Used Jucat Jcp 6000 for sale (2,045)

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Nljdpfx Aoyrg Hyonfea

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Nlsdpfx Aeyrg H Honfoa

Condition: good (used), Horizon Stitchliner 6000 Booklet Maker This machine is in very good condition, with low mileage, and was manufactured in 2014. Description: This machine boasts a robust, compact, and professionally built design. It is characterized by high efficiency and binding quality. Maximum throughput is 6,000 cycles per hour, and with a die-cut option, 12,000 cycles per hour can be achieved. The StitchLiner is set up fully automatically using a touch panel. The machine can sew booklets of up to 200 pages at a paper weight of approximately 60 gsm. Machine equipment: Nlodpsy E Ewfefx Anfoa – 2 Horizon VAC-80 Sa + Sm collating towers – Horizon SPF-30S saddle stitcher – Horizon ACF-30S folding module – Horizon HTS-30S three-knife trimmer – Delivery, waste extraction system, 2 Hohner heads, compressors, additional components, accessories, documentation Technical specifications: Maximum format: 350 x 500 mm Minimum format: 140 x 200 mm Paper weight: 53 to 210 g Maximum booklet thickness: 5.2 mm plano Staple spacing: 60 to 150 mm Three-knife trimmer cutting thickness range: 2 to 25 mm Production capacity: up to 6,000 booklets/h Wire thickness: 0.5-0.7 mm

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Nledpfx Aex Ai Hpenfja Clemco blasting pot (used), 100 liters Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Njdowzvxfopfx Anfela Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Transport possible.

Condition: good (used), Year of construction: 2014, Table size 6000 x 1100mm, traverses X Y Z 4500 x 1600 x 1300mm, maximum workpiece weight 5000kgs, spindle taper DIN 50, toolchanger capacity 40 stations, spindle speed 5,000rpm, automatic head, swarf conveyor, 4th axis rotary table Nlsdpfx Ansy Ey Rtefoa

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Nledpfjyw Tkwjx Anfja Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Condition: used, Year of construction: 2007, Perfect binding line Wohlenberg City E-6000 (edition 6000) Year: 2007 Consisting of Book block feeder Solema Fastbook Gathering machine Wohlenberg Sprinter E Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST - Opticontrol OSC 1-1 - Winjector vacuum system - Set up element - Criss cross delivery - Transfer into the binder Perfect binder Wohlenberg City E-6000 (edition 6000) Description: - TFT touch screen - Number of clamps: 15 - Milling and roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Front cutter: VSS - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - PUR spine gluing unit Nodpfsx Dki Ujx Anfjla - Rotary cover feeder - Scoring station - First nipping and pressing station - Second nipping and pressing station - Lay down device (to the left) Transport system Description: - Transport system, length (approx): 50 mtr - Escape delivery Three knife trimmer Müller Martini Merit S Year: 1997 Description: - Right hand infeed - Automatic hopper feeder for inline production - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Rima RS-3310S Year: 2007 - Delivery to the right Shrink wrapping machine BVM BMS 6030 W Year: 2007 With shrink tunnel

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Nljdpey Dr Eaofx Anfea Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2003, condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -Manufacturer: WIMO Lifting Technology -Turning device: simultaneous turning of several stacks of circuit boards, or rotation of workpieces -Loading: loading and unloading from the front with a forklift -Maximum internal width: 4000 x 1700 mm Njdpfjyt Ncmex Anfela -Maximum internal height: 580 mm -Minimum internal height: 250 mm -Load capacity: 6000 kg -Transport dimensions: 5960/2400/H2435 mm -Weight: 9000 kg

Condition: used, ZMM BULGARIA Centre Lathe 1100 x 6000 mm DRO CU 1000 x 6000 mm with axes reading system Type: CU 1000RD ro i x 6 Manufacturer: ZMM BULGARIA Year of manufacture: 2011 Main technical data: Swing diameter over bed: 1090 mm Distance between centers: 6000 mm Swing diameter over slide: 700 mm Dimensions (L x W x H): 8200 x 1800 x 1855 mm Power of main electric motor: 30 kW Machine weight: 11,000 kg Nodpfx Asy E Hgnonfola

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,197 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 6,000 W, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,525 mm, number of axes: 3, This 3-axis HGTECH Marvel 6000-3015 fiber laser cutting machine was manufactured in 2022. It features a working area of 3000 x 1500 mm. The machine is equipped with a Siemens SINUMERIK 840D SL CNC control and an automatic pallet changer for enhanced productivity. If you are looking to get high-quality cutting capabilities, consider the HGTECH Marvel 6000-3015 machine we have for sale. Contact us for further details. • Working area: 3000 x 1500 mm • Drive system: gantry drive • Transmission: rack and pinion • Control panel: touch color display • Motors and drives: Siemens motors and drive modules • Cutting head: Precitec ProCutter (compact/lightweight, autofocus focusing lens, distance sensor) • Laser source: external solid-state fiber laser Raycus • Laser output: single fiber (one LLK output) • Positioning: laser diode • Sheet detection: outer edge detection • Nozzle cleaning: automatic Nodpsy Egwaefx Anfjla • Workspace lighting: integrated • Status indication: machine status light • Waste system: roll-out drawers, right side • Electrical cabinet: with internal lighting • Electrical connection: 380 V, 3‑phase, 50 Hz, 100 A Additional equipment • Cooling system: chiller unit • Pallet system: automatic pallet changer (longitudinal) • Extraction system: multi-chamber extractionNote: Laser power appears twice with different values (4000 W and 6000 W). Please confirm the correct rating.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 800 mm Nedpfjy Edz Nox Anfela Z-Travel: 600 mm Spindle Taper: SK 50 Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 80,188 h, power: 3,200 kW (4,350.78 HP), pressing force: 22 t, Equipment: safety light barrier, Description X working area max.: 2585 mm Y working area max.: 1280 mm Control unit: Siemens Sinumerik 840 D Laser power: 2700 watts Operating hours: Laser beam on: 13,817 hrs Laser on: 71,637 hrs Operating hours: 80,188 hrs Standard equipment: - Rigid C-frame - Coordinate guide with integrated linear magazine - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser stations, ejector cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 3200W, vibration-isolated, integrated into machine frame, incl. cooling unit and laser control system - Programmable cutting gas pressure adjustment - Laser cutting head: 5'' lens, quick-change system, distance control Safety: Multi-beam light barriers, fast-acting hydraulic shutoff, extraction system and compact dust extractor, protective device against stray radiation at the cutting head + Laser TLF 3200 + Brush table + Marking / fast ribbing function + Softpunch Nlodsy Dpnfspfx Anfja + Blowing device for small parts + Repositioning cylinder + Bulge detection + Chip conveyor

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 6,010 mm, total length: 2,650 mm, · Spurbreite vorn 2500mm · Breite zwischen den Radarmen 1650mm · Überhang vorne 307mm · Überhang hinten 208 mm · Verlustmaß 1180mm · Anfahrwinkel max 45° · Rampenwinkel max 29° Nodpsy E Uidsfx Anfela · Abfahrwinkel max 45° · Mastneigung nach vorn 3° · Mastneigung nach hinten 5° · Außenradius Minimum 2540 mm · Außenradius 750mm · Plattformhöhe 1250mm · Höchstgeschwindigkeit 15 km/h · Steigfähigkeit 15% · Standard Lackierung Grün und Grau · Gefederter Sitz KAB Model 211 · Gummimontierte halboffene Kabine · Multidirektionaler Betrieb · Hydrostatischer Allradantrieb · Lastsensible Lenkung · 4-Wege Rad Positionerung · Hydraulischer Ölkühler

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Technical Specification Taper Size SK 50 Nodpfx Aney A Ifmjfola

Condition: ready for operation (used), Year of construction: 2001, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,590 mm, travel distance Y-axis: 1,725 mm, overall weight: 14,000 kg, number of axes: 2, CNC punching machine manufactured in 2001. This Pullmax 6000 features a maximum sheet size of 3000 × 1500 mm and a maximum punching force of 300 kN. It has a tool capacity of 15 positions and a maximum tool diameter of 76.2 mm. If you are looking to get high-quality punching capabilities, consider the Pullmax 6000 machine we have for sale. Contact us for further details. • Max sheet size: 3000 × 1500 mm • Max sheet size (without repositioning): 2500 × 1500 mm • Min sheet thickness: 0.7 mm • Tool capacity: 15 positions • Max tool diameter: 76.2 mm • Table speed (X/Y): 80 / 80 m/min • Positioning accuracy: ±0.1 mm Njdoy Alc Aspfx Anfola • Repeatability: ±0.03 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 44,973 h, laser power: 2,700 W, punching force: 22 t, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Description X working range max.: 2585mm Y Working range max.: 1280mm Control: Siemens Sinumerik 840 D Laser power: 2700 Watt Laser beam on: 6054 hours Laser on: 29826 hours Operating hours: 44973 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored 500x500mm parts chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control Nedpfx Anotpguzefsla - Sinumerik 840D control system, 10.4'' TFT color screen, simple operation, online help, diagnostic functions, maintenance logbook, technology data, job tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 2700 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Repositioning cylinder + bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: used, functionality: fully functional, power: 22 kW (29.91 HP), Year of construction: 1997, Circular vibrating screen Screen area: 6,000 x 2,000 mm Motor stand with drive components Lower deck with piping and spray system incl. plastic screen linings for both screen decks Nlodpfxjulu Rfs Anfsa

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 6100 mm Distance between frames: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic 14" TFT display Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Stroke: 350 mm Throat depth: 420 mm Motor power: 38.5 kW CE mark Dimensions (L x W x H): Approx. 6300 x 2500 x 3600 mm Weight: Approx. 36.5 tons Note: Table sinks approx. 450 mm into the floor Accessories: 1 set of tools: 1 top punch: 120 mm Nsdpfjy D Sb Ujx Anfjla 1 segmented die: V50, V35, V22, V16 Condition: Very good condition Only 9,200 operating hours The seller assumes no liability for typographical or data transmission errors. The machine is in optical, technical, and wear condition appropriate for its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Njdpfx Anoyymvljfela Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Njdpfx Ansy Eu Tvefola Software option:Adaptive Control

Year of construction: 2015, condition: ready for operation (used), A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible. Nledpfx Anjy D Trnefja

Condition: ready for operation (used), * Brand: Hazemag * Model: vibrating chute Nljdpsywnayefx Anfoa * Dim.: length 6000 mm - width 1150 mm * incl.: steel construction. * Driving : 22 kW E-motor.

Condition: ready for operation (used), * Brand: Cyrus Nlsdjywm Hlspfx Anfoa * Model: vibrating chute * Dim.: length 6000 mm - width 1200 mm * with: two pieces vibration motors of each 7,5 kW * Incl.: springs