Used Illig Thermo Forming Machine for sale (66,645)

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Dodoq A Um Rjpfx Apwsut Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Dedpfx Ashbu E Hjpwsut Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Djdpfx Aon D Ew Iopwjut Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Dsdeq Nn Hcjpfx Apwout The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 2006, condition: repair required (used), Repak thermoformer, type: RE 25, machine number: 2500020, year of manufacture: 2006, 220/240 V, 3 Ph, 50 Hz, 12 kW, 30 A, die: (12x) 85 mm x 110 m. Spare parts for sale. Picture 1. Controller, electronic components, tools, vacuum pump, frame parts, etc. Comes with tools of various sizes. Sold in the condition shown in the photo. Complete forming parts set €4000. See picture 2. Flender motor ZF48-M100LB4, €250, picture 3. Busch vacuum pump Wv1000B-001 KDFC, €1200, picture 4. Automatic double-line label printer and spreader, complete, €1500, picture 5. Rotary cutter for hard foil, €500, picture 6. Outfeed conveyor, €300, picture 8. Dodeu Hz Tdopfx Apwsut Selling as a bundle for €2000, as is. Complete die set €2000. HMI and electronic components. Other parts.

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Duodjunia Hepfx Apwjt

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Dodsxghngjpfx Apwsut Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Dodpfxeyzxgfe Apwjut Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN Dsdpfor D N Eqjx Apwjut 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Dodpfoyx Na Rjx Apwjut

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Dedsylbz Sopfx Apwsut

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN Dsdpfjxya Hzjx Apwout GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, input voltage: 230 V, type of input current: AC, input frequency: 50 Hz, DGUV certified until: 05/2027, White Electric Spritz Pastry Device Spritz pastry machine, electrically operated Model: ESFG with wall mounting bracket DGUV V3 tested Stepless adjustment Connection 230V, ready to plug in Used machine Option: Quark balls Djdpfoy H Ur Ujx Apweut Spritz pastries Ring doughnuts / Donuts

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Dodpfx Apeywpbljwout

Condition: good (used), functionality: fully functional, total length: 400 mm, total width: 430 mm, total height: 380 mm, overall weight: 35 kg, type of input current: AC, input voltage: 230 V, warranty duration: 3 months, year of last overhaul: 2024, product length (max.): 75 mm, power: 3.2 kW (4.35 HP), product length (min.): 75 mm, working width: 430 mm, DGUV certified until: 05/2027, Varioback Appliance for 13 Tartlets Stainless steel countertop appliance Temperature adjustable up to 300°C Adjustable baking time Tartlet diameter: 75 mm Power connection: 230V, 3.2 kW, ready to plug in Duedpfet U U D Rex Apwjt Countertop appliance dimensions: 430 x 400 x 380 mm (W x D x H) Used device, cleaned Many more baking appliances in stock!

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling. Dodpfx Ajx Utd Eopweut

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total width: 700 mm, total height: 1,135 mm, type of input current: AC, input voltage: 230 V, warranty duration: 12 months, power: 2 kW (2.72 HP), DGUV certified until: 05/2028, Universal Dosing Machine Model: U-Max Dosing with time and speed control Stainless steel construction High quality! Various accessories available Suitable for a wide range of fillings such as pralines, jams, confectionery creams, honey, yogurt, creamy butter of plant and animal origin, fresh cheese masses, whipped cream, and even masses with cut foods (herbs, nuts, olives, etc.), etc. Dosing gun with hose Duedpfew S Sm Sjx Apwot Includes a set of 12 nozzles, single needle, flat nozzle 180-190 mm Connection: 230V Dimensions: 700 x 870 x 1130 mm (W x D x H) New device With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Double needle Flat nozzle in special sizes Foot control LCD display Dosing programs Custom fabrication Maintenance contract Service package Delivery service Commissioning & training Visit our large machinery showroom!

Condition: used, - Dimensions: 1100x900x1330 mm - Serial No.: 9624893 - Year: 2006 Dsdpewxym Iofx Apwout - Plate: 400x600 - Control panel with keypad - Brand: BRAVO - Model: QUIKLY - Voltage: 220 V - Weight: 240 kg - Power: 1.5 kW

Condition: used, -Total length: approx. 3,500 mm -Conveyor belt width: 650 mm -Output: 4,000 to 5,000 croissants per hour, depending on piece weight (30–40 g per piece) -Maximum dough thickness: 15 mm Dodpfxowxyk Te Apwjut -Belt speed: adjustable between 30 and 150 mm/s -Serial number: A-5487 -Electrical power: 1.7 kW -Voltage: 400 V / 50 Hz -Year of manufacture: 2006

Condition: ready for operation (used), Year of construction: 2010, A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible. Dodpfxsy Hvrvj Apwsut

Condition: good (used), functionality: fully functional, total length: 690 mm, total width: 1,380 mm, total height: 1,620 mm, overall weight: 540 kg, type of input current: three-phase, input voltage: 400 V, power: 1 kW (1.36 HP), funnel diameter: 380 mm, DGUV certified until: 05/2027, ambient temperature (max.): 40 °C, Rheon Model KN100 Cornucopia Encruster Maximum output approx. 60 pieces per minute, depending on product. Weight range from 10 to 90 grams. Large stainless steel feed hoppers Dujdpfjrhvu Ajx Apwst Each equipped with (2) feed screws Wide discharge conveyor Digital touch control. Compact forming, filling, and portioning machine Machine is mobile Connection: 400V, 16A-CEE plug Used machine Delivery service More bakery machines in stock!

Condition: good (used), functionality: fully functional, total length: 400 mm, total width: 430 mm, total height: 380 mm, overall weight: 49 kg, type of input current: AC, input voltage: 230 V, year of last overhaul: 2024, product length (max.): 75 mm, power: 3 kW (4.08 HP), product length (min.): 75 mm, working width: 400 mm, DGUV certified until: 05/2027, ambient temperature (min.): 20 °C, ambient temperature (max.): 40 °C, TOP Varioback unit for 13 tartlets. Stainless steel countertop appliance. Temperature adjustable up to 300°C. +++ Robust technology +++. Connection: 230V. Dimensions: 430 x 400 x 380 mm (W x D x H). Used device. More bakery machines in stock! Dusdpfx Apouat Abowst

Condition: used, Year of construction: 2007, operating hours: 27,953 h, machine/vehicle number: 6915, spindle speed (min.): 10 rpm, spindle speed (max.): 600 rpm, controller manufacturer: Siemens, tool diameter: 600 mm, Denn RL-600 CNC Machine Data Designation: Denn RL-600 CNC Installation Dimensions: approx. 1400 × 5000 × 3500 mm Operating Hours: 27,953 hours Workpiece Data Max. Workpiece Diameter: 600 mm Min. Workpiece Diameter: 100 mm Centre Distance: 5,300 mm Dujdpfx Apey E Hgzswet Performance Data Main Spindle Speed: 10–600 rpm Max. Feed Rate: 5 m/min Control / Technology CNC Control: Siemens Sinumerik HMI: PC-based control panel USB Port: for backing up the machine program CAD/CAM Interface: DXF (AutoCAD 2002 LT)

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 99331, total width: 2,500 mm, total length: 2,840 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a high-quality flow pack machine for the efficient packaging of a wide variety of products. The system is in very good used condition, fully operational, and immediately ready for use. The machine is equipped with a Videojet printer, model 6210. In addition to the machine, the scope of supply includes a separately driven rotary table with a diameter of 1500 mm as well as a conveyor belt with a passage width of 275 mm leading to the rotary table. Furthermore, wrapping film is included in the offer. The specifications and quantities are as follows: AVBE 70 µ, 480 mm Core: standard Pallets: 2 Dujdpev Nakpjfx Apwst Total quantity: 16,800 Im, 25,600 Um, weight approx. 871 kg

Condition: ready for operation (used), Year of construction: 1991, A vertical bag packaging machine Aquarius is available. Bag width range: 80mm-250mm, max. bag length: 450mm, packaging capacity: approx. 140bags/min, bag material: film, packaging product: bulk goods/piece goods. An on-site inspection is possible. Duodpfx Aey Equgjpwet