Used Homag Optimat Kar 310/5/A20/S2 for sale (63,344)

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm Dwodpezap H Sefx Al Soc MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: ready for operation (used), machine/vehicle number: 0-200-03-8334, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 24 m/min, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Dedpfx Aeydiymsl Sjwc Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Year of manufacture: 2007 Voltage: 400 V Power consumption: 46 A Fuse: 63 A Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Dwedpfx Asy Akytol Ssc Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for 1st, 3rd, 4th, 5th, 7th, and 8th unit) Tools included: No (for 6th unit)

Condition: used, Year of construction: 2008, This HOMAG single-sided edge banding machine, type: Optimat KAL210/6/A20/S2, is being auctioned online as part of our industrial auction / machinery auction for woodworking machines - edge banding machine - destacking system - vacuum press - veneer shear - membrane press. Dwedpfx Alez Ndxye Sec You can find this and many other items on our platform.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, controller model: POWER CONTROL PC22, rotational speed (max.): 12,000 rpm, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Glue Application Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Rough top and bottom flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Djdpfxoyqx U He Al Sswc Edge Processing Unit 4 Milling unit for rough machining: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Wide belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Year of manufacture: 2009 Technical data Note: Dwsdpezuyhuefx Al Soc The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, Weight: 4.000 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit Dedpfx Aoyzp Akel Sswc - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: No - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 004592, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 24 m/min Maximum panel thickness: 60 mm Dedpfswcmxljx Al Sjwc Operating Units: 8 nr

Condition: used, Year of construction: 2002, functionality: fully functional, LIGMATECH ZHR 15 Transfer Unit / Roller Conveyor (Workpiece Return Conveyor / Boomerang) – will be sold separately from the edgebanding machine. HOMAG Optimat KL79 A20/S2 (2002) Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) Dsdeycg D Tspfx Al Sewc • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 0-200-95-6633, functionality: fully functional, input voltage: 400 V, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Number of units: 6 1. Unit: Pre-milling unit Manufacturer: Nordson Tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers Tools available 4. Unit: Rough milling unit Dwsdpfez Eazyox Al Soc 5. Unit: Cutting unit 6. Unit: Fine milling unit MACHINE DETAILS Voltage: 400 V Current consumption: 41 A Fuse rating: 50 A Transport packages: 5 Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Unladen weight: 3,500 kg EQUIPMENT Nordson unit, year of manufacture 2017 CE marking

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Grinding group Lamps to heat the edge of the panel 6-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Dwodpfsgiyn Iex Al Ssc Free space for the possible insertion of another work group Edge scraper group Oscillating brush group

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. Dwedpfx Alsyfw Sye Sec A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Technical configuration of the machine: - Pre-milling unit - Material pre-heating - Automatic EVA glue application - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Djdpfx Aljzux R Ij Sswc Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Dsdpfx Alez Ekbke Sowc Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 80 Edges thickness in stips / lippings (min/max) mm 0,4 / 20 Numerical Control NC21 Feeding speed m/min 18 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (Hot Melt Glue + Quick Melt system) A20 + A34 Band Pressure zone "C" Edge coils supporting unit (No. 1 reel) Snipping (end-cutting) WK 14 (KW 0.8x2 motors at RPM 12000), pneum. adjust. chamfer/straight Dwedpsl Iz Tuefx Al Sjc Rough Trimming unit Optimat (2 x Kw 1,5) Fine Trimming unit MF20 (2 x kw 0,55) Corners Rounding (contour trimming) Unit FF12 (4 x Kw 0,4) CNC (WD40) Free space for Profile Scraping unit Finish processing unit ( Glue scraper + Buffing unit) FA 10

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Dwjdpfeyyvp Ujx Al Soc Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140 Dwjdsz E A T Eepfx Al Sjc

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit Dedpjzdzmkjfx Al Sswc 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request. Dedpfx Alszv S Snj Sowc

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 Dodpfjyrp Uajx Al Sewc - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Dwjdpfx Aezmrw Ssl Ssc Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 4 nr Dodpfx Aljz Nfb Ij Sjwc

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Dedezq Ab Nspfx Al Sewc Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: excellent (used), A) SINGLE SIDE EDGE BANDER (Left) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 20 Panels thickness (min/max) mm 8 - 60 Numerical Control POWER Control PC 22 Spraying unit (Antisticking liquid) Infeed fence, adjustable by N.C. Panels infeed system Pre-milling Unit (vertical joint trimmers) adjustable by N.C. type KAL 300 (Kw 3 x 2) Glueing Unit (P.U.R. Glue + Quick Melt unit) PU 34 / QA 34 Band Pressure zone (adjustable by N.C.) "C" Edge coils supporting unit, N° 6 reels Snipping (endcutting) unit HL 86 Servo (Kw 0,4 x 2) 35 m/min Rough Trimming unit Optimat (Kw 1,5 x 2) Fine Trimming unit ALUKANTE (Kw 0,4 x 2) adjustable by N.C. Dwodpfxjzx Eh Ie Al Soc Spraying Unit (for sliding liquid) Multi Function Unit (Profile contour Trimming unit) FK 13 Servo (Kw 0,4 x 2) Profile edge scraping unit (Multiprofile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid) B) Workpieces Return system "LIGMATECH" ZHR 05/L/095

Condition: used, machine/vehicle number: 006432, Type of edging: Thin edge, Thick edge Dsdpfet Hmq Hjx Al Sewc Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr