Used Ibex Nmog 532 for sale (198)

Condition: used, Rotary lobe pump Hodpfx Ajyhhq Sondjnu

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Hsdpfx Ansz Agw Eodonu - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Year of construction: 2017, turning height: 1,600 mm, workpiece weight (max.): 16,000 kg, Videos of the machine in operation can be provided upon request. Max. turning diameter: 3200 mm Table diameter: 2800 mm Max. turning height: 1600 mm Max. workpiece weight: 16,000 kg Table speed range: 70 rpm Number of table speed ranges: constant Hnedpfx Asyrflzjndsu Vertical movement in the Z-axis (ram stroke): 1100 mm Horizontal slide travel in the X-axis: 1720 mm Working feed rate range: 2 - 2000 mm/min Rapid traverse in the X/Z axis: 7 m/min Crossrail traverse: 360 mm/min Main motor power: 55 kW Installed power: 69 kW Dimensions: 5500 x 6540 x 4900 mm Weight: 43,000 kg

Condition: excellent (used), color: other, first registration: 01/2022, Year of construction: 2022, operating hours: 234 h, Offered: JEKKO SPX 532 CL fully electric from 2022!! In addition to the options already mentioned, it features: -Winch 800 kg (80 meters) - Hoisting block 4t -Extra hydraulic functions -Hydraulic extendable jib (1000kg) -Short hand jib 1250kg -Extendable tracks -Main mast quick coupler etc etc Dutch machines available immediately! Hnjdpfoz Dgh Dox Andsu = More information = CE mark: yes Technical condition: very good Visual appearance: very good = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Hnedpfx Asz Rmg Uondsu Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Hodsz S Nqfspfx Andjnu Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, total length: 2,600 mm, table width: 260 mm, table length: 800 mm, type of input current: three-phase, overall weight: 2,600 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, CNC MACHINING CENTER 532 Metal Technics Polska MTP CNC 532 SPECIAL OFFER - 5% DISCOUNT Original price: €17,936 net EXW Discount: €896.80 SPECIAL PRICE: €17,039 NET EXW Year: 2026 Condition: New, fully functional Location: Sokołów Podlaski, Poland DESCRIPTION The MTP CNC 532 is a compact and precise vertical CNC machining center designed for milling, drilling and tapping of steel, aluminium, non-ferrous metals and engineering plastics. The machine features professional SIEMENS SINUMERIK 808 Advanced control, SIEMENS servo drives, precision linear guideways and ball screws. Its rigid construction provides excellent stability, accuracy and repeatability, making it suitable for CNC workshops, tool rooms, prototype production and small-to-medium series manufacturing. A fully enclosed working area protects the operator from chips and coolant, while the automatic lubrication system reduces maintenance requirements. TECHNICAL SPECIFICATIONS • Table: 800 x 260 mm • Spindle taper: BT30 (BT40 optional) • X/Y/Z travel: 500 / 320 / 420 mm • Spindle-to-table distance: 90-470 mm • Maximum spindle speed: 8000 rpm • Tool magazine: 10 positions Hjdpfx Ansy Ht Axodenu • Rapid traverse X/Y/Z: 10 / 10 / 8 m/min • Working feed: 2.6-2500 mm/min • Servo torque X/Y/Z: 6 / 6 / 7.7 Nm • Positioning accuracy: +/- 0.02 mm • Repeatability: +/- 0.01 mm • Main motor: 3.7 kW • CNC control: SIEMENS SINUMERIK 808 Advanced • Servo drives: SIEMENS • Power supply: 400 V, three-phase • Dimensions: 2600 x 1950 x 2530 mm • Weight: 2600 kg STANDARD EQUIPMENT • SIEMENS SINUMERIK 808 Advanced CNC • SIEMENS servo drives • 8000 rpm spindle • 10-position automatic tool magazine • Fully enclosed working chamber • Precision linear guideways and ball screws • Automatic lubrication system • Pneumatic system • LED working-area lighting • 3-color status/alarm lamp • CE Declaration of Conformity • Technical and operating documentation APPLICATIONS Ideal for precision milling, drilling and tapping, prototype production, tool rooms, CNC workshops and serial manufacturing. TRANSPORT, WARRANTY & SERVICE Professional transport is available throughout Europe, with costs calculated individually according to destination. Free collection from our warehouse in Sokołów Podlaski is also available. The machine is supplied with a 12-month warranty, warranty service and spare-parts support. Post-warranty servicing and spare parts are also available. SPECIAL PRICE Original price: €17,936 net EXW 5% discount: -€896.80 SPECIAL PRICE: €17,039 NET EXW VAT applies where legally required. Metal Technics Polska Fabryczna 1, 08-300 Sokołów Podlaski, Poland Contact us for availability, transport quotation, additional photos, videos or an individual commercial offer.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) Hjdpeyrg Ahsfx Andonu • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: used, mileage: 1,001 km, first registration: 01/1999, empty load weight: 130 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 1999, Equipment: crane, Vehicle location: Bovenden Includes Atlas swivel head! Hjdpfezyvd Njx Andsnu Construction width approx. 450mm! Capacity approx. 90 liters. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: good (used), Ibex Pump Lobe pump Model: SR/4 Serial: 930590/01 Hnjdpfx Aef Ecr Sjndeu Stainless lobe pump on frame, 50mm inlet and outlet pipe, 3Kw motor, 3Ph

Condition: ready for operation (used), Year of construction: 2017, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2017 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Hjdpfez Imlqsx Andenu Video available upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 160 mm, About Us Since 2014, we have been developing and producing our machines in Austria as a machine manufacturer. In addition to our standard machines, which can be individually customized, we are also able to offer special solutions. We will gladly send you our product catalog; simply contact us. Further information can be found at amt – machinetools . com Hedpfsz N Alkex Andenu Machine Frame ECO 532C CLEARANCE SALE – while supplies last Due to the further development of our machine series and the transition to the HSC 544, the remaining ECO 532 machine frames are being offered at an attractive clearance price. Travel range X 470mm (710mm with portal extension for tool changer) Y 330mm Z 160mm (longer travel range available upon request) Machine bed made of mineral cast - high rigidity - high vibration damping - high thermal stability - compact dimensions with a depth of approximately 660mm, allowing it to pass through very narrow doors during installation - weight approximately 400kg Guides and drive - Linear guides, size 20, on all axes - Ball screws with a diameter of 25mm on the X axis, diameter 20mm on the Y and Z axes Scope of delivery Machine frame including portal extension, fully assembled and calibrated. Includes: - Linear guides, ball screws and bearing units - Machine table - Z axis and cross plate The pictures show some optional accessories that are not included in the scope of delivery. For example, spindle, motors, guide rail covers, tool changer, cabin, etc. Numerous options and extensions are available. We will be happy to provide you with expert and comprehensive advice to offer you the perfect solution for your machining task. The offer does not include VAT. Delivery time and payment terms are subject to agreement.

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. The housing is designed to be robust and chemical-resistant for tough lab environments. Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Hnedpfoxrt N Hsx Andju Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. Hnedpfxsx Sygho Andou It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: good (used), Year of construction: 2014, operating hours: 5,532 h, fuel type: diesel, GENIE S-45 Telescopic boom lift / articulating boom lift, 4x4, DEUTZ DIESEL, 5532 hours, 15.7m working height, 2014. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on-site. Hnedezxq R Iepfx Andou Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 320 t, working range: 4,100 mm, Used High Quality, Fully serviced, Very Clean Trumpf 5320 series 5000 320ton x 4metre cnc pressbrake Very modern Trumpf TruBend B03 320/4100 6 axis 4 metre x 320 ton CNC down stroke hydraulic pressbrake for sale Trumpf – fully serviced with Trumpf uk Model: Xpert 320/4100 Working length 4100mm Max. press force 3200kn / 320ton Max stroke 445mm 320/4100 free standing CNC Pressbrake 6axis / 6 axes: Y1 – Y2 – Z1 – Z2 – X – R Year 2016 Hnodpfxjv Hrrgo Andsu Complete with; i axis 4 axis back gauge Crowning No pit required Ideal for heavy duty steel fabrication, bending thick steel plate

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Hnsdpfxozd Ut Ro Andsu Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: new, SIG Positec / Berger Lahr TLC 532 F servo drive SN:1110070929, unused in opened original packaging, 100% functional, delivery as per photos Hnjdpfxez Acx Ss Andsu

Condition: used, lifting height: 17,300 mm, Year of construction: 2021, operating hours: 461 h, Empty weight: 2.820 kg Lifting capacity: 3.200 kg Dimensions of cargo space: 351 x 77 x 196 cm Delivery terms: EXW Production country: IT Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Jekko SPX 532 CL2 * 2021 * Lithium battery drive * 461 operating hours * 17.3 meters working height * 14.8 meters horizontal reach * 3200 kg lifting capacity * Remote Control * Automatic outrigger * Jib 1000.2HL.1MX * Jib 1200GX Hnsdpfxszncfps Andsu * Total weight 2820 kg * Including documents

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. - Control via LCD touch panel - Heavy-duty chain feed conveyor - Automatic thin edge feeding from magazine Hnodeu T Nhmepfx Andju - Solid edge magazine - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Equipment: • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Technical data: • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm Hjdpfx Aszgcifsndenu • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power Technical Condition Information The machine is currently still in occasional use in our production facility and remains operational. However, we believe in complete transparency and would like to point out that the CNC control software occasionally freezes. Therefore, the machine should be considered as potentially requiring troubleshooting or repairs. For this reason, we believe it is best suited for buyers with experience in servicing CNC machine tools, maintenance companies, or businesses looking for a valuable source of spare parts. This technical condition is also reflected in the attractive asking price. The machine is sold as is, in its current condition. We strongly encourage all interested buyers to inspect the machine personally and see it operating in our facility before making a purchase. We will be happy to demonstrate its operation and answer any questions. The machine is being sold not because it has reached the end of its useful life, but because we are upgrading our production equipment and purchasing a new machining center.

Condition: new, machine/vehicle number: CAT00C15LGB904528, fuel type: diesel, motor manufacturer: Caterpillar C1.5, General information Year of manufacture: 2024 Field of application: Construction Weights Empty weight: 532 kg Functional Generator capacity: 13 kVA Dimensions of cargo space: 176 x 94 x 123 cm CE mark: yes Other information Fuel consumption: 3.0 Liter / Hour at 75% Load Generator: Caterpillar M1413L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Hsdpfownwdvsx Andonu Water tank volume: 55 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 1982, machine/vehicle number: 532, Track width: 2.6 m Crane type: ASX I (retrofitted) Reach: 13.0 m Lifting capacity without grab: 1,250 kg / 13.0 m Grab: included Crane arrangement: in front of the cab Hnedpfx Aneig H Rwodsu Cab side: right Saw: 1.3 m Alpha Measurement: Counter

Condition: used, mileage: 73,648 km, power: 140 kW (190.35 HP), first registration: 09/2018, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,828 mm, loading space width: 2,425 mm, loading space height: 532 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Buy online. Finance digitally. Have it delivered nationwide. Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: 3679 Your advantages with us: Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle – whether old or new Optionally available: 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German technical inspection and emissions test) * Nationwide delivery * Rear-view camera can be retrofitted on request Vehicle highlights: * Original Meiller three-way tipper * Only 73,648 km mileage * MAN TGL 8.190 – 4.6 L diesel with 140 kW (190 hp) * Permissible total weight 7,490 kg * Fixed trailer coupling (ball head) * Parking heater Hsdpfx Aoz Sizrjndjnu * Air-suspended driver's seat * Tilting control via joystick from the cab * 2 revolving beacons * Euro 6 – green emissions sticker * 3 seats Tipper body (approximate dimensions): Length 3,828 mm x Width 2,425 mm x Side board height 532 mm Equipment overview: Body: Meiller three-way tipper * Tilting to the left, right, and rear * Tilting control via joystick in the cab * Fixed trailer coupling (ball head) * 2 revolving beacons Comfort: Parking heater * Air-suspended driver's seat * Double passenger seat * Radio with display * Central locking * Power steering Safety: ABS & ESP * Immobilizer Technology: MAN TGL 8.190 – 4.6 L diesel, 140 kW (190 hp) * Manual transmission * Rear-wheel drive * Euro 6, particulate filter, green emissions sticker * Permissible total weight 7,490 kg * Paint: White * First registration 09/2018 Do you want to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Telephone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos, and prior sale are reserved. The photos are AI-edited and serve only as an example to illustrate the size and equipment of the vehicle. The definitive condition of the vehicle is determined exclusively by the purchase contract on site or by written assurances.

Condition: used, mileage: 73,648 km, power: 140 kW (190.35 HP), first registration: 09/2018, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,828 mm, loading space width: 2,425 mm, loading space height: 532 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Buy online. Finance digitally. Have it delivered nationwide. Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: 3679 Your advantages with us: Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle – whether old or new Hnedez Sizfepfx Andeu Optionally available: 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German technical inspection and emissions test) * Nationwide delivery * Rear-view camera can be retrofitted on request Vehicle highlights: * Original Meiller three-way tipper * Only 73,648 km mileage * MAN TGL 8.190 – 4.6 L diesel with 140 kW (190 hp) * Permissible total weight 7,490 kg * Fixed trailer coupling (ball head) * Parking heater * Air-suspended driver's seat * Tilting control via joystick from the cab * 2 revolving beacons * Euro 6 – green emissions sticker * 3 seats Tipper body (approximate dimensions): Length 3,828 mm x Width 2,425 mm x Side board height 532 mm Equipment overview: Body: Meiller three-way tipper * Tilting to the left, right, and rear * Tilting control via joystick in the cab * Fixed trailer coupling (ball head) * 2 revolving beacons Comfort: Parking heater * Air-suspended driver's seat * Double passenger seat * Radio with display * Central locking * Power steering Safety: ABS & ESP * Immobilizer Technology: MAN TGL 8.190 – 4.6 L diesel, 140 kW (190 hp) * Manual transmission * Rear-wheel drive * Euro 6, particulate filter, green emissions sticker * Permissible total weight 7,490 kg * Paint: White * First registration 09/2018 Do you want to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Telephone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos, and prior sale are reserved. The photos are AI-edited and serve only as an example to illustrate the size and equipment of the vehicle. The definitive condition of the vehicle is determined exclusively by the purchase contract on site or by written assurances.