Used Gossen Pantam Constant for sale (1,231)

Condition: good (used), Constant, oscilloscope -220 V 40-60 Hz -Dimensions: 245/270/H185 mm -Weight: 8 kg Hjdpfx Aeb A N Niecrjl

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures. Hjdpfsrdzg Hex Acrsl

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ Hedpoywcr Defx Acrsl INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety Hjdpfx Acoywcrwsrol SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Gossen, control plug-in cards circuit boards -Switching regulator card: Constant S83 S5 EU 12 -Plug-in card: 7204-6072C0 -Temperature controller card: Gossen Pantatherm DS 4 4400-S 8 pieces Hjdjnah Drjpfx Acrsl -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 5.2 kg

Condition: used, Bench Grinder – CONSTAN New Star Motorist Manufacturer Constan – New Star Motorist (France) Type Double-wheel bench grinder (three-phase motor) Industrial Applications - Manual tool sharpening - Deburring of metal parts - Surface preparation and light grinding - Maintenance and repair workshop tasks Main Technical Specifications: Hedpfx Acew Ec Nrerjl - Power supply: 220 / 380 V – 50 Hz (three-phase) - Motor power: 1.5 HP - Current: 1.8 A at 380 V - Speed range: 2030 RPM max, 1550 RPM min - Rotation direction indicated by arrow 🧩 Machine Usage Heavy-duty bench grinder designed for tool sharpening, rough grinding, and surface cleanup. Ideal for general mechanical workshops, tool rooms, and industrial maintenance tasks. ⚙️ Features / Differentiators Equipped with a dual-voltage industrial motor, this grinder is adaptable to standard workshop three-phase networks. It stands out with a wide speed range, making it suitable for both fine and coarse grinding operations, and a 1.5 HP integrated motor, offering power and durability.

Condition: ready for operation (used), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible. Hsdjycigwopfx Acrjl

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Hodpfxsxuf Uae Acrol Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The bidirectional constant current source is designed for battery cycling and can supply or measure voltages from 0 to 20 V and supply or measure currents up to 3 A. The device can operate either as a current source (positive current) or as an electronic load (negative current). Interfaces available are LAN and USB. The unit comes equipped with various additional features. The NGM-K103 Digital Trigger I/O option enables connection to external measuring instruments, while the NGM-K104 DVM option provides functionality as an independent digital voltmeter. With the NGM-K106 Battery Simulation option, the device can simulate battery currents and voltages. Bidirectional power supply unit, max. voltage 20 V, max. current 3 A, 60 W power output, interfaces: LAN and USB, installed options: NGM-K103 Digital Trigger I/O, NGM-K104 DVM Option, NGM-K106 Battery Simulation Hedsytrnfopfx Acrel Includes power cable and USB cable.

Condition: ready for operation (used), Gossen Metrawatt Camille Bauer GTA0615B4H1K2N1T1 line recorder, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Hjdpfx Aji Eacdecrel

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hang 101-60 oiling machine Electric double oiling machine Can be used for paper, cardboard, plastics or for forgery-proof documents. For inserting 2 eyelets at a fixed distance of 80 mm, with push-button release Punching and eyeletting in one operation. * Eyelet type 270 * Inner diameter 5 mm // Height: 6.5 mm // Outer diameter: 9.4 mm * Ease 10 - 50 sheets (standard 80 g/sqm copy paper), pre-punching is recommended for more than 25 - 30 sheets * Automatic eyelet feed via magazine * Weight 50kg Hedpfx Ajrmnc Necrsl Very good condition

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills. Hodpfx Acet N R Nrjrjl

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V Hjdpfjvac Hhsx Acrjl The machine has documentation, maintenance tools, drills, and a new column

Condition: excellent (used), ESPEC Climate Test Chamber ARS-0680-AE Device Data Manufacturer: ESPEC Model: ARS-0680-AE Year of manufacture: 2017 Type: Climate test chamber Cooling: air-cooled Hodpey H H Uhofx Acrol Description Used climate test chamber by ESPEC. Suitable for temperature and humidity testing. Ideal for use in research, development, and quality assurance. Operating Condition Status display: STOP (ready for operation). Operating hours: approx. 5,887 hours. Technical Data Temperature range: approx. -45 °C to +180 °C Humidity range: approx. 10 – 98% RH Temperature change rate: approx. 4–6 K/min Test chamber volume: approx. 680 liters Dimensions Interior (W x H x D): approx. 850 x 1000 x 800 mm Exterior (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data 400 V / 3~ / 50 Hz Current consumption: approx. 22–27 A Cooling System Refrigerants: R23 / R452A R23: 0.65 kg (GWP 14800) R452A: 2.1 kg (GWP 3920) Air-cooled (no external water connection required) Weight Approx. 505–615 kg Features Touchscreen control panel Program operation and constant operation Viewing window Stainless steel test chamber Interior lighting Cable ports Water tank system for humidity operation Mobile (castors and leveling feet) Scope of Delivery ESPEC climate test chamber ARS-0680-AE Documentation (if available) Service before delivery (optional) Function check Refrigerant service Leak test Trial run with log Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transportation can be organized on request. Subject to prior sale and changes. Please contact us if you have any questions.

Condition: excellent (used), Binder Climate Test Chamber MKFT 720 E3.2 Device Information Manufacturer: Binder Model: MKFT 720 E3.2 Year of Manufacture: 2017 Item Number: 9020-0288 Design: Climate Test Chamber (Change-over type) Cooling: Air-cooled Description Used Binder climate test chamber. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Intended for applications in industry, research, development, and quality assurance. Technical Specifications Temperature Range: -70 °C to +180 °C Humidity Range: 10% to 98% RH Internal Volume: approx. 734 liters Max. Total Load: 160 kg Max. Load per Shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection Class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. Operating Pressure: 29 bar Performance Data - Temperature Temporal temperature deviation: 0.1 to 0.5 K Spatial temperature deviation: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data - Climate Climatic range: +10 °C to +95 °C Humidity range: 10% to 98% RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Features Touch control panel Hsdpfey H H Smex Acrel Programmable and constant operation modes Observation window Stainless steel test chamber Interior lighting Cable port Mobile on castors Robust industrial design Weight Approx. 635 kg Scope of Delivery Binder climate test chamber MKFT 720 E3.2 Scope of delivery as shown Service prior to delivery (optional) Functional test Refrigeration service Leak test Test run with protocol Condition Used. Condition as per images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged on request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40°C to +180°C Humidity range: 20% to 98% RH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Equipment Touchscreen control panel Programmable and constant mode operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable port Overheating protection Hour counter Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Service before delivery (optional) Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in photos. Note Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Hedpsy H H Iuefx Acrel Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), CTS Climate Test Chamber Type: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for the simulation of various environmental conditions and is typically used in industrial, research, and quality assurance settings. It allows for precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and high-performance control system, it supports both rapid temperature changes and constant long-term tests. The system is water-cooled, ensuring stable and efficient operation. Technical data: Model: CS-70/1000-5 Test space volume: approx. 1000 liters Control system: - Multi-touch controller with integrated program generator - Programmable test sequences Side pipe / cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: - –70 °C to +180 °C - Change rate: up to 5 K/min - Temperature stability: ±0.3 K Climatic data (humidity): - Humidity range: 10% to 98% r. h. - Dew point range: –10 °C to +94 °C Dimensions: - External (HxWxD): approx. 1950 × 1270 × 2245 mm - Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical data: - Connection: 400 V / 3/N / 50 Hz - Power: 17.6 kW - Rated current: 28.5 A Refrigeration system: - R452A – 5.1 kg – GWP 2140 - R23 – 2.1 kg – GWP 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar - Protection rating: IP 22 Weight: approx. 900 kg For your safety as a buyer, please note the following: The following procedures are carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. Documented test run Condition: used The unit can be fully inspected as depicted in the photos. Hodsy Hkc Aspfx Acrsl Display: STOP / manual mode Scope of delivery: - CTS climate test chamber CS-70/1000-5 - Delivery as shown in the photos Inspection by appointment is possible. Loading by forklift can be organized. (Subject to changes and errors in technical data!) We are happy to answer any further questions by phone.

Condition: excellent (used), ESPEC Climate Test Chamber Type: ARS-0680-AE ESPEC Climate Test Chamber / Environmental Simulation Chamber Rate of Change: up to approx. 5 K/min Model: ARS-0680-AE Year of Manufacture: 2018 For sale is a high-quality ESPEC climate test chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected as shown in the images. The current display reads STOP / Ready for operation. Operating hours (according to display): approx. 6,950 hrs. Technical Data: Model: ARS-0680-AE Test chamber volume: approx. 680 liters Temperature range (typical for ARS-Series): approx. -70 °C to +180 °C Humidity control: available Rate of change: up to approx. 5 K/min Internal dimensions (W x H x D): 850 × 1000 × 800 mm External dimensions (W x H x D): 1050 × 1955 × 1805 mm Electrical connection: AC 400 V / 3~ / 50 Hz Hjdpjy Hkb Sofx Acrol Max. current consumption: 27 A Weight: approx. 615 kg Year of manufacture: 2018 Cooling: air-cooled (no external water connection required) Refrigerants according to nameplate: R452A – 2.3 kg – GWP 2141 R23 – 0.65 kg – GWP 14800 Features / Equipment: Touchscreen control panel Programmable operation and constant operation modes Observation window in the door Stainless steel test chamber Chamber lamp / interior lighting Side ports for pipe and cable entry Ethernet interface Specimen temperature input Power supply control for specimen Time signal outputs Water tank system for humidity control Mobile/caster-mounted design Weight: approx. 615 kg For your safety as the buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Scope of Delivery: ESPEC Climate Test Chamber ARS-0680-AE incl. available documentation Scope of delivery as shown in the images Condition & Notes: Condition: used Inspection possible by prior arrangement. Loading by forklift can be arranged. (Subject to change, prior sale, and errors in technical data!) If you have any questions, please feel free to contact us.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade Hedpfx Acoif Ek Rersl • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Hsdpjwgc I Rofx Acrol Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and Fine Sanding Automatic, Kundig Brilliant Wide Belt Sander with electronic segmented sanding pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be provided on request. Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic sectional pressure bar Edge segments can be individually activated/deactivated Segment width of the pressure bar: 22mm (ideal for lacquer intermediate sanding) Pneumatically adjustable calibration roller, grooved rubber-coated roller with grain compensation Drive motor: 11kW Infinitely variable belt speed: 3 - 15 m/s via frequency converter Hedeyxg N Nspfx Acrjl Feed belt infinitely adjustable from approx. 3 to 15 m/min Workpiece-controlled belt blow-off device Constant table height approx. 950mm by adjusting the upper part of the machine, thus integrable into sanding lines Feed belt remains very grippy and is in excellent condition Carpet with adjustable vacuum fan allows safe holding of small workpieces Maximum sanding width approx. 1100mm Workpiece height approx. 3.5 to 200mm Abrasive belt dimensions: 1120 x 2000mm Infeed and outfeed roller tables Hood lock Extraction connections: 1 x 180mm, 1 x 125mm Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt blow-off nozzle, vacuum fan, calibration roller adjustment, and parameters of the segmented sanding pad. Thickness measurement system with adjustable material removal and Enormatic automatic thickness setting with feed release, making constant caliper measurement unnecessary. Programs for different sanding tasks are storable and selectable via smartselect. CE mark Operating manual 2 sanding inserts available The four bellows have been replaced Supplied without the mains connection cable shown Original paintwork, only minor touch-ups Very good condition from a small workshop Machine has approx. 1,395 operating hours, or about 2 hours per week Dimensions approx. 1900 x 1650 x 2150mm (LxWxH) Weight approx. 2,300kg With large mobile storage table at belt height for storing sanding belts Table size approx. 1520 x 1360 x 950mm Includes various sanding belts from K80 to K400 The machine can be demonstrated on site by appointment. We only offer machines that are immediately operational and ready for demonstration at our warehouse. See 'Other Offers from this Supplier.'

Condition: good (used), Year of construction: 2008, functionality: fully functional, The Depo/ZPS machining center features an overhead gantry, meaning that all machine movements are performed by the tool. As a result, the mass of the workpiece and clamping device remains constant during machining. Year of manufacture: 2008 Spindle hours approx. 3,500 h (after spindle replacement in 2023) Control system: - Heidenhain iTNC 530 - Heidenhain HR 410 handwheel - Swiveling control panel with 15.1" monitor - Integrated Ethernet interface Technical Data Travel ranges: X 1,000 mm, Y 900 mm, Z 600 mm Work table: Hodpfsy Hp Rrox Acrol - 1,200 mm x 1,000 mm - Max. workpiece weight: 3,000 kg - Max. workpiece size: 1,000 mm x 800 mm x 700 mm Milling spindle: - Continuous power: 30 kW - Speed range: 1-18,000 rpm - Torque S1/100%: 80 Nm - Tool holder: HSK 63 form A - Main spindle jacket cooling - Air through spindle center for tool cooling (ILZ) - Coolant with 40 bar through the spindle (IKZ) Axes feed rates: - X, Y, Z axis feed up to 40 m/min - X, Y, Z axis rapid traverse up to 40 m/min Tool changer with double-arm gripper: - Number of tools in drum magazine (outside working area): 38 - Max. tool diameter: 80/115 mm - Max. tool length: 250 mm Tool and workpiece measurement for automatic tool and part size adjustment: - Tool radius and length measurement - Tool breakage detection - Blum laser for component measurement (Inspect) Disposal system: - Gooseneck slat conveyor - (Chip cart to be provided by buyer) Additional equipment: - Minimum quantity lubrication Minibooster 2 - Machine enclosure with full-area protective covers - Crane loading possible by unhooking the chip protection device at the front - Workspace lighting with two fluorescent lamps on the side walls Machine data: - Space requirement including service areas (LxWxH): approx. 5,000 mm x 4,220 mm x 3,830 mm - Machine weight incl. additional units: approx. 13,000 kg - Connected load: 45 kVA, 400V, 50 Hz This machining center is located in a precision tool and mold making shop. It is exceptionally well-equipped with practical features and is in very good condition. The Depo/ZPS Dynamic 1009 operates precisely and reliably. There is no maintenance or repair backlog.

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Hedpfjy Ifaxsx Acrol Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), functionality: fully functional, The AERA blue-cord slicer optimizes industrial preparation with efficiency. Designed for fast, accurate cutting, it uses multiple ribbon slicers to guarantee uniform results. In addition, the trim conveyor handles products before cutting, while the blue-cord folder shapes each product perfectly. With its pneumatic control system and belt scrapers, the slicer ensures high performance. What's more, the titanium cutting carriage, equipped with automatic lubrication, reduces maintenance requirements. In conclusion, the AERA model improves both quality and production efficiency, while complying with industrial requirements. COMPOSITION : FILLING CONVEYOR Overall dimensions (L x W x H): 6400 x 1000 x 970mm. Weight: 970 Kg Sliding surface height: 960 +/- 50mm. Stainless steel tubular legs and jacks Synchronous belt width 600mm. Lyre-shaped winding Pneumatically-operated belt quick-release system Servo-motor control with positioning register. Belt scrapers TRANCHEUR Hsdpfx Acju Ivcisrsl Overall dimensions (L x W x H): 1880 x 1030 x 2460mm Weight: 1000 Kg Stainless steel frame: 20 mm Stainless steel panel housing with magnetic safety sensor and pneumatic locking during operation. Components : The slicer is equipped with 4 magazines consisting of : 4 synchronous pinned belt conveyors controlled by a servomotor 4 chutes defined according to the products to be sliced pneumatic control of chute release from loading belts CUTTING CARRIAGE Cutting is performed by a ribbon blade on 2 titanium 200 flywheels mounted on a titanium crosspiece The cutting carriage is guided by "Hepco inox" rails and rollers The cutting motion is driven by a Sew Usocome servo-reducer, a through shaft and two connecting rod-crank systems. The flywheels are driven by a Sew Usocome geared motor equipped with a transmission shaft and an expanding pulley for constant V-belt tension. A torque-limiting tensioning system enables correct adjustment of the tension on the ribbon blade. Cutting blade lubrication is provided by an automatic gun fed by a low-pressure water network. INFEED CONVEYOR : Slabs are received and distributed by a two-ply polyurethane belt conveyor driven by a Sew Usocome servo-reducer. Product deposited by a 16 mm diameter saber at the end of the conveyor. Quick belt release system. Open-worked bottom for easy cleaning. Conveyor made entirely of stainless steel.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Hedey Ew N Hjpfx Acrel Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges