Used Homag Optimat Ch 03/32/32/E Plus for sale (78,523)

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Rcodpfsvwku Ujx Am Ted Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: good (used), Year of construction: 1996, for max. panel size of 320 cm length and 220 cm width or depth Rsdpfjy Nfdyex Am Tecd undismantled, located in Bad Berleburg

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw with Cut-Rite software optimization - Year of manufacture: 2002 Rcjdpfx Aex Ey Nvsm Tod - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 8275519 – with test protocol, expertly fully overhauled and tested, includes 3 months warranty, 100% functional, delivery scope as shown in the photos. Please note: In the exchange procedure, your defective part must not exhibit any mechanical damage such as breakages, as these are no longer repairable. In such cases, an additional invoice of €500 incl. VAT will be issued. Attention: You are bidding on a Heidenhain UV 130 inverter, ID: 324 998-03 SN: 8275519, on an exchange basis (exchange service), professionally overhauled and tested, with a 3-month warranty, 100% functional, and scope of delivery as per photos. In both repair and exchange procedures, your defective exchange component must be free of mechanical damage such as breakages, since these cannot be repaired. Otherwise, a subsequent charge of €500 incl. VAT will apply. Rcsdpjy Nrnfsfx Am Ted

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 8781155A – supplied with test report, professionally fully overhauled and tested, with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: Under the exchange procedure, your returned defective unit must not show any mechanical damage, such as cracks or breakage, as these are considered irreparable. In such cases, an additional charge of €500 incl. VAT will apply. You are bidding on a Heidenhain UV 130 Inverter (Exchange Service), overhauled and tested, with 3 months warranty, and delivery scope as depicted. In both repair and exchange procedures, any defective exchange part must be free from mechanical damage; otherwise, a subsequent invoice of €500 incl. VAT will be issued. Rodjy Nrnlspfx Am Tjcd

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally overhauled and fully tested, comes with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective part must not have any mechanical damage such as fractures, as these can no longer be repaired. In such cases, an additional invoice of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain (UM 113 ID 325 002-03 SN13307325) as an exchange (Exchange service), professionally overhauled and fully tested, with a 6-month warranty, 100% functional, and scope of delivery as shown in the photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage like breakage, as these cannot be repaired. In such a case, a follow-up invoice of €1,000 including VAT will be issued. Rodpfsx Etansx Am Tscd

Condition: ready for operation (used), Heidenhain control unit 269 661 ZY / X 9320 6772, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rodpfx Amji Eavte Tecd

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 13307325 – with test protocol, professionally and completely overhauled and tested, with 6 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not have any mechanical damage such as fractures, as these are irreparable. In such cases, a subsequent charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 113 ID 325 002-03 SN15341159 in exchange (exchange service), professionally and completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these cannot be repaired. In this case, a subsequent invoice of €1,000 including VAT will be issued. Rcsdpfx Aoy Nq U Rsm Tsd

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper AG 0303, unused in original packaging, 100% functional, scope of delivery as per photos Rcsdpox Eudhofx Am Tsd

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper HA 030135, unused in original packaging, 100% functional, scope of delivery as shown in photos. Rsdpfx Aox Eudnsm Tscd

Condition: ready for operation (used), Lenze EVD493--E / 00325332 inverter SN: 000040, used, in good condition, 100% functional, scope of delivery as per photos. Rjdpfx Amex Et Ewe Tecd

Condition: ready for operation (used), Heidenhain HR 332 electronic handwheel. 266 064-03 SN: 4 649 594. Crack in housing, used, normal signs of use, 100% functional, delivery as per photos. Redpfx Amsy Nqfio Tjcd

Condition: ready for operation (used), Heidenhain UM 113 Id.325 002-03 SN: 14934810 - with test report, professionally and completely overhauled and tested, includes a 6-month warranty, 100% functional, scope of delivery as per photos. Note: In the exchange procedure, your defective core unit must not have any mechanical damage such as cracks or breaks, as these cannot be repaired. In such cases, an additional charge of €1,000 incl. VAT will be invoiced. Attention: You are bidding on a Heidenhain UM 113 ID 325 002-03 SN14934810 inverter on an exchange basis (exchange service), professionally overhauled and tested with a 6-month warranty, 100% functional, scope of supply as shown in the photos. In both repair and exchange procedures, your defective part must be free from mechanical damage such as breakage, as these are not repairable. If such damage is present, a subsequent invoice of €1,000 incl. VAT will be issued. Rcedey Nq Uwepfx Am Tod

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 13939866B – including test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: In the exchange process, your defective exchange part must not exhibit any mechanical damages such as fractures, as these are beyond repair. In such cases, a subsequent charge of €500 incl. VAT will be applied. Attention: You are bidding on an inverter from Heidenhain UV 130 ID: 324 998-03 SN: 13939866B on an exchange basis (exchange service), professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage such as breakages, as these are no longer repairable. In this case, a surcharge of €500 incl. VAT will apply. Rodpjy Nrm Uofx Am Tecd

Condition: used, machine/vehicle number: 008516, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Rcodpfjzbrn Isx Am Tsd Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, mileage: 74,586 km, first registration: 07/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, emission class: euro4, number of seats: 2, Equipment: ABS, crane, Very well-maintained MAN TGL 8.180 fitted with a Cormach 23000 36-3 assembly crane featuring 3 hydraulic extensions, a working height of 32 meters, and a maximum lifting capacity of 1,200 kg. Includes ground control and radio remote control. The vehicle is additionally prepared for platform lift operation. German vehicle from first owner with only 74,500 km. • Cormach 23000 • 32 m – 1,200 kg at 4 m outreach • 30 m – 1,200 kg at 10 m outreach • 28 m – 860 kg at 12 m outreach • 27 m – 640 kg at 14 m outreach • 26 m – 500 kg at 17 m outreach • 23 m – 370 kg at 19 m outreach • 22 m – 270 kg at 21 m outreach • Winch from 2023 • Continuous slewing range • Radio remote control with engine START/STOP function • Work basket available at extra cost • Working height with work basket: 30 m • Side outreach: 21 m (270 kg) and 10 m (1,200 kg) • Differential lock • Self-propelled working machine • German vehicle • From first owner Financing available through our partner banks; we are happy to assist you. Rcsdpfsy Nhltox Am Tsd We expressly reserve the right to prior sale as this item is also listed on other platforms. Accessory information without guarantee. Subject to change, prior sale, or error. We strongly recommend and offer inspections and testing to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 Rsdjzkmrfspfx Am Tscd With loading system

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Maximum workpiece dimensions for processing: 2500 x 1300 mm Workable workpiece dimensions: 2500 x 1000 mm Rcodpfx Aezga E Dom Tjd 2 Panel clamping devices Infeed worktable (panel support) Outfeed table (with motorized belts) Software: woodWOP

Condition: ready for operation (used), Year of construction: 2002, number of axes: 4, This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. Rcjdox D Dvnopfx Am Tsd • Working area: 3000 x 1050 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WoodWop 7.1 (updated in 2018, cost approximately €9,500) Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, 11 kW power, HSK 63F mount 17 vertical drilling heads Horizontal drilling head with cross positioning + blade Milling and edge trimming unit 360° edge gluing unit Combined edging and scraping unit Edge banding magazine with 2 stations Circular magazine with 12 stations Control system: Power Control PC 85 Work table with 8 rails and vacuum cups Elmo Rietschle vacuum pump Safety mats Chip conveyor Includes 4 aggregates (edge trimming blade, edger, combined edge scraper/edger, horizontal 4-spindle drilling unit) and vacuum cups. Only approximately 4,100 operating hours. Rsdpfx Amsyprr Nj Tocd Machine in excellent condition Available immediately

Condition: new, Year of construction: 2025, ∗JCB 403 Plus New Machine∗ - JCB Diesel by Kohler [36kW/49HP] - No AdBlue required - Lift height: 2.77m - Rated load capacity: 1,800kg - Hydrostatic drive - 20km/h - Comfort cab (ROPS/FOPS) - Hydraulic quick coupler, Weidemann type - Auxiliary hydraulics - Roof protection grille - Adjustable steering wheel - Full-opening doors - Heating - Additional rear weight 123kg - Servo single-lever control - LED work lights front/rear - Yellow beacon - Exterior mirrors right/left - Grease gun - Right armrest - Forks and bucket available Immediately ready for use, many other attachments in stock. A viewing appointment is expressly requested. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel.) will be happy to assist you. More information is available on our homepage. Errors and prior sale excepted! Quick coupler system, road approval = More information = Rsdpfxoyfr I Ns Am Tjcd Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm Rsdpfx Amsyghwco Tjcd MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: used, Year of construction: 2007, operating hours: 39,359 h, functionality: fully functional, machine/vehicle number: 0-201-04-0605, Description of the Main Equipment: Redpfx Amoyucyze Tscd Clamping table with matrix aluminium construction Vacuum system prepared for 1000 m³/h nesting technology Power Control control panel with PC85 Main spindle 15 kW with vibration sensor C-axis with aggregate interface Interface for FLEX-5 aggregate Plate-type tool changer with 10 positions Drilling unit: 13 spindles – 9 vertical and 2+2 horizontal spindles Software package for office computer WoodWOP Tools software Maximum positioning speed: 80 m/min in X and Y directions (vector speed: X/Y = 113 m/min) / 30 m/min in Z direction

Condition: good (used), CNC-drilling and dowel insertion machine HOMAG WEEKE MOD ABD050 OPTIMAT for horizontal drilling/drilling and doweling. The machine can be used as a stand-alone machine or in connection with CNC-machining center. Realization: - ABD 050/12 Technical data - workpiece length - ABD 050/12: 20 - 1,250 mm - workpiece width: 50 - 800 mm - workpiece thickness: 10 - 60 mm Equipment features - high-speed dowel and spindle drilling aggregate - vibrating conveyor for automatic dowel loading of standard dowels (8 x 30/35 mm) - lateral anchoring and central stop pneumatically lowerable - manually adjustable tensioning cylinder in length and thickness for workpiece clamping - ABD 050/12: 4 tensioning cylinder Rcjdpfx Ajrlngkjm Tod - glue - low pressure pump - space occupation for up to 4 workpieces

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Rcsdjx Ey H Ispfx Am Tjd