Used Illig Ua 155 4G Solo for sale (2,247)

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Hodpoxlzqfefx Apyonn Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel Hnedpswf Dvaefx Apysn - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets Hnjdpfx Apoxlzrceyen - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table Hnjdpfx Ajft S Eaopyon > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm Hnsdpfx Apotv Ivzsyen maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators > Upper stamping system > Protective grille > 4 cooling fans D05 > Automatic pre-blowing and demoulding Hjdpsfug Ansfx Apyonn

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Memorizable bubbling and demolding intensity → cascaded pneumatic valves Hnjdpjt Iracsfx Apyon BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Year of construction: 1973, condition: used, Illig UA100d Vacuum Forming Machine, Manual Loading of Material Sheets, Forming Area 960 x 560mm. Serial No. 2167 (1973). Country of Origin: Germany Hedpjy Shcqefx Apyonn Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, empty load weight: 235 kg, maximum load weight: 515 kg, overall weight: 750 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, loading space volume: 0.8 m³, color: black, construction height: 780 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, lowerable cargo bed / 750 kg axle, * IMMEDIATELY AVAILABLE * incl. lowerable cargo bed / 750 kg axle Technical data: - Type: New vehicle - TÜV: New/3 years - Availability: IMMEDIATELY! - Gross vehicle weight: 750 kg - Unladen weight: 235 kg - Payload: 515 kg - Interior dimensions: 260 x 155 x 15 cm (L x W x H) - Overall exterior dimensions: 403 x 205 x 78 cm (L x W x H) - Loading sill height: 31 cm - Tires: 175/70R13 steel rim - Brake: No - Support wheel: yes, automatic - 100 km/h: yes - Incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: Multiplex wooden floor 18mm - Side walls: Steel profile powder-coated black - Side wall height: 15cm - Chassis: Low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: none - Drive-on angle: approx. 13 - Wheel stopper: none - Overrun device & brake: - - Frame/chassis: Welded hot-dip galvanized steel frame - Lashing eyes: 8 pieces foldable - Winch: at extra charge - Supports: Supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - 3-sided body made of sturdy galvanized steel profile and powder-coated in black-grey (RAL 7021) - Continuous drive-on wedge enables drive-on across the entire width of the loading area - Insertion options at all corners, e.g. for tarpaulin frame - Folding number plate Foldable license plate holder - Sturdy plastic mudguards: - 8 fold-down lashing eyes in the side wall profile - 1 lashing eye in the bulkhead profile - 1 lashing ring in the middle of the rear loading area - Reinforced, automatic support wheel for safe parking of the loaded trailer - Made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Drive-on angle when tipped approx. 13 for AS 826 - Rear license plate holder, can be swiveled away for loading - Automatic reverse drive - 13-pin plug - Reversing light - Large reversing light plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - anti-theft device - spare wheel - storage box - high tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Hnsdpfxou Htpde Apysn

Condition: new, empty load weight: 370 kg, maximum load weight: 1,030 kg, overall weight: 1,400 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, loading space volume: 0.8 m³, color: silver, construction height: 780 mm, working width: 2,050 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, lowerable loading area / 1400 kg axle / Including 100km/h, * IMMEDIATELY AVAILABLE * incl. lowerable loading area / 1400 kg axle / Including 100km/h Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1400 kg - Unladen weight: 370 kg - Payload: 1,030 kg - Interior dimensions: 260 x 155 x 15 cm (L x W x H) - Overall exterior dimensions: 403 x 205 x 78 cm (LxWxH) - Loading sill height: 46 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Multiplex wooden floor 18mm - Side walls: Steel profile powder-coated black - Side wall height: 15cm - Chassis: Low loader lowerable, ALKO rubber spring axle - Tipping function: lowerable - Hydraulics: Hand pump - Drive-on angle: approx. 6 - Wheel stopper: without - Overrun device & brake: ALKO - Frame/chassis: Welded hot-dip galvanized steel frame - Lashing eyes: 8 pieces foldable - Winch: at extra charge - Supports: Supported by rear. - Ramps: with rear drive-over point - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - 3-sided body made of sturdy galvanized steel profile and powder-coated in black-grey (RAL 7021) - Continuous drive-on wedge enables drive-on across the entire width of the loading area - Wheel shock absorber + 100 km/h approval - Insertion options at all corners for e.g. tarpaulin frame - Folding number plate Foldable license plate holder - Sturdy plastic mudguards - 8 fold-down lashing eyes in the side wall profile - 1 lashing eye in the bulkhead profile - 1 lashing ring in the middle of the rear loading area - Reinforced, automatic support wheel for safe parking of the loaded trailer - Made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Drive-on angle in tilted state approx. 6 - Hand pump with hydraulic lowering device and lowering lock - Rear license plate holder, can be swiveled away for loading - Automatic reverse drive - 13-pin plug - Reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - anti-theft device - spare wheel - storage box - high tarpaulin - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Hnjdpsu Hrwgofx Apysn

Condition: good (used), Year of construction: 2002, machine/vehicle number: C3-0203, Offer 24508 Technical data: - Load capacity 100 kg - Faceplate diameter 500 mm - Through opening 155 mm - Faceplate manually infinitely tiltable left + right - Rotation infinitely adjustable by motor - Right + left rotation - Electric foot switch for start - stop - Table height in horizontal position approx. 940 mm - 3 jaw chuck - Drive 220 V Hnjdpjvtn A Uofx Apyon - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 589-0263, Make Illig Model VHW 60/2 Year 2001 Condition Good Number of Heating Rolls Two Max material width 610 mm Max material thickness 1.8 mm Max temperature of heating rolls 140 °C Material wrap around 563 Grad Total connected load 36.0 kW Hedpfx Aeuzi I Ejpyjnn Dimensions 2300 x 1400 x 2400mm L x W x H (300kg) All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Make Illig Model RV 74 Year 1999 Hours Approx TBC Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Depth of Draw Above-Below 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 20 / min Hnodpfx Apoxp H Nusyjn Total Weight 6,600 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2011, operating hours: 29,420 h, condition: excellent (used), functionality: fully functional, Make Illig Hodpozam Hcefx Apyjnn Model RDK 80 Year 2011 Approx Hours 29420 Stations Forming, Hole Punching, Robot, Cutting and Stacking Delivery date Immediately Max forming area 756 x 565 mm Max Sheet Width 805 mm Depth of draw 120 / 120 mm Steel Rule Punching Force 600 kN Max cycles-minute 55 Forming pressure 6 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: ready for operation (used), Siemens Simatic S5-155U 6ES5948-3UA22 CPU948 version 1 SN 73756, used, in good condition, 100% functional, delivery as per photos Hjdpfx Aox Dxl Repyonn

Condition: ready for operation (used), Siemens Simatic S5-155U 6ES5948-3UA22 CPU948 Version 1 SN 73755, used, in good condition, 100% functional, scope of delivery as shown in photos. Hedpfx Aox Eu Itjpyonn

Condition: good (used), Technical data for the pallet rack beam: Racking system: Jung Heinrich Type: Esmena Scope of delivery includes: 01x Pallet rack beam, used Material color: green Box profile: 155 x 55 mm Claw: 4 hooks Clear span: 3,610 mm 02x Safety pin, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: Hnodpow Upxwofx Apyon This item is offered for collection only. Any requested transport or shipping of this item is subject to additional costs, which can be individually inquired at our company depending on the delivery location and scope.

Condition: good (used), Technical data for pallet racking upright: Racking system: Stow Type: Pal Rack NS Included in the scope of delivery: 01x pallet racking upright, used Material colour: grey Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Hnedow Ea H Uopfx Apyon Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) Height: 8,500 mm Depth: 1,100 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any requested transportation or dispatch of this item is subject to additional costs, which can be provided separately depending on the delivery location and scope of delivery.

Condition: used, power: 67 kW (91.09 HP), next inspection (TÜV): 02/2027, Year of construction: 2005, operating hours: 9,560 h, Equipment: air conditioning, all wheel drive, cabin, German tractor, in use until recently. Second owner, both times government park administration: from 2005 to 2017, and from 2017 to 2026. All-wheel drive. 4-cylinder turbo diesel engine with 4485 cc and 91 hp. Large 24-speed Hi-LO transmission, 4 gears in 3 ranges, 2 powershift stages, and powershift reverser. 40 km/h maximum speed. Air brake system. Comfort cabin with air-suspended driver's seat and air conditioning. Rear PTO with 3 speeds (540/750/1000 rpm). Category II rear hitch with quick couplers and auxiliary lift cylinders (5060 kg capacity). Quick-adjustable height towing hitch. 2 mechanical control units (switchable between single- and double-acting). Front PTO and front hydraulics were retrofitted to the new tractor in 2005. Unladen weight: 4,250 kg. Hsdjy Ean Sjpfx Apyenn Permissible total weight: 6,200 kg. Registration as "LOF agricultural tractor". Transport dimensions: length 4.36 m / width 2.29 m / height 2.64 m. Front tires: 360/80R24. Rear tires: 440/80R34. All tires are in good condition. According to the vehicle registration supplement, various alternative tire combinations are permitted. The tractor is operational; deregistration scheduled for 16.04.2026. Inspection (TÜV) valid until 02/2027. This offer is only valid for commercial businesses, farmers, foresters, and similar self-employed individuals. Secondary occupation is sufficient. The offer is also valid for government agencies. Sale to private end consumers is strictly excluded. Subject to prior sale and possible errors. Net price: €20,900.

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Hsdpfsq A Um Rox Apysnn Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 2006, condition: good (used), Illig SK 74-C from a workshop for the disabled Hnjdpfjr Nv E Njx Apysn Year of construction 2006 serial no.426-0172 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed Hsdpfx Ajq Nn Hcepyonn 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister packing machine, year of manufacture 1991. This is a high-performance automatic inline blister sealer with card feeder, suitable for film thicknesses from 150 µm to 400 µm (possibly higher, but not personally tested). The complete line is being offered (see pictures). Speed: 1–9 cycles/minute with 4-up production. Example: air freshener, 4 units per blister palette = 2000 blisters/hour. Approximate dimensions: 9m x 1m x 2.25m. Sealing plate size: 57x32cm. The machine is 100% functional and is still in operation. Inspection and trial run before purchase are possible. Location: Czech Republic (10 minutes past the Bavarian/Czech border at Furth im Wald). Hnsdpfx Asy Anifepysn

Condition: excellent (used), Year of construction: 2002, Consisting of: Hodjy H H U Iepfx Apyenn - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: new, empty load weight: 230 kg, maximum load weight: 520 kg, overall weight: 750 kg, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 150 mm, tire size: 175/70R13, Drop-down trailer single-axle unbraked Unsinn AS826-13-1550. The platform of this car trailer is tilted so that motorcycles, quad bikes, ATVs, sweepers and similar vehicles can be easily loaded. Hjdpfx Asq Nm A Nepysnn The tiltable car trailer is equipped with a perforated railing, support wheel, lashing eye and tubular drawbar. Accessories include a motorcycle stand rail, motorcycle rocker, tarpaulin and frame, side wall attachments, lashing eyes, motorcycle lashing strap, tool box, anti-theft device and lashing straps.