Used Jäger Sk4 for sale (177)

Condition: excellent (used), Year of construction: 1995, total height: 600 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 200 kg, Seperate coolant and frequency converter Last service & Test Log in 2018 Ljdpfx Afjzcxy Hewsaf Run out in 1 uM Spindle speeds:50000Rpm Spindle Taper:50ISO/Bt/Mk Length: 1200mm Width: 800mm Height: 600mm Weight: 200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Jäger SFU 0200/1 frequency inverter, serial number: 31079493, unused, 100% functional, scope of delivery as shown in the photos. Ledpfx Afoi Ebufowsaf

Year of construction: 2008, condition: used, Used machine Year of manufacture: 2008 Performance: 29 pallets/hour (at a package height of 1200 mm incl. pallet) Weight: 690 kg Laodpfowt E Uajx Afwof Turntable diameter: Load capacity: 1200 kg Drive: Electric motor 550 W / 50 Hz 400 V Rotation speed: 10 rpm + 20% Rotation direction: right Film carriage drive: 370 W Top press carriage drive: 370 W Max. pallet dimensions: 1200 x 800 mm (base area) Film roll weight: approx. 17 kg Footprint: approx. 3600 x 1800 x 2600 mm Availability: short notice Storage location: Hesse

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Lasdpewu Dcxofx Afwef Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing applications Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Laodpfjfgpfmjx Afwef Tool holder: 33 x 33 mm screw clamp - Movable in three axes (horizontal, vertical, rotational) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 balancer units for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - for virtually weightless suspension of small devices - Load capacity adjustable in stages - Constant tensile force Space requirement L x W x H: 770 x 310 x 1200 mm Weight: 19 kg Good condition

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing operations Type: Handy-flex 200 Horizontal movement: 300 mm Laodsfx Hxzjpfx Afwjf Vertical movement: 370 mm Load capacity: 10 to 14 kg Outreach: 250 to 550 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Movable in three axes (horizontal, vertical, rotational) - 1 unit balancer for vertical movement TECHNA, Type 9340, adjustment range 10 to 14 kg - Adjustable locking pawl for vertical movement, manual release via Bowden cable - For weightless suspension of small devices - Load capacity adjustable - Constant tensile force Space requirement L x W x H: 880 x 500 x 1120 mm Weight: 23 kg Good condition

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Lsdpfsfx Hyfox Afwsaf Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Year of construction: 1970, condition: good (used), Technical Details : Wire range - 1- 7 mm Capacity - 15 - 25 cross wire /min. Mesh width - 10 - 100 mm Ljdpfx Afed Nm Abewsaf Working width - max. 2.200 mm Engine power - 4 kw

Condition: good (used), Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. - Up to approximately 30 strappings per minute. - Internal frame dimensions approximately 850 x 800 mm. - Secure strapping with 12 mm strap. - Automatic strap feed and strap return. - Adjustable strap tension. - Strapping can be triggered via hand button or foot switch, or alternatively, automatic mode selectable (sensor in the table top). - Simple and ergonomic spool change and threading system. - Equipped with ergonomic roller conveyors on the table surface. - Working height approximately 820 mm. - Machine can be moved and locked in place on castors. The machine can be demonstrated under power. Ledpfxjy Dvcie Afwjaf

Condition: excellent (used), Collet chuck Collet chuck SK 40 DIN 69871 Tightening thread M 16 Collet type OZ-467 E length 140 mm 10 pieces with set 150 Euro Ledpfxslwqc Es Afweaf Single delivery 15 Euro

Condition: used, saw blade diameter 275 mm cutting diameter 90 mm stroke mm capacity 45 degrees: flat 150 x 100 mm Ljded Ih Taspfx Afwoaf cutting speed 16/32 m/min miter cut 45 ° total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1990, saw blade diameter 400 mm cutting length 400 mm cutting diameter 130 mm speeds 9,5 - 48 U/min peripheral speed 12 - 60 m/min 130 mm 125 mm 400 x 125 mm 130 mm 110 mm rechts 200 x 125 mm links 280 x 125 mm total power requirement 4 kW weight of the machine ca. 1,5 t Ledpjuia Hrjfx Afwjaf dimensions of the machine ca. 1,2 x 2,0 x 1,7 m

Condition: used, Year of construction: 1988, saw blade diameter 400 / 460 mm cutting length 650 mm cutting diameter 150 mm capacity 45 degrees: flat 450 x 150 mm capacity 90 degrees: flat 650 x 150 mm Slide cross 855 mm work height max. 950 mm Ljdst H Spbopfx Afwoaf total power requirement 1,3 / 1,6 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2300 x 1050 x 1900 mm

Condition: excellent (used), Cold circular saw Trennjäger, model VC 260 HA. Saw blade diameter: 315 mm. Cutting capacity: 90 mm. Cutting area for flat material: 160 x 65 mm. 380 Volt, 1.4 kW. Width: 1500 mm, depth: 1000 mm, height: 1400 mm. Supplied with a spare blade. Lsdpfx Afexwt Tpswsaf

Condition: as good as new (ex-display), Collet chuck Ledpfxslrt S Ns Afwjaf SK 40, DIN 69871/OZ32 Collet type OZ32 467 E Overall length 190 mm The parts are unused in the original, unopened packaging Price per piece 12 pieces available Weight per piece 2 kg

Condition: good (used), Year of construction: 1993, TRENNJÄGER metal circular saw with mitre function Includes longitudinal stop! Saw blade diameter: 400 mm Cutting length: 400 mm Cutting diameter: 130 mm Lasdpfjx U Dl Tjx Afwof Year of manufacture: 1993 380 V Power: 4.5 kW

Condition: excellent (used), machine/vehicle number: 68131, Cut-off saw Ø max .: 300 mm here cutting area round: 100 mm Saw head can be swiveled up to: 45 ° Vice clamping range up to: 160 mm Cutting saw speed: 2500 rpm Drive motor: 230 V, 1.1 kW Required space: 850 x 750 x 1500 mm Ledpfx Afefug Exsweaf Weight: 126 kg

Condition: excellent (used), Saw blade diameter: 360 mm Cutting range at 90° round: 110 mm Cutting range at 90° rectangular: 110 x 400 mm Cutting range in miter at 45° round: 110 mm Cutting range in miter at 45° rectangular: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space required: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg Laodpfev D Hzkox Afwof

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Laedpfoxld Awex Afwjf

Condition: excellent (used), For sale: professional KOMET KFK 1 M02 02360 boring head with micrometric adjustment – a top-tier tool for high-precision hole machining in industrial production and toolrooms. Very good condition – the tool is fully functional and ready for operation. The precise micrometric scale allows adjustment with an accuracy of 0.01 mm, ensuring the highest surface finish quality. • Manufacturer: KOMET • Model: KFK 1 – M02 02360 • Mount: SK40 / DIN 69871 • Scale: micrometric 0.01 mm • Range: precision boring and finishing of holes • Condition: used – very good technical and visual condition. Lasdpfoxk T H Nex Afwjf

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining Ljdpfexizb Esx Afwsaf • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), Professional drill chuck from the renowned brand GEWEFA – German quality and precision manufacturing. Designed for holding drills and machining tools on CNC milling machines, machining centers, and conventional machines with SK40 DIN 69871 taper. 📌 Technical specifications: . Manufacturer: GEWEFA – Made in Germany . Type: SK40 × Ø1–16 mm . Catalog number: 28.05.046.001 / 28.05.046.002 . Taper: SK40 DIN 69871 AD/B . Clamping range: Ø1 – 13 mm . Year of manufacture: 2007 . Condition: used, very good – fully functional Lajdpfx Afjxizbfowof ✅ Advantages: . Precision manufacturing – high concentricity and tool stability . Genuine product from Germany – not a Chinese copy . Ideal for serial production and precision machining . Ready for immediate use. Price quoted per piece.

Condition: excellent (used), For sale: Complete set of ATORN Germany tool holders – high quality, premium brand Hahn+Kolb. Technical specifications: • Manufacturer: ATORN • Model: 20723200 • Standard: DIN 69871 SK40-1/10-100 Lasdpfx Afow Ulrajwof • Length: 100 mm • Set includes: several pieces, some with mounted drills (see photos) Condition: Very good, practically stored as new. Only used for testing, no operational wear. Suitable for CNC machining centers and milling machines. - Price per piece.

Condition: excellent (used), For sale: Professional GARANT SK40-6-50 tool holder for precise clamping of Ø6 mm tools. Product of the renowned Hoffmann Group / Garant – Germany, used in CNC machining centers. • Clamping type: SK40 (DIN 69871) • Size: Ø6 mm • Length: 50 mm • Catalogue number: 300210.6 • Balancing: G2.5 up to 25,000 rpm • High accuracy, stable clamping • Ideal for VHM end mills and drills as well as precision tools • Very good condition – tested, ready for use. GARANT tool holders represent the top tier in clamping technology – guarantee of quality and durability. -- PRICE PER PIECE -- Lajdpfx Afsw Syzwewjf

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Ljdpfjw Sy D Ejx Afwjaf