Used Ifö Power Resistance for sale (39,160)

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor Pgodjfg I D Hspfx Am Tjp -Frizlen power resistor: GWADU 216x120-20 -Resistance: 300 W 20 ohms -Dimensions: 240/140/60 mm -Weight: 3 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor Pjdpepvqzasfx Am Tjgp -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor Pgedjgqg H Hepfx Am Tsp -Type: Test voltage 2.5 kV/34 Ohm/1.3-1,8 A -Number: 2x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor Pjdpfx Asfmlduem Tsgp -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 -Power: 450 W 4.0 ohms -Dimensions: 250/140/100 mm -Weight: 1.7 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor Pgedpfx Aegqg H Asm Tjp -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3 A -Number: 4x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm Pjdpfx Amegqg H Ro Tegp -Weight: 0.4 kg

Condition: good (used), Power resistor, wire potentiometer, resistor, braking resistor, tube resistor -Manufacturer: Frizlen, power resistor -Type: RZM10-4.7/1K Podpopvqykjfx Am Togp -Voltage: 220 V / 50 Hz -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, power: 80 kW (108.77 HP), total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated power: 100 kVA Continuous power: 80 kW Maximum speed: 1,500 rpm Noise level: < 68 dB Engine manufacturer: Yunnei MACHINE DETAILS Controller: Deep Sea DSE7320 Cooling type: Water Fuel: Diesel Battery voltage: 24 V Output voltage: 230 / 400 V Output current: 144 A Output frequency: 50 Hz Type of output current: AC / Three-phase Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,150 x 1,600 mm Net weight: 1,550 kg EQUIPMENT AVR ATS Remote control Water and oil heater Fuses Pgodszi D Riopfx Am Tep Euro/CEE/Powerlock sockets Cover The operating hours can be found in the last image.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Pgedpezncm Hefx Am Tjp Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Psdpezl D Exefx Am Tegp Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t Pjdpfx Amszlic Ne Tsgp 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) Pjdpfezimcbjx Am Togp (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A Pgsdpfx Aszimamom Tsp - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2016, Lifting capacity: 150 kg Pgjdpfx Amezm E Auo Top Please contact Gebrauchtgeräte Center for more information

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 Pjdpfowkqmiex Am Tsgp -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Condition: used, Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg Pedpfxjd Tn Dcs Am Tegp

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available Pjdpodqm Epofx Am Tsgp -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm Pgedpfswt Rzlox Am Top -Weight: 3.8 kg/piece

Condition: good (used), CNC control, control rack, electronic module Pgedpjwt R Irefx Am Top -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Condition: good (used), Converter module Pgedpfx Amob A Hv Se Top -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg

Condition: good (used), Year of construction: 2008, CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control -Type: PA8000 LW Pgjdpjwubtnjfx Am Tjp -Dimensions: 330/250/H130 mm -Weight: 5.9 kg

Condition: used, Year of construction: 2019, Lifting capacity: 150 kg Please contact Gebrauchtgeräte Center for more information Podpfx Amjzpdrao Tjgp

Condition: new, Year of construction: 2023, Laser source: Raycus 3 to 6kW Laser head: Raytools autofocus Structure: 2 horizontal chucks Loading: 6.5m unloading 2.5m Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-230mm Tube profiles: round, rectangular, square Pedpfx Asnkailsm Togp Options: - 3 D swivel head - Automatic bundle loader - Table loader - Conveyor unloader - Weld seam detection - Raybox - Extraction system

Condition: new, Year of construction: 2024, Basic configuration Laser source: Raycus Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Loading: manual Psdpfx Amomx R S No Tegp Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Smoke extractor: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm tube length: 0-4000/0-6000mm Maschinengröße: 13500x3400x2400mm

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Pjdpfxjci Ik Sj Am Tsgp Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.