Used Köckerling Vario 570 for sale (1,531)

Condition: used, Year of construction: 2024, Telescopic drawbar Cat III/IV Coulter set Wide coulter Levelboard with tine / air brake Following harrow DSTS roller Lighting / Nwedpetvgmcjfx Aazel

Condition: used, Year of construction: 2024, Telescopic drawbar Cat III/IV Coulter set HM point + guide plates Levelboard with / drag tines Air brake Following harrow DSTS roller Lighting / Nodjt Hrzdopfx Aazjwl

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Nedpfxjzgci Sj Aazjwl Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Tined Weeder DSTS Ø630 lighting hydraulic stone protection drawbar with / drawbar eye 51mm coulter set HMSpitze+Leitbl 30 coulter set Flügelsch flat 30m / roller level board DSTS roller Ø630mm chassis 40km/h air brake 40km/h / Nedpfx Aaer E Avtszswl

Condition: used, Year of construction: 2024, Telescopic drawbar Cat III/IV Coulter set Wide coulter Levelboard with spreading tine / air brake Following harrow DSTS roller Lighting / Nwedstt Rm Hspfx Aazsl

Condition: used, machine/vehicle number: 91671500, Year of construction: 2023, operating hours: 1,435 h, load capacity: 7,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Nedpezz Hwcjfx Aazswl Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Tires: White, non-marking tires Lighting: StVZO-compliant lighting with turn signals for road approval Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Weight: 1,500 kg Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 Operating hours: 1,435 h EQUIPMENT Battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 357

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Nodsrivbvjpfx Aazowl Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Condition: used, machine/vehicle number: 91671501, Year of construction: 2023, operating hours: 2,803 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Own weight: 1,500 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 2,803 h EQUIPMENT Battery charger Road traffic regulations (StVZO) lighting Direction indicator Road approval Formerly a Jungheinrich full-service unit Nwjdpfezz Hxgox Aazol All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 373

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. Nwodpfx Aaozbnl Ajzel -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Pendulum operation with partition wall Njdpfx Ajxup Iqjazswl 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA A-drive RTA 200/300

Condition: used, Year of construction: 2013, working width 6 m Nwjdsyv Ixaopfx Aazel Number of gangs 4 0 Number of folders 1 0 Number of rollers 1 St.

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Nwodozw Ukcopfx Aazol Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 91671431, Year of construction: 2022, operating hours: 423 h, load capacity: 7,000 kg, empty load weight: 1,500 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Traction force: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Battery capacity: 375 Ah Battery type: 3 PzS Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 2,200 mm Dead weight: 1,500 kg Service valid until: 09/2027 Safety inspection valid until: 09/2027 Operating hours: 423 h EQUIPMENT Cabin Windshield wiper White, non-marking tires Road traffic regulations (StVZO) lighting with turn signals Safety light (front) All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Njdpfezz Hxyox Aazowl Side loading up to 6 tons is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 388

Condition: used, Year of construction: 2017, 4-balking / Nwedstquhiopfx Aazjl

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Njdsyxhaispfx Aazswl Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: excellent (used), functionality: fully functional, fuel tank capacity: 10 l, color: original, overall weight: 570 kg, empty load weight: 570 kg, operation weight: 570 kg, lifting power: 150 kg/m, Year of construction: 2015, operating hours: 1,400 h, Equipment: pallet forks, Probst Jumbo-BV-Vario vacuum kerb lifter. In perfect working order but has some age related marks. Very well maintained and regularly serviced. This machine enables the laying of up to 400m of kerbs to be laid daily with just one operator feeding the kerb layer with no manual handling and just moving levers! Honda GXV390 petrol engine which is bullet proof when filters are cleaned regularly. Also available with the machine are Quick Hitch fork attachments to suit a Manitou telehandler and numerous different lifting plates to suit a variety of kerb shapes and sizes. Videos are available of the machine working. Nsdpfxoxvqcls Aazswl

Year of construction: 2020, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro 2-XS from the premium manufacturer Rational (successor to the VCC 112T). The iVario Pro 2-XS is offered including the basic accessories and base unit. The Vario Cooking Center is in excellent condition, as it comes from a training kitchen. The unit is available from approximately week 35. The list price for this unit is: €11,980 net / €14,256.20 gross The list price for the base unit is: €1,227 net / €1,460.13 gross Our price: €7,500 net / €8,925 gross You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating manuals, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: Nwodpfszvwqijx Aazol • W x D x H: 1100 x 756 x 485 mm • Power connection: V: 400 / kW: 13.7 / Hz: 50-60 • Serial number: E07VK20068047700 • Year of manufacture: 2020 • Capacity: 2 x 17 liters Additional included features: • iZone Control • Low-temperature cooking • Socket (Type F) • WiFi • Ethernet and USB interface Condition: Used, major inspection performed and fully functional Additional information: • Integrated spray hose with automatic retraction and spray dosage • High-quality pot base - seamless with rounded corners • Core temperature probe with 6 measuring points • 1,200 programs, each with up to 12 programmable and nameable steps • Integrated hose spray on the unit, integrated water drain in the pot • Temperature unit adjustable in °C or °F • Cooking pot can be tilted • Lid with integrated water inlet • Automatic display of service messages • IPX5 splash water protection • USB interface for HACCP data output and updates Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2023, Köckerling Allrounder flatline 750 7.50 mtr. carbide goosefoot coulters / Nodst I S Nqjpfx Aazewl

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Nwjdpfx Aozcux Sjazel Standard Electrical Data: Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Customer-side pre-fuse: 32 A

Condition: used, Year of construction: 2023, Köckerling Allrounder classic Hydraulic depth adjustment Herkulesz. Plus + / double spring Coulter set HM goose foot Single leveller STS roller Ø 530mm Lighting / Nedpfxst A Udms Aazjwl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: CE marking, Fully functional, in very good technical and optical condition. Year of manufacture : 2017 The set contains: EUROMAT B5 / B10 VARIO oven + 2 loading spaces. Baking Sheets/Tray - Accessories. Nwedpfx Aoz Aag Hsazol Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m.

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Chassis Quadro 300-570 manual Depth adjustment Telescopic drawbar Cat III/IV / coulter set HM sprayer+guide plate Coulter set Wing coulter flat Air brake / 40km/h Following harrow DSTS roller Lighting / Njdpot Tdv Hsfx Aazjwl

Condition: ready for operation (used), Year of construction: 2002, clamping force: 2,000 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg Allrounder 570 C 2000-675 features a clamping force of 2,000 kN and a maximum mold height of 950 mm. It includes a screw diameter of 50 mm and a maximum injection volume of 353 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 570 C 2000-675 machine we have for sale. Contact us for further details. • Space between columns: 570 x 570 mm • Maximum mold height: 950 mm • Minimum mold height: 300 mm • Maximum injection volume: 353 cm³ • Maximum injection pressure: 2,080 bar • Centering ring: 125 mm • Hot runners in the machine: 9 • Core pullers: 1 • Pneumatic valves: 1 Additional equipment Nsdez D T Dlopfx Aazswl • Wittmann W821 robot (year 2018)

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, model year 2021, from the premium manufacturer Rational (successor to the VCC 211). !!! Price upon request !!! Our in-house workshop has performed a fresh inspection, and the iVario L is in top condition. The offer does not include any accessories, but these can be purchased for an additional charge. The list price for this unit is €20,340 net = €24,204.6 gross. You will receive an invoice with VAT shown. Nwsdpfxjzrfbho Aazol Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21108058335 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional. Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and sweet dishes, soups and sauces, or the 5 cooking methods: boiling, frying, deep-frying, braising, and finishing. iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated Wi-Fi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are only made in accordance with our general terms and conditions (GTC).

Year of construction: 2017, operating hours: 1,052 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclic mold temperature management. It is equipped with a mold-proximal valve switching unit (piston accumulator) to supply the piston inserts with water at temperatures of up to 200°C. NEW PRICE of the system: €67,000 plus the water hoses. The system will be inspected by Technotrans (GWK) prior to sale. More technical details about the “vario” temperature control unit available on request... The complete system consists of: - Medium: water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect - Cooling capacity: 280 kW - 1 piece of 2-circuit vario system wh200 (cyclic temperature control of mold inserts) - 1 mold-proximal valve switching unit Nedsyxgnfjpfx Aazewl - 1 piston accumulator - 1 electronic control and regulation unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection package, optional for an extra charge ...and more, see pictures.