Used Jomet Sleevepack Pgi for sale (8)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 868, type of input current: three-phase, overall weight: 1,127 kg, input voltage: 400 V, input frequency: 50 Hz, operating pressure: 6 bar, Bushing machine for sale due to lack of need. Ijdpfjyzqr Tox Afheig

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 MACH-ID 9418 Make: TDG Solutions Type: PGI 1000 Year: 2022 Diameter: 1000mm 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Iedpfezcnm Aox Afhjig Width: 1000mm Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 3,000 kg, total length: 1,500 mm, total width: 700 mm, total height: 600 mm, input voltage: 380 V, type of input current: three-phase, year of last overhaul: 2010, Joint Strip Oto Mills (strip splicer), equipment suitable for splicing strips at the entry of the rollformer accumulator. Iiedpfx Asxmaa Isfhsg

Condition: good (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 305642, SEPPELER – Tank filling station Maximum axle load: 6500 kg Permissible total weight for access: 40,000 kg Containment capacity per tank (2): 180 liters Iiodpfxezck Aaj Afhog

Condition: new, Year of construction: 2025, Sleevepacker for a full 4-side wrapping of long and very long products like panels, etc. Suitable for single or multipacks. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic Infeed through conveyor, automatic outfeed into optionally available SHRINKtunnel-PE-XL. - Technical Specifications: MITSUBISHI/Japan PLC; 380V, 2kW; 6.0bar, 0.1m³/min; max. speed of the machine in neutral: 25 cycles/min; max. product dimensions (mm): L(unlimited)xW500xH330; sealing blade length: 700mm; machine dimensions (mm): L2000xW1500xH1900; weight (net/gross): 500/580kg. Iedpfev Nl Iyjx Afhsig Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, functionally tested; item originates from the dismantling of equipment at an automotive supplier Manufacturer: Mettler Toledo Type: IMPGI0015K4-2H-SA Function: Precision load cell for industrial applications Measuring principle: Strain gauge Material: Stainless steel Protection class: IP68 Ijdpfx Afjzgbz Hsheig Output signal: Millivolts per volt (mV/V) Supply voltage: 5–12 V DC Connection type: 4-wire Application: Platform scales, dosing and filling systems

Condition: new, empty load weight: 142 kg, maximum load weight: 608 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Garden Trailer 230 KIPP car trailer with leaf grid attachment, support wheel, flat tarpaulin and tarpaulin supports The Garden Trailer 230 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 5 working days. Once you have received the car trailer, all you have to do is register it. Advantages of a Garden Trailer 230 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want! Iodpfx Afet Id Ryehjig The Garden Trailer 230 KIPP car trailer is made of galvanized steel and is therefore rust and weatherproof. If you only store your car trailer outdoors, we recommend that you purchase a flat cover to protect your trailer. The entire structure is reinforced by two support beams fitted under the floor to support the loading area. The tiltable drawbar allows free tilting, making loading and unloading very easy and extremely time-saving. To meet the expectations of our customers, we offer this trailer model with a tilting drawbar at an exceptional price. Thanks to this, you can safely transport building materials, furniture or special equipment. You can remove the rear dropside at any time by pulling it off the brackets and gain much more space in a matter of seconds. From now on, you can transport many more things at once.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length Isdpfx Aszdz S Tefheig - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i