Used Hidrobrasil Heating Press Double Column Press 120 T for sale (88,670)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side Bodpfxsk S Dt Te Al Aswu - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Bodpjhmbhqofx Al Aswu Size 1100x850 mm Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds Bjdpfjxrby Hex Al Aowu - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. Bwedpfx Alogrki Se Aju d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm Bedpfxehma Smj Al Aewu e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Dimensions Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press Bwedpfx Aetv Ewdjl Asu For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. The machine is ideally suited for the production of tablets, as well as for precise pressing and forming tasks in smaller batch production and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Machine type: Tablet Press - Design: C-Frame / Single-Column Press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Rapid closing: 120 mm/sec - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optionally foot control - Safety design complies with EU standards and UVV ==== Equipment - Table top designed as a tray with 50 mm edge and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Features - Multi-tool: 8 pressing cylinders - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees Bwedsgrkigjpfx Al Asu heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Bedpfx Aloph Uk Nj Aswu Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Bodshyc Nwopfx Al Aowu Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Bwedpfjitylgex Al Aeu Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Bwodpfx Ash Agnujl Aju Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, table width: 600 mm, table length: 600 mm, total length: 1,869 mm, total width: 850 mm, total height: 2,620 mm, overall weight: 2,900 kg, Hidrobrasil Single-Column Press – 30 t – 600 × 600 mm – 400 mm stroke For sale is a hydraulic single-column press (C-frame type) manufactured by Hidrobrasil, featuring 30 t pressing force and a compact design. The machine is equipped with a table size of 600 × 600 mm, making it ideal for assembly, straightening, and pressing operations, as well as for small batch production in workshop and manufacturing environments. ==== Technical Data & Information: Hydraulic Single-Column Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Design: C-frame press - Machine type: Assembly press - Pressing force: 30 t - Machine weight: approx. 2.9 t ==== Working Area Bwjdevhcykjpfx Al Aeu - Stroke: 400 mm ==== Table & Ram - Table size: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table fixing points: 600 / 800 / 1000 mm ==== Speeds - Downward speed: 10 mm/sec - Upward speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly operations, press-fitting operations, straightening work, workshop applications, small series production Hydraulic press, single-column press, C-frame press, assembly press, industrial press

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 20 t, Hydraulic 20 T single-column production press for the manufacture of lightweight concrete parts. Here are the technical data of the offered machine: If the press does not exactly meet your requirements, please click here to request an individual offer exactly according to your wishes: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly favourable prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Maximum open height 300 mm d) Pressing speed 4 - 10 mm/sec. ( adjustable via rotary control ) e) Die size 600x800 mm f) Ram size 950x600 mm g) Manual lubrication (via grease nipple) h) Pressure setting from 5 T to 20 ( adjustable via rotary control ) i) Travel 300 mm j) Installation, commissioning, instruction at extra charge Technical Data Press type C Press, hydraulic Thermal neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel on steel Max. 3 sec. Dimensions Max. Opening width 350/50 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 1900 mm Bwsdsia Nc Tepfx Al Aou Hall height min. 2,500 mm Parallel deviation at 20°C +/- 0.4 mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.6 mm/m Weight Total weight of the press without operating materials approx. 2.2 to Speeds Fast closing with 10 mm sec. Press speed 10-5 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders 1 pc. Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar Pressing pressure build-up time 03. apr sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/ASC approx. 6 L/min Oil volume approx. HLP 46 D 100 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 4 kW (C-press, hydraulic press, hydraulic press, concrete press) Are you looking for a customised machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply in all points with the national Brazilian safety directive NR 12, which is based on these. Our great strength is the construction of special machines and press automation. We sell customised hydraulic presses, press brakes and impact shears at surprisingly favourable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2021, pressing force: 10 t, Single-column press – Manufacturer Hidrobrasil – 10 t Assembly press – Table 600 × 300 mm For sale is a hydraulic single-column press (C-frame) from the manufacturer Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous shift operation and impresses with its robust construction, reliable hydraulic components, and flexible application possibilities in assembly and pressing processes. ===== Technical data + information: Hydraulic single-column press – 10 t ==== General information - Manufacturer: Hidrobrasil - Model: Single-column press / Assembly press - Design: C-frame press / Single-column press - Pressing force: max. 10 t (100 kN) - Machine weight: approx. 1.2 t - Dimensions (L × W × H): approx. 1,100 × 600 × 1,850 mm - Table height: 850 mm - Control sides: 1 ==== Working area - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder tension ==== Speeds - Forward speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar - Pump: Gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) ==== Drive & Electrical System - Motor power: 2.2 kW - Total connected power: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure setting via rotary control (0.5 – 10 t) - Cable remote control for upward and downward movement - Oil temperature display - Control cabinet cable: 3,000 mm cable with 16 A plug - Machine body powder-coated / double-coated ==== Control & Components - Control system: Siemens - Hydraulic components: Bosch Rexroth ==== Design & Safety - Robust machine body according to DIN 8651 - Cylinder induction-hardened and chrome-plated - CE certificate available - Documentation in German - Low maintenance and reliable - Complies with current EU directives Bwsdpshaqygefx Al Aou ===== Assembly work, pressing work, small series production, workshop applications, light forming technology Single-column press, C-press, hydraulic press, workshop press, pressing press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety regulation NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm Bsdpetwmp Sofx Al Aowu ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: new, Year of construction: 2026, machine/vehicle number: -, functionality: fully functional, pressing force: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press by Hidrobrasil, offering a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured at short notice, and individually customized. It is ideal for straightening, assembly, pressing-in, and pushing-out operations. ==== Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Max. opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Versions: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank capacity: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: manometer - Pressure adjustment: adjustable - Pressure switch: included - Power unit: side-mounted ==== Operation - Hand lever operation - Sensitive speed control - Pressure setting via rotary knob ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Operating mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Equipment and Features - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table versions available - Construction can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) Bwjdjyia D Repfx Al Asu - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ==== Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insert press, frame press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses surpass Canadian and European safety requirements by fully complying with the national Brazilian safety directive NR 12, which builds upon these standards. Our major strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double Column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was already built and delivered to a customer. We can manufacture this machine for you again on very short notice—customized to your individual requirements if desired. This is a hydraulic heated press with electrically heated plates and a manual sliding table for pressing, laminating, and forming processes involving heat. Base price: €42,000 net Options (on request): The listed options are based on completed customer projects and allow targeted customization of the machine to the specific application. The base machine provides a functional standard configuration—in practice, it is often supplemented with additional features and configured according to project requirements. ==== Technical Data + Information: ==== General Information * Design: Double column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area Bwodpfx Alsy H Dtzj Aou * Table size: 700 × 500 mm * Heating plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table stroke: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-point slide guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump output: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Control & Operation * SIEMENS S7-1200 control with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Dual-layer paint finish according to RAL ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, forming press applications Heated press, hydraulic press, double column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are manufactured in compliance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian National Safety Directive NR 12, which is based on and extends these standards. Our key strength lies in special purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, Year of construction: 2018, pressing force: 200 t, machine/vehicle number: DF0230, pressure:200 t distance between columns:1550 mm stroke:400 mm Bwjdpfofxyklox Al Aou dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 200 t Gantry Press – Table 4,000 × 2,000 mm For sale is a versatile portal straightening press from Hidrobrasil featuring a pressing force of 200 t. The machine is equipped with a large table area of 4,000 × 2,000 mm, a laterally movable cylinder, and a longitudinally adjustable bridge structure, making it ideal for large-format straightening, assembly, and special applications. ==== Technical Data + Information: Portal Straightening Press Hidrobrasil – 200 t Gantry Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry press - Pressing force: 200 t - Operating pressure: max. 285 bar ==== Working Area - Table size: 4,000 × 2,000 mm - Clear width / height: 1,500 mm Bwedpfx Alexrb Nbo Aou - Column spacing: 2,050 mm - Stroke: 1,500 mm ==== Movements & Travel Paths - Lateral cylinder adjustment: max. 1,450 mm - Longitudinal bridge movement: max. 2,800 mm - Approach speed: 20 mm/s - Working speed: 2 mm/s ==== Construction & Equipment - Hydraulic power unit mounted on top of the press - Hydraulic block and valves by Bosch Rexroth - Air and oil filters by Filtrec - Combination air and water cooling - Stroke cylinder integrated in the worktable - Machine control via wireless remote (2-button system) - Anti-rotation device for the cylinder - Machine status and diagnostics system with touchscreen ==== Auxiliary Stroke Cylinder System - Number of stroke cylinders: 10 units - Rod diameter: 25 mm - Stroke: 80 mm - Controlled via hydraulic system or control unit ==== Control & Operation - Siemens PLC: S7-1200 - Siemens Touchscreen: KTP900 – 9" - Up to 99 programs storable - Functions: - Setting stroke, pressure, and hold time - Decompression time - Piece counter - Alarm management - Real-time monitoring of all parameters - Positioning accuracy: ± 0.1 mm ==== Safety & Monitoring - Emergency stop system - Two-hand/wireless operation with safety release - Safety stripe on gantry columns - Hydraulic oil temperature monitoring - Automatic shutdown at overtemperature (> 65°C) - Filter monitoring - CE compliant ==== Hydraulics - Main drive power: 5.5 kW - Oil volume: not supplied - Oil temperature control with automatic cooling ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Components: Siemens, Allen Bradley, Phoenix ===== Straightening work, large components, assembly work, special purpose machine construction, steel construction, maintenance, press-fitting applications Gantry press, straightening press, hydraulic press, industrial press, special machine, tool matching press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which builds upon them. Our core expertise lies in special purpose machine construction and press automation. The hydraulic systems of our presses primarily utilize components from leading European manufacturers.

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressing force: 63 t, pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t Bwodpsfhcc Sofx Al Asu column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Bjdpfx Aofxygpsl Aewu Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Bedpjfxyh Rsfx Al Aowu heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake Bwsdezz Hg Depfx Al Aeu – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: new, pressing force: 300 t, For sale is a hydraulic portal straightening press (H-frame) from manufacturer Durendus with a maximum pressing force of 300 t. The machine features a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm, and a stroke of up to 600 mm, making it particularly suitable for straightening, alignment, and heavy forming applications in industrial environments. The machine shown here was built and delivered to a customer’s specification; we can manufacture this machine as a new unit on short notice. Available Options (upon request): The options listed below are based on completed customer projects and allow targeted adaptation of the machine to specific applications. The base machine is delivered in a functional basic configuration—in practice, it is most often expanded with additional features and configured to meet project requirements. Examples include: * Siemens S7-1200 PLC + 7” display for operator interface * Wireless remote control * Safety edge at the base of the portal columns (600 mm) * Table with T-slots * Motorized bridge positioning * Travel path extension * Larger open height * Light curtain under the bridge * Laser distance measurement * Lifting cylinder in the table ##### Technical Data & Information: Hydraulic Portal Straightening Press – H-frame – 300 t ==== General Specification - Designation: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Pressing force: 300 t (adjustable) - Distance between uprights: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max installation height: 1,000 mm - Table height from floor: 950 mm - Ram extension: 200–400 mm - Total weight: approx. 9,500 kg ==== Hydraulic Cylinder - Piston stroke: 0–600 mm - Max working pressure: 250 bar - Return speed: 16 mm/s - Ram speed: 10 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Pump capacity: 60 l/min - Tank volume: 250 l - Motor rating: 11 kW - Pressure accuracy: ±5 bar - Hydraulic unit: top-mounted - Valve technology: DUBLOMATIC - Filter: FILTREC - Oil level monitoring: electronic - Cooling: air cooling ==== Movement System Bwjdpfx Aloyzfkqj Aou - Bridge drive: 2 × 2.2 kW - Lateral cylinder movement: 0.75 kW - Movable bridge: yes - Laterally movable cylinder: yes ==== Control System - PLC: SIEMENS S7-1200 - Operation: pendant panel / wired remote control - Control: manual valve + electric control - Optional: 7" touchscreen - Optional: wireless remote control - Optional: up to 99 programs storable ==== Safety - Hydraulic overload protection - Electronic overload protection - End travel safety switches (top/bottom) - Safety PLC - CE-compliant design - Optional: safety edge on portal columns ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 11 kW - Total connected load: approx. 18 kW Fields of application: Straightening, tool and mold making, steel construction, heavy forming, maintenance, try-out, alignment work (Hydraulic press, hydraulic straightening press, portal press, portal straightening press, 300-ton press, 300 t press, H-frame press, heavy-duty press, industrial press, forming press, straightening system) ##### The images shown serve as samples and may deviate from the actual configuration.

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal Bedpjz A R Irefx Al Ajwu - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition