Used Gosmeta Vh 2500-2 for sale (79,923)

Condition: used, Year of construction: 1988, sheet width 2500 mm Gjdpszxiauofx Aayobt plate thickness 3 mm weight of the machine ca. 1,7 t

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Gsdpsx Svm Rjfx Aayobt Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Godpfx Aaszy Hx Deyjbt Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. Gjdpfx Aaszd U D Neyjbt 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. Gbedpfx Aaszy N Nleyet - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available Gbsdpfxszw D Haj Aayet The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 67 rpm, Colchester Master 2500 40" between centres Spindle speeds 30-2500rpm Imperial dials 2 axis DRO Gsdpfx Aaezphivsyjbt Coolant pump and system Morse taper 3 tailstock Spindle bore 40mm Quick change tool post Comes with 4 jaw 10" 3 jaw with reverse jaws 8" 12" face plate Drive dog plate 4 x quick change tool holders

Condition: good (used), Year of construction: 1989, machine/vehicle number: 4113, functionality: fully functional, operating hours: 4,109 h, overall weight: 6,600 kg, Hydraulic press brake Gedszyanlopfx Aayebt Manufacturer: DoneWell, Hahn & Kolb Stuttgart Type: 80 - 2500 Year of manufacture: 1989 Control system: Cybelec Model Eva Pac Max. working width: 2500 mm Max. clamping force: 100 t Back gauge: 750 mm with 2 stop fingers Condition: good Die: Multi V 7 angle Tools

Condition: like new (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,000 h, input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, type of input current: DC, pressing force: 160 t, stroke length: 150 mm, operating speed: 50 mm/s, reverse speed: 10 mm/s, table width: 1,300 mm, table length: 2,500 mm, table height: 150 mm, throat depth: 1,300 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 200 mm, clearance between the columns: 2,500 mm, retraction force: 100 t, oil tank capacity: 50 l, total length: 3,500 mm, total width: 4,500 mm, total height: 2,300 mm, overall weight: 6,000 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, We offer this Dimter Profitest 2500 gluing press in like-new condition, manufactured in 2009. Gbedpfx Aozin Aieayjt Manufacturer: Dimter Model: Profitest 2500 Year of manufacture: 2009 Condition: like new Type: gluing press If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2007, Doosan MX 2500 LST Year: 2007 Fanuc 18iT-B Includes tooling Gbodpfx Ajzzxv Rjayet Capacity Turning length mm: 1,520 Swing diameter mm: ø 540 Swing over bed mm: ø 750 Swing over cross-slide mm: 600 Bar work capacity mm: 76 Turn-mill spindle X-axis travel mm: 555 Y-axis travel mm: 160 (+-80) Z-axis travel mm: 1,595 B-axis degree: 240º (+-120º) Tool system: Capto C6 Tool storage capacity: 40 Spindle speed rpm: 10,000 Lower turret X-axis travel mm: 185 Z-axis travel mm: 1,640 Number of tool slots: 12 Speed of driven tools RPM: 4,000 Main spindle Spindle speed rpm: 3,500 Counter spindle Spindle speed rpm: 3,500 Counter spindle travel mm: 1,565 Coolant system Tank capacity liters: 500 High-pressure bar: 70

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Gbedpfx Aaozwvv Toyjt Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm Gedpfx Aexu Dipeayebt • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. - Sale according to our general terms and conditions.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, total width: 2,600 mm, total length: 18,000 mm, total height: 3,620 mm, input voltage: 400 V, input frequency: 50 Hz, The ADL 2500/6 INOX is a fully automatic production line for the manufacture of insulated glass. The line consists of a stainless steel washing machine and a panel press and is designed for efficient, precise, and reliable processing of insulated glass. The washing section is entirely made of stainless steel and equipped with six individually controlled brushes, suitable for processing Low-E glass. Thanks to the automatic glass thickness detection and the servo-controlled panel press, a constant and high-quality result is guaranteed. Year of construction: 02/2024 Maximum glass size: 2,500 × 3,210 mm Minimum glass size: 240 × 400 mm Insulated glass thickness: 10 – 60 mm Washing machine glass thickness: 3 – 12 mm (without adjustment) Maximum glass weight: 400 kg Power supply: 3 × 400 V + N + PE, 50 Hz Installed power: 43.5 kW Gbedpezzczdsfx Aayst Air pressure: 6 bar Air consumption: 70 l/min Transport speed: 0 – 6 m/min Dimensions (L × W × H): 21,000 × 3,300 × 3,530 mm Machine weight: 7,580 kg Direction of operation: left to right Complete stainless steel washing section Enclosed washing unit with sound insulation Six individually controlled brushes for Low-E glass Automatic detection of glass thickness Electric panel press with servo-controlled pressure regulation Touchscreen control (English or Italian) Industry 4.0 ready (OPC UA compatible) Output conveyor belts with dual speed for higher productivity Available from mid-September 2026. If interested, you can contact Carmen Ernest directly for a viewing or additional information. +31 6 14334647

Condition: good (used), Grundwald 2-lane tray destacker/filler/topsealer/lidding machine for round cups with 85/95 mm diameter. Year of manufacture: 2000. Power: 2.7 kW/400 V. Gbjdpfx Aexuqhfoayjt

Condition: used, Year of construction: 2006, Kern 2500 Document Inserter & Multimailer, Kern Man Machine Interface, 10 & 6 x 9" Infeed Hopper, (6) x Document Infeed Hoppers, 12 Position Carousel Packing Unit, Outfeed Conveyors, Cognex Scanner System, SMX 3.2m Footprint. S/No. 6017410.001 (2006) Highest bid is subject to vendors approval. Please Note: This lot is located in Birmingham, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Gbsdpjzwnuuefx Aayjt

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Center distance: 635 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Speed steps: 12 Speed range: 40–2,500 rpm Taper in tailstock: MK 3 Tailstock quill travel: 110 mm Gsdpfx Aezz Rm Isayebt Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Gbsdjifkldepfx Aayot Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. Godozy I Rzepfx Aayobt It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Gbjdpfx Aaot S Efgsyjt Total power 37,7 kW Very good condition, available immediately.

Year of construction: 2012, condition: ready for operation (used), A repair-required OTI shot blasting machine is offered. 1) OTI GG A2-2500 blasting system, working length: 6000mm. 2) OTI blasting cabinet, cabinet dimensions X/Y/Z: 1650mm/13500mm/3800mm, internally illuminated, with automatically guided blast nozzles and rubber curtains for cabinet protection. 3) Chain conveyor unit, continuously variable motor-driven, with chain guide, roller conveyor, tension frame bearing and chain tensioner. 4) Oscillation, continuously variable motor-driven. 5) Blast media filling station, pneumatically operated, filling hopper: approx. 150kg, with level probe and shut-off slide, max. filling weight: approx. 200kg. 6) Cyclone separator/pre-separator system for separating reusable and spent blast media, with blast media recirculation into the blasting process and Big-Bag collection. 7) Filter system with radial fans, 2x 8 filter cartridges, cartridge dimensions X/Y: 330mm/1000mm, filter area: 14m²/cartridge, extraction capacity: 10000m³/h, with compressed air cleaning. 8) Final filter with pleated filter elements, 2x 2 filter elements, filter element dimensions X/Y: 915mm/915mm, separation efficiency: 99.9%. 9) Control cabinet with controller: Moeller Easy 820/618. 10) Operator panel with beacon/signal light, display, start pushbutton, key switch, emergency stop pushbutton and pressure gauges for operating pressure and inlet pressure. 11) Pressure vessel Maschinen- und Behälterbau GmbH, type MB 030603-1.1000, year of manufacture: 2012, volume: 1000l, permissible pressure: 11bar, min./max. permissible temperature: -10°C/50°C. Documentation available. An on-site inspection is possible. Godpezp Rg Refx Aayobt

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 5.5 kW (7.48 HP), pressing force: 80 t, stroke length: 150 mm, total length: 3,180 mm, total width: 1,250 mm, total height: 2,450 mm, overall weight: 6,000 kg, Equipment: documentation/manual, Accessories: 3 x bending prism, 3 x top beam, several bending segments, backstop, stroke counter, manual night operation. Technical parameters: Rated force 800 kN, Working table length 2500 mm, Table width 160 mm, Ram speed: downward 50 mm/s, pressing 10 mm/s, upward 100 mm/s, Maximum ram stroke Z 150 mm, Distance between side frames B 2050 mm, Overhang A 250 mm, Maximum opening height H 380 mm, Parallel ram stroke accuracy 0.1/1000 mm, Working fluid pressure 24 MPa, Electric motor power: main 5.5 kW, Machine dimensions: length (with cabinet) 3180 mm, width 1250 mm, height 2450 mm, Machine weight 6000 kg. The machine can be tested in our warehouse in Přerov by arrangement. Gbodpfx Aaozzffrjyot

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Gbsdpezrwypefx Aayet Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: excellent (used), Year of construction: 2018, VPS 100/2500 cardboard cutting machine – fully functional Fully automatic production of outer packaging from continuous cardboard Application: Packaging of high-quality aluminum rims with precisely fitting packaging to prevent slipping Working width: up to 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.5–7 mm Tool width: approx. 45 mm Operating hours: 13,072 in a single-shift operation Accuracy: Longitudinal cuts: ±0.2 mm Length tolerance: ±1.5 mm/m Packaging size: 600 × 600 × 300 mm Output: approx. 55 s per packaging unit Bottom/lid construction Production of individual packaging for exclusive forged wheels. Bottom with corner locks to hold the rim upright Lid according to FEFCO 0331 If required, development of tightly fitting packaging concepts in consultation with the customer Packaging design Integrated software for creating your own packaging designs Database with approx. 250 packaging designs Gbodpfxszmbi Dj Aayjt The machine processes continuous cardboard fully automatically. The patented multi-tool performs creasing, scoring, perforating, and cutting using the single-point principle. The material-friendly creasing technology prevents the cardboard from splitting. Perforations are performed using an oscillating knife with a freely adjustable perforation level. Cuts are made with a toothed knife on a rubberized roller, creating clean, fiber-free cut edges. All tools are adjustable by servomotor. Machine construction Welded construction 6 multi-function tools for longitudinal processing (optional up to 12) 1 transverse processing tool 2 rubberized rollers Segment-controlled overpressure Control: Industrial PC Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) Windows 10 IoT Enterprise Beckhoff TwinCAT 3 21" multi-touch panel Control cabinet integrated Software functions: Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Monitoring of residual lengths Production data acquisition (CSV) Plain text error messages Automatic cardboard changer Automatic selection of the optimal cardboard web width. Standard with two positions, expandable to six or, with side-by-side function, to up to twelve web widths. Additional cardboard magazines expand the system with additional web widths and have their own sensors and residual length management. Box designer Programming software for customer-side workstations for the free creation and programming of individual cardboard designs. General condition The system is in good overall optical and technical condition. The machine cladding, safety devices and conveyor components are complete and intact. No visible damage, corrosion or significant signs of wear can be detected. Maintenance performed internally by the company via SAP-PM Every 6 months electrically Every 3 months mechanically

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm Gjdpfx Aozrwzajaysbt New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Turning length: max. 705 mm Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Gedpozwgwzjfx Aayobt Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 MACHINE DETAILS Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine