible work ✔ Very compact – ideal for tight construction sites ✔ High stability thanks to track undercarriage ✔ Low-maintenance gasoline engine ✔ Hydraulic tilting function ✔ Powerful lifting function for comfortable unloading Application Areas Construction & Renovation Gardening and Landscaping Agriculture Barn & Farm Work Material Transport on Difficult Terrain Work in Confined Spaces Condition & Delivery Iedpfx Apsyqxw Isnetg Available immediately New / unused, from current production Factory-tested, ready for immediate use Europe-wide delivery via freight forwarder possible 💶 SECURE PRICE ADVANTAGE Net list price: €3,800 Promotional price with 10% discount: €3,420 net plus VAT Save now – better price possible! Benefit from our attractive promotions. An inquiry is worthwhile! Location: Rheda-Wiedenbrück Inspection possible by appointment ➡️ Request now and secure a 10% promotional discount on track dumpers!

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Isdsyq Hgkspfx Apnstg Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: Iodpfx Aju Tha Iepnotg The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h Itodpfju Thh Eex Apneg bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.