Used Illig Ua 100 4G Solo/ Be for sale (29,242)

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans Iodpfowf Dvasx Aixoaw - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling Iaedpfxotv Ivzj Aixew maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table Iajdpfoft S Eaex Aixew > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade Iodpfx Aiexlzqfsxsaw - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system Isdpexlzrcofx Aixeaw - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Iaodpfx Aet Iracsixjw Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Condition: reconditioned (used), > Top heating with small individual heaters controlled by toggle switches > Bottom heating with large heater > Top clamping system Iaodpfofug Anox Aixew > Protective grille > 4 cooling fans D05 > Pre-blowing and demolding automation

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] Iodsu E U Tbepfx Aixsaw - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: ready for operation (used), Table size: 900 x 500 x 550 mm height Iodpfx Aijx Ebh Rjxeaw Electrical connection: 380 V Required space: 1050 x 1050 x 1800 mm height Weight: 180 kg

Condition: ready for operation (used), Siemens SIMOTICS 1FT7084-5AC74-1NH0 synchronous motor SN: YFN1629189601004 - Encoder IC2048S/R I24 / Brake 24 VDC 24W 48Nm, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as shown in the photos Ijdpszmlyaefx Aixsaw

Condition: ready for operation (used), ABB 05GV20 f-E AXODYN servo drive, serial number: GN6100673/004. The servo drive has been completely overhauled by ABB, is used, and shows normal signs of wear. It is 100% functional. Scope of delivery as shown in the photos. Isdpji D Tq Rofx Aixeaw

Condition: ready for operation (used), Stöber Antriebstechnik P521SPD0100ME 110/130/24 gearbox SN: 1770700, used, in good condition, 100% functional, scope of delivery as per photos. Iodpfx Aijy Srqxjxjaw

Condition: ready for operation (used), Stöber Antriebstechnik P521SPD0100ME 110/130/24 gearbox SN: 1770704, used, in good condition, 100% fully operational, scope of delivery as per photos. Isdpfxsy Srris Aixoaw

Condition: ready for operation (used), Siemens 1FT6064-1AF71-3EG1 synchronous servomotor SN: YFS729616201004, encoder A-20248, professionally fully overhauled and tested, 100% functional, scope of delivery as per photos. Iaedpfxjx Duplj Aixow

Condition: ready for operation (used), Stöber Antriebstechnik P521SPD0100ME 110/130/24 gearbox SN: 1770699, used, in good condition, 100% functional, scope of delivery as per photos. Iajdpey Srqrsfx Aixew

Condition: ready for operation (used), Stöber Antriebstechnik P521SPD0100ME 110/130/24 gearbox SN: 1770703, used, in good preserved condition, 100% functional, scope of delivery as per photos. Isdpfx Aey Srrceixjaw

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm 3 holes per connector Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 1x set of fastening material consisting of: Ijdpfx Aijibzftsxjaw 06x screws M10 06x nuts 06x washers

Condition: excellent (used), Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the pallet racking crossbeam: Racking system: Redirack The scope of delivery includes: Iaedpfx Aijh S H N Uexew 01x Pallet racking crossbeam, used Material color: yellow U-profile: 100 x 50 mm Design: Head crossbeam Clear width: 2,707 mm 02x Locking pins, used Design: Fully galvanized For securing the longitudinal beams To prevent unintentional lifting General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 1x used pallet rack beam Material color: orange IPE profile: 100 x 55 mm Bracket: 5 holes Clear width: approx. 2,700 mm Per bracket: 5 holes Hole spacing: approx. 50 mm Hole diameter: approx. 11 mm 1x set of fastening materials consisting of: 10x M10 screws 10x nuts Iajdpfxsibzgxo Aixew 10x washers

Condition: excellent (used), Year of construction: 2015, operating hours: 775 h, functionality: fully functional, working width: 1,000 mm, area performance: 6,000 m²/h, warranty duration: 12 months, tank capacity: 250 l, total height: 1,550 mm, total width: 1,260 mm, total length: 1,900 mm, water tank capacity: 250 l, battery voltage: 36 V, noise level: 67 dB, We offer for sale a Karcher B 250 R + D100 ride-on scrubber dryer equipped with an operator’s seat. We also have an R 100 cleaning head available in stock, which can be swapped at any time. Condition of the machine: Very good Year of manufacture: 2015 Operating hours: 775 hours The machine is in excellent condition, both visually and technically. It has undergone a comprehensive, detailed overhaul, making it fully operational and ready for immediate use. Iaodpfx Aisw A Axhoxow Each device we offer is shown in authentic photos — you are buying exactly the machine you see in the images. All equipment purchased from us comes with a 12-month WARRANTY. Technical specifications: Drive type: Battery powered Brush working width (mm): 1000 Working width / suction (mm): 1200 Water tank: clean / dirty (l): 250 / 250 Theoretical surface performance (m²/h): 8000 Practical surface performance (m²/h): 6000 Battery power supply (V/Ah): 36 / 630 Battery run time (h): max. 6 Brush rotation speed (rpm): 140 Brush pressure (g/cm²): 35 Water consumption (l/min): 8 Sound pressure level (dB(A)): 67 Rated power (W): up to 4600 Dimensions (L x W x H) (mm): 1900 x 1060 x 1550

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h Iaedpfezldw Iex Aixow for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: used, mileage: 101,692 km, power: 228 kW (309.99 HP), first registration: 12/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2007, Equipment: ABS, air conditioning, crane, = Additional options and accessories = - Tipping hydraulics = Remarks = Crane Rotator: ✓ Clamshell bucket: ✓ = More information = Front axle: Steering Isdezmam Ujpfx Aixoaw Rear axle: Double wheels Crane: TLC 105.2, behind the cab

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 234547768256008, professionally and completely refurbished and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Iedpfxsi Ebhle Aixoaw

Condition: ready for operation (used), Indramat KDV 2.2-100-220/300-220 power supply, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Iaodpfoi Ebi Usx Aixew

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 main spindle drive, serial number: 230902-731398-003, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Iajdpsi Ebg Iefx Aixew