Used Jaroma 60 for sale (21,716)

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) Lasdpfx Abjzu Sgpo Noh

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Temperature range: Ambient temperature to -110 °C Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase Laodoz I Ti Ajpfx Ab Noh EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Suitable for integration into continuous hardening systems

Condition: excellent (used), Catalog number 7303 TECHNICAL DATA - Shaft width 640mm - Number of knives 3 pcs - Max thickness of the workpiece 250mm From above: - Pawls - Toothed infeed shaft, pulling type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pulling type From below: - Adjustable rollers in the lower bed, 2 pcs - Motor 7.5kW - Electric bed lifting - Lifting motor 0.75kW - 4 feed speed types - Feed motor 1.5kW - Diameter of the dust extraction nozzle 140mm - Dimensions L/W/H 1120x1250x1680mm - Weight 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR Laedpfszxg S Ujx Ab Njh (Prices may vary due to larger fluctuations)

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Lodpfx Asz N Swijb Njah Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2012, Are you looking for a solution for efficient and environmentally conscious operations? Then a waste compactor is the solution to your waste problem! These powerful and reliable waste compactors are suitable for compressing various materials such as cardboard, plastic, textiles, and other materials. The machines process the waste into bales. Ideal for companies that want to save space and recycle. Specifications Brand: DIXI Type: 60 SD Year of manufacture: 2012 Ljde Adrtropfx Ab Njah Pressing force: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Feed opening dimensions: 115 cm x 80 cm deep x 55 cm high Video available upon request Transport available upon request

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. Lajdoz Rnwhopfx Ab Neh The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. The new price was EUR 38,000.

Year of construction: 1978, condition: reconditioned (used), Thicknesser Jaroma DSMB 63 7.5 W lignum production Poland Jaroma - Technical Documentation TECHNICAL PARAMETERS: shaft width: 630 mm detail thickness: 240 mm Ledpfx Asiq Dk Sjb Noah 4 shaft knives: knife shaft diameter: 125 mm number of rotations of the knife shaft: 6000 rpm adjustable rollers in the lower tabletop: motor: 7.5 kW electric height adjustment: two types of feed speed: dimensions (length/width/height): 120/128/125 cm weight: 1060 kg

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted Lsdpfxeh S Uhfe Ab Njah The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: used, Year of construction: 1998, machine/vehicle number: 844, functionality: fully functional, pressing force: 61 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 640 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,000 kg, Equipment: documentation/manual, TPT-02 Hydraulic 4-Column Press – 61 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column press from ALN August Luigart & Sohn GmbH & Co. KG with a maximum pressing force of 61 T. The machine has a table size of 1,700 × 1,200 mm, a maximum installation height of 1,350 mm, and a stroke of 1,000 mm, making it suitable for pressing, forming, straightening, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 61 T – 1,700 × 1,200 mm ==== General Specifications - Manufacturer: ALN August Luigart & Sohn GmbH & Co. KG - Design: Oil-hydraulic 4-column press - Model: 4 SPy 60 SO - Machine Number: 844 - Year of Construction: 1998 - Pressing Force: 61 T - Nominal Force: 600 kN - Table Size (Working Area): 1,700 × 1,200 mm - Plunger Plate Size: 1,700 × 1,200 mm - Table Height: 640 mm - Open Height: 1,450 mm - Installation Height: 1,350 mm - Stroke: 1,000 mm - Front Clearance: 1,700 mm - Side Clearance: 850 mm - Installation Width Front/Rear: 1,700 mm - Installation Width Side: 850 mm - Maximum Tool Upper Part Weight: 1,200 kg - Total Height: 3,992 mm - Total Width: 2,645 mm - Total Depth: 1,965 mm - Total Weight: 12 T - Basement Required: No ==== Hydraulic Cylinder - Number of Cylinders: 1 - Cylinder Diameter: Ø 180 mm - Piston Rod Diameter: Ø 160 mm - Guide Column Diameter: Ø 125 mm - Stroke: 1,000 mm - Max. Working Pressure: 236 bar - Return Speed Downwards: 250 mm/s - Return Speed Upwards: 280 mm/s - Initial Pressing Speed: 17.5 mm/s - Setting Speed: 10 mm/s ==== Hydraulics & Drive - Main Motor: 25 kW - Oil Tank: 650 l - Oil Type: HLP ISO VG 46 - Oil Filter Fineness: < 25 µm - Operating Temperature Max.: 60 °C - Pneumatic Accumulator: Yes ==== Tooling - T-Slots: 5 - T-Slots according to DIN 650 / T22 M20 ==== Control System - Control: SIEMENS SIMATIC Touch Panel - Control Panel: On the frame - Two-Hand Control - Valve Voltage: 24 V DC - Control Voltage: 230 V AC ==== Safety Features - Snap-Through Dampening - Follow-Up Distance: 26 mm Lajdpfx Abe Adrzcs Njh - Follow-Up Time: 113 ms - Safety Distance: 228 mm - Emergency Stop - Light Curtain / Light Barrier - Protective Grille - Separate Control Cabinet - Maintenance Platform: No ==== Electrical Connection - Operating Voltage: 415 V - Frequency: 50 Hz - Power Supply: 3-phase - Connection Cable: 16 mm² - Fuses: 63 A - Main Motor Current Consumption: 48 A - Noise Level: < 70 dB(A) ##### Application Areas: Pressing, forming, straightening, insertion pressing, assembly operations, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic press, 4-column press, oil-hydraulic press, hydraulic press, ALN press, August Luigart press, 4 SPy 60 SO, 61 T press, 61 ton press, forming press, pressing press, straightening press, assembly press, industrial press)

Year of construction: 2001, condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Year of production 2001 Lajdegyz Rkspfx Ab Noh Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters Lsdpfx Aoz Tiwheb Neah • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Laedpez Rzyvjfx Ab Noh

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Laedpoz Ix Ukofx Ab Neh Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Lsde Aa Irpepfx Ab Noah Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Condition: used, Year of construction: 2022, functionality: fully functional, For sale, starting from our location in 45888 Gelsenkirchen, are two Inject Star P-60 residual meat recovery systems, including bone crushers and accessories. These systems are used, manufactured in 2019 and 2022, and come from a business liquidation. Ledpfx Absz Iz Tcj Nsah Currently, both systems are still operational and can be inspected on-site by appointment. Disassembly, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 1993, operating hours: 30,703 h, functionality: fully functional, bale height: 700 mm, input voltage: 400 V, input current: 85 A, operating pressure: 250 bar, input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Avermann AVOS BP 1411-60 baling press with conveyor belt, manufactured in 1993, for sale. If you have any questions or require further information, please do not hesitate to send us a message or call us. Laodpfez H Ardox Ab Njh The machine is expected to be dismantled and prepared for loading at the beginning of November. Inspections can be arranged prior to this date.

Condition: good (used), Year of construction: 2015, pressure 60.0 t punching cross-cut in cmm 28 in 15 / 38 in 11 mm square edge steel 35 x 35 mm L-beam 120 x 120 x 12 mm round bar steel 40.0 mm flat steel 200 x 20 / 300 x 15 mm blade length 317 mm throat 220 mm work height max. 940 / 1140 mm strokes per minute max. 26 work stroke max. 55.0 mm oil volume 23.0 ltr. total power requirement 4.0 kW weight of the machine ca. 1440 kg Laedpfx As Aa A Ifeb Neh Dimensions (HxWxD) 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Emergency stop button - Operating instructions (PDF)

Condition: good (used), Jaroma Thicknesser Laedpfeztaktex Ab Nsh Max. planing width: 530mm, Max. planing height: 200mm, 2 feed speeds, 3 conventional knives (wedge-type), Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor 130mm dust extraction port Machine ready for operation.

Condition: excellent (used), CATALOGUE NUMBER 7573 Technical specifications: - shaft width 640mm - number of knives 4 pcs - max. thickness of workpiece 270mm - from above: - pawls - toothed infeed shaft, pull-type - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pull-type - from below: - adjustable rollers in the lower table, 2 pcs - motor 7.5kW - electric table lifting - lifting motor 0.75kW - 2 types of feed speed - feed motor 1.1kW - diameter of dust extraction port 160mm - dimensions L/W/H 1150x1240x1170mm - weight 1073kg ADVANTAGES - Polish production - electric table lifting - DTR documentation - used thicknesser, very good condition Net price: 26900 PLN Laodpfeztw I Nex Ab Nsh Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Double-sided planer Jaroma, two-sided thicknesser DSRA - 40 Planing width: 40 cm 1 x bottom planing shaft with 4 knives, 5.5 kW (surface planer) 1 x top planing shaft with 4 knives, 5.5 kW (thicknesser) 7 upper feed rollers Lsdpfxoy Nlp As Ab Njah Maximum planing height: 170 mm Minimum workpiece length: 350 mm Power requirement: 15 kW Feed: 2 speeds Machine tested, ready for operation, in very good condition.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,805 h, load capacity: 4,000 kg, lifting height: 4,450 mm, fuel type: electric, mast type: other, battery capacity: 870 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 2,400 mm, tire condition: 90 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), total height: 3,150 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following technical specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,805 Still 4.0-ton electric forklift with a full cabin and heating, battery at 78%, good tires (rear tires new), standard free-lift mast, side shifter, 4th hydraulic valve, single-pedal operation, four-link mechanical system, pre-equipment according to StVZO (German Road Traffic Licensing Regulations), fork length 2,400 mm (other lengths possible), charger. Lsdpfxj Adnzfj Ab Njah Additional attachments such as fork positioners, rotators, extension forks, etc., as well as other fork lengths, are available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drives are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). Further information about us and other offers can be found on our newly designed website!

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Lasdsz Hq Akjpfx Ab Neh Used machine, operated without malfunctions until disassembly. Price on request.

Condition: excellent (used), Equipment: foot remote control, Capacities: Force: 60 tons Punching: Ø28 x 15 mm Ø38 x 11 mm Shearing of flat material: 200 x 20 mm 300 x 15 mm Angle iron: 120 x 120 x 12 mm Solid material: Ø 40 mm 35 x 35 mm Length stop is included with the machine. Lsdj Adrcyjpfx Ab Noah

Condition: excellent (used), Year of construction: 2005, Technical specifications Motor power (kW): 4.0 Lasdoyi U Rzspfx Ab Noh Spindle speed (rpm): 1300/2500/3500/5000/6000/8500 Machine weight (kg): 440 Side carriage Machine dimensions (L x W x H, mm): 1200 x 800 x 1080 Table dimensions (mm): 1200 x 700 Year of manufacture: 2005

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table Laodpfx Abjz N Dque Noh for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm glass thikness : 2,3 - 19 mm This table has NO option for low e deletion