Used Heller Drz20-2-1250 for sale (78,311)

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Chjdpfjzdpvgsx Apbsc Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 2013, HELLER 7 Machines: H 6000 MCH 280 MCH 250 We offer, directly on behalf of the owner, the following machines due to a site relocation: 7 x HELLER 4-axis horizontal machining centers Manufacturer: Heller 1. Type: H 6000 Year of manufacture: 2011 Operating hours: 28,338 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 150 2. Type: H 6000 Year of manufacture: 2009 Operating hours: 33,963 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 165 3. Type: H 6000 Year of manufacture: 2013 Operating hours: 26,025 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Defect in spindle / B-axis 4. Chsdpfoz Ihpwex Apbsc Type: MCH 280 Year of manufacture: 2011 Operating hours: 44,454 Control: Simumerik 840 D Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Tool positions: 100 5. Type: MCH250 Year of manufacture: 2008 Operating hours: 49,905 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 6. Type: MCH250 Year of manufacture: 2008 Operating hours: 43,820 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 5-position Tool positions: 100 7. Type: MCH250 Year of manufacture: 2007 Operating hours: 58,084 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 The sale is without clamping devices and tool holders. Further details and technical information are available upon request.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 625RS10HWPp-D22092022, coil weight: 10,000 kg, feed rate X-axis: 35 m/min, number of straightening rollers: 5, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,250 mm, mandrel diameter: 508 mm, coil width: 1,250 mm, coil outer diameter: 1,250 mm, number of blades: 8, type of input current: three-phase, working width: 1,250 mm, total width: 4,500 mm, total length: 5,700 mm, total height: 1,600 mm, load capacity: 10,000 kg, product width (max.): 1,250 mm, space requirement width: 4,500 mm, space requirement length: 5,700 mm, space requirement height: 1,600 mm, Krasser Centurio SCS-1250 slitting line with a Stolarczyk 10-ton motorized uncoiler For sale: a complete coil-fed sheet metal cutting and slitting line, manufactured by Krasser GmbH (Austria), installed new in January 2023 and used in-house ever since by a sheet metal processing company. Well-maintained, fully operational, and available for inspection while still running at our facility. Krasser Centurio SCS-1250 – slitting/cutting line Max. sheet/coil width: 1,250 mm — min. independent sheet width: 250 mm — min. slitting width: 75 mm between knives Material thickness range: steel (400 N/mm²) 0.4–1.5 mm, stainless steel (550 N/mm²) 0.4–1.0 mm, copper and aluminum 0.5–2 mm Max. cutting speed: 35 m/min Straightening unit: 5 rollers Longitudinal cutting: 6 pairs of slitting knives installed (5 standard + 1 additional pair), max. 8 Cross-cutting: electrically driven guillotine shear Roller-shear unit for partial cross-cuts included Automatic film-application (plastic protective film) unit included Automatic labeling unit included (label printer + applicator) Krasser Optimizer cutting-optimization software included Touchscreen HMI control, multilingual (including Spanish) CE-certified safety fencing Electrical connection: 3-phase 400–488V, 11 kW, 16A Pneumatic connection: 1/2", 6 bar, filtered and dried air, 50 l/min Approx. overall footprint (line + uncoiler): 5.7 m long x 4.5 m wide x 1.6 m high Lifetime production data (as of today): 176,941 m of material processed, 60,610 cross-cuts — machine has been in steady, reliable production use Stolarczyk uncoiling set (motorized, 10 tons) Manufacturer: Spółka Stolarczyk (Poland) — Type RS10HWPp-D, year 2022 Csdpfx Apez D Ivvsbehc Max. coil load: 10,000 kg (10 tons) Hydraulic mandrel expansion — mandrel/coil inner diameter 508–610 mm Max. coil outer diameter: 1,250 mm — coil width: 250–1,250 mm Max. unwinding speed: 30 m/min Coil car included, with hydraulic vertical lift (306 mm) and electric horizontal travel Electrical connection: 400V, 6.5 kW Weight: 3,150 kg The line and uncoiler are sold together as a working unit. Removal/dismantling and logistics to be agreed with the buyer. For technical questions or to arrange a visit, please contact us by email — we're glad to answer any question and share further documentation, photos, or a video of the machine running.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. Codpfxex Hn D Do Apbehc - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits Cjdpfox D Skmex Apbjhc • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,358 h, machine/vehicle number: K22268, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: JORNS, working width: 6,410 mm, folding beam adjustment: 200 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, back gauge speed R-axis: 283 mm/s, back gauge travel distance R-axis: 1,250 mm, back gauge travel distance Z-axis: 1,250 mm, overall weight: 13,000 kg, total length: 8,500 mm, total width: 3,354 mm, total height: 1,938 mm, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, We offer this used Jorns JDB-150G-DP-1250-JC100-6.4-dsp panel bending machine for sheet metal, manufactured in 2023. Year of manufacture: 2023 Model: JDB-150G-DP-1250-JC100-6.4-dsp Rated current: 80 A Cjdpez Dillsfx Apbshc Operating voltage: 3 × 400 V Frequency: 50 Hz Control voltage: 24 VDC Maximum hydraulic pressure: 210 bar Maximum pneumatic pressure: bar If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Year of manufacture: 2012 Control system: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK 63 Tool magazine / positions (options): Chain / 54 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Chjdozpyg Tjpfx Apbjc Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Hydraulic, 60 bar Additional options, special features: Infrared receiver for measuring probe (RENISHAW); SBBK; Pneumatic support control at the workpiece setup station; Status indicator light; Chip conveyor for wet machining;

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Chsdpfx Asx Hn D Rspboc Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 1985, functionality: fully functional, spindle mount: MK 5, height adjustment type: mechanical, total width: 2,100 mm, total length: 900 mm, total height: 3,300 mm, overall weight: 3,000 kg, drilling capacity: 60 mm, clearance between the columns: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 20 rpm, spindle stroke: 400 mm, Radial drill BR 40/2 x 1250. Chsdpfxswazbvj Apboc Prod. Heckert (GER). Year 1985. Max drilling diameter in steel (mm) - 60 mm Max threading diameter in steel - M24 Max workpiece height - 1100 mm Spindle stroke - 400 mm Arm length - 1250 mm Arm rotation - 360 Drill attachment - MK5 Rotation speed range (rpm) - 20-1200 rpm Feed range - 0.063-0.63 mm/rev Base plate mounting surface - 1400 x 800 mm Table dimensions - 650 x 650 x 500 mm Machine dimensions width x depth x height - 2100 x 900 x 3300 mm Motor power - 3.7 kW Weight - 3 tons

Condition: used, Colchester Magnum 1250 Gap Bed Centre Lathe. Distance Between Centres 4000mm (157"). Swing Over Bed 635mm (25"). Swing In Gap 900mm (36"). Spindle Bore 118mm. Spindle Speeds 6.3 - 1250rpm. Leadscrew 2 TPI. Rapid Power to Saddle & Cross Slide. Quick Change Tool Post & Holders. 3 & 4 Jaw Chucks. 3 Point Roller Bearing Steady. Newall DP 700 Digital Readout & Tooling. Csdpfjzy Im Nox Apbjhc Weight Approx: 6000KG

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 50 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. Chjdjz Ixt Hopfx Apbjc - Machine Count: 2 units- B-Axis (NC Rotary Table) Resolution / Indexing: 360,000 x 0.001 deg- B-Axis (NC Rotary Table) Speed: 25 rpm- B-Axis Indexing Accuracy Tp (VDI/DGQ 3441 / ISO 230 At): 8 arcsec- B-Axis Max. Tangential Moment: 12,000 Nm- B-Axis Max. Tilting Moment: 18,000 Nm- Voltage / Frequency: 3~ 400 V / 50 Hz- Nominal Current: 65 A- Short Circuit Current Rating: 9 kA- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Rapid Traverse (POWER Package X/Y/Z): 50 m/min- Acceleration (POWER Package X/Y/Z): 5 m/s²- Rapid Traverse (SPEED Package X/Y/Z): 65 / 65 / 72 m/min- Acceleration (SPEED Package X/Y/Z): 7 / 7 / 11 m/s²- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Tool Taper: HSK-A 100 / SK 50- Speed Range: 5 - 8,000 rpm (Power Cutting 100 G / Power Cutting enforced 100 G) / 5 - 6,000 rpm (High Power Cutting 100 G) / 5 - 13,000 rpm (Speed Cutting 100 i) / 5 - 10,000 rpm (Power Cutting 100 i) / 5 - 12,000 rpm (Dynamic Cutting 100 i)- Drive Power (ED S6-40%): 43 kW / 45 kW / 60 kW- Max. Torque (ED S6-40%): 228 Nm / 360 Nm / 400 Nm / 822 Nm / 1,146 Nm / 2,292 Nm- Front Bearing Spindle Diameter: 100 mm / 110 mm- Max. Permissible Tool Mass: 25 kg (8 kg if every location occupied, 35 kg option)- Tool Chain Magazine Slots: 50 / 100 / 150- Tool Rack Magazine Slots: 265 / 425- Max. Tool Length: 600 mm- Max. Tool Diameter: 112 mm (all locations occupied) / 280 mm (with free locations)- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Mass (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time (without hydraulic clamping): 13 s- Pallet Change Time (with hydraulic clamping): 13.5 s- Coolant System Option PBF: Paper band filter Interlit TMF 600, 40 µm nominal fineness, 1,800 L tank capacity, 50 bar / 70 bar high-pressure coolant (IKZ) option- Coolant System Option VRF: Backwash filter KNOLL VRF 250, 40 µm nominal fineness, 1,200 L tank capacity, 50 bar / 70 bar high-pressure coolant (IKZ) option- Machine Floor Footprint (L x W x H with coolant & conveyor): 7.30 x 3.38 x 3.90 m- Total Operating Power (Machine without coolant system): approx. 37 kVA- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Estimated Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered on Technical Specification Taper Size HSK 100

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, Equipment: cabin, documentation/manual, Log sawing line: Chjdpfx Aezwf Ncopbec 1) WRAVOR band saw, model WRC-1250 2) Circular saw for edging and trimming with 3 movable blades and one fixed blade with PLC, model WRAVOR 20/120 3X 3) Wravor conveyors for removing lumber from the band saw, transferring to the edging machine, feeding into the edging machine, and a conveyor with left-right discharge at the outlet of the edging machine, plus a log feeding ramp for the band saw. The equipment can also be sold separately (either just the band saw or the edging machine). For sale: complete WRAVOR log sawing line, model WRC-1250 Wravor Sawmill Machinery, manufactured in 2019: 1) Wravor band saw WRC 1250 2) Circular saw for edging and trimming with 3 adjustable blades and one fixed blade, model WRAVOR 20/120 3X 3) Conveyors (log loading ramp, lumber discharge conveyor from the band saw, transfer to the edging machine, infeed conveyors for the edging machine, conveyor with left-right discharge at the outlet of the edging machine) Price for the entire line: 145,000 euros + VAT. The equipment can also be sold separately; for more details, please call:

Condition: used, Year of construction: 2009, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: OI-MC, table width: 700 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, spindle nose: DIN 40 ISO, number of slots in tool magazine: 24, CNC FANUC – OI-MC TABLE Table dimensions: 1400 x 700 mm T-slot dimensions / pitch: 5-18 x 125 mm Cjdpfxez H Npcj Apbohc Maximum allowable weight: 1000 kg CAPABILITIES: X-axis longitudinal travel: 1200 mm Y-axis transverse travel: 700 mm Z-axis vertical travel: 700 mm SPINDLE: Spindle mount: DIN40 ISO Rotational speed: 10,000 rpm Motor power: 11/15 kW FEEDS: Rapid traverse rate for X, Y, Z axes: 24000 mm/min Complete with: - Rotating table, 4th axis, with LCM HP250 tailstock - 24-position RANDOM-type tool magazine - Variety of collets - Remote electronic handwheel Year of manufacture: 2009

Condition: ready for operation (used), Year of construction: 2001, This 4-axis HELLER MCH 250 was manufactured in 2001. It features a robust coolant/filter unit, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Chedpfx Aoz Iyfqjpboc - Voltage: 400 V (3~)- Frequency: 50 Hz- Nominal Current: 185 A

Condition: good (used), Year of construction: 2006, functionality: fully functional, punching force: 30 t, total height: 1,900 mm, working range: 10,000 mm, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,400 kg, throat depth: 1,250 mm, compressed air connection: 6 bar, space requirement width: 4,000 mm, space requirement length: 3,200 mm, space requirement height: 1,900 mm, input voltage: 400 V, Euromac ZX INdex 1250/2000/30 *Includes Multitool 6 *Includes various tooling Year of manufacture: 2006 Punching force: 30 tons Working area: 1250 x 2000 X-axis movement: 2000 mm with extension up to 10,000 mm Y-axis movement: 1250 mm X-axis speed: 50 m/min Y-axis speed: 50 m/min Stroke: 30 mm Max. stroke frequency (in steps of 1 mm, 1 mm sheet thickness): 730 1/min Max. stroke frequency (in steps of 25 mm, 1 mm sheet thickness): 300 1/min Table height: 980 mm Motor power: 5.5 kW Oil tank: 115 l Length: 4000 mm Width: 3200 mm Cedpfxjz Dutuo Apbshc Height: 1900 mm Transport dimensions: 4000 x 2300 x 1900 mm Weight: 6400 kg Includes 6-position multitool holder 2 clamping jaws with automatic repositioning Table with brushes Automatic repositioning up to 10,000 mm Max. punching diameter with single tool: 88.9 mm Max. punching diameter multitool holder MTE6: diameter 24 mm Max. opening of the clamping jaws: 7 mm Transport width: 2350 mm Operating manual in English and Italian CE declaration available

Condition: like new (used), Year of construction: 2015, operating hours: 2,500 h, functionality: fully functional, AVAILABLE FOR INSPECTION DURING PRODUCTION DOOSAN HORIZONTAL MACHINING CENTER Model: HM1250 Year: 2015 Control Unit: FANUC 31I-B X-axis travel: 2100 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm Table length: 1250 mm Chsdpfxjz Ihnas Apbec Table width: 1250 mm Max. workpiece dimensions: DIAMETER 2300, HEIGHT 1725 Max. workpiece weight on table: 40000 kg Spindle speed: 6000 rpm Spindle connection: ISO 50 Torque (continuous / 10 min): 1989 Nm Number of tools: 90 positions High pressure: 70 bar

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Cjdpfxez Adt Rs Apbohc Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. The machine can be viewed while powered on by prior arrangement.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,460 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 18,500 W, bar diameter (max.): 80 mm, controller manufacturer: MITSUBISHI, controller model: M-730BM(MAPPS 4), number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI NLX2500SY/1250 was manufactured in 2013. It features a maximum X-axis travel of 260 mm, Y-axis travel of +/- 50 mm, and Z-axis travel of 1345 mm. The machine is equipped with a 12 station turret with milling function and a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX2500SY/1250 horizontal turning machine we have for sale. Contact us for further details. • Spindle 1: 18,5/15 kW, 4000 rpm; hollow spindle Ø 91 mm • Spindle 2: 11/7,5 kW, 6000 rpm; hollow spindle Ø 43 mm • Turret: Sauter 12-station with milling function, 6000 rpm • Y axis present • Stroke end detection • Bar feeder interface (prepared) Additional equipment • Automatic door (not original) Technical Specification Cedezxpq Hjpfx Apbshc Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2003. It features a robust X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Siemens 840D control unit and a tool magazine with 100 positions. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Tool Holder / Taper: HSK 100Tool Magazine Positions: 100Pallet Changer: IncludedX-Axis Travel: 800 mmY-Axis Travel: 800 mmZ-Axis Travel: 800 mmB-Axis Travel: 360,000 x 0.001°Spindle Speed: 6,000 RPMMeasuring Probe: Blum probeVoltage: 400 V (3~)Frequency: 50 HzRated Current: 123 A Technical Specification Taper Size HSK 100 Chsdpfx Apsz Ir Rxobjc

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2002. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis travel of 360,000 x 0.001°. The machine is equipped with a Siemens 840D control unit and a tool magazine with 100 positions. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. Cedpsz Ir Nhsfx Apbehc Control Unit: Siemens 840DTool Holder / Taper: HSK 100Tool Magazine Positions: 100Pallet Changer: IncludedX-Axis Travel: 800 mmY-Axis Travel: 800 mmZ-Axis Travel: 800 mmB-Axis Travel: 360,000 x 0.001°Spindle Speed: 6,000 RPMMeasuring Probe: Blum probeVoltage: 400 V (3~)Frequency: 50 HzRated Current: 185 A Technical Specification Taper Size HSK 100

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Chjdpfsx D I Aljx Apbjc • Control: Siemens Sinumerik 840D • Tool magazine: 160 • Tool holder type: HSK-63A

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m Chsdpfx Apetqqk Neboc

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Codpozfp Hhefx Apbshc

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Chedpfex U Ectsx Apbec Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8000 rpm Travel paths X: 1000 mm Cedjy Nybgepfx Apbehc Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Tool magazine positions: 400 Interface: HSK 100