Used Kündig Duplex-650 for sale (4,213)

Condition: used, Year of construction: 1998, Working width ~ 650 mm Number of sanding units 2 st. output 9,75 kw Nodpfxezndrqe Am Teld Kündig Duplex-650 wide-belt sander for calibrating, fine sanding, and intermediate sanding of solid wood, veneered surfaces, and wood-based materials. This compact sander is particularly well-suited for smaller woodworking shops and versatile use in wood surface finishing.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar Nledpfx Amjkn Rz He Tsd length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Nedpfx Aey Naq Uem Tjld Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: used, functionality: fully functional, machine/vehicle number: H2X392V01052, Year of construction: 2019, operating hours: 650 h, load capacity: 2,500 kg, lifting height: 3,270 mm, free lift: 1,730 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, drive type: Diesel, Diesel Forklift Nodpfx Amswct E Ee Tsld VIN: H2X392V01052 Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Very good Description: Linde H25D-02 No.: R0563 Year of Manufacture: 2019 Operating Hours: 650 The unit is visually and technically in very good condition. Fast and uncomplicated transport is possible upon request! This listing is for identification purposes only! A detailed description of the condition and possible equipment is provided upon request! Errors and prior sale excepted, sold to businesses only. All sales of used goods are subject to exclusion of warranty and/or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other units on site.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,472 h, load capacity: 6,000 kg, lifting height: 4,650 mm, free lift: 2,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,300 mm, fork length: 1,400 mm, fork width: 150 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 400/60-15, overall weight: 17,500 kg, empty load weight: 11,500 kg, total height: 2,650 mm, total length: 2,600 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT C6000 – 2014 | DIESEL | DUPLEX 4,600 mm | FORK POSITIONER | FREE LIFT ✅ Ready to Work from Day One – No Additional Investment Required Are you looking for a reliable forklift that keeps your operations running smoothly without unexpected downtime? This COMBILIFT C6000 has undergone a complete service, thorough inspection, and is prepared for immediate operation. Simply put it to work and focus on your business. ✔ Major service completed (oils, filters, and full component inspection) ✔ Excellent mechanical and cosmetic condition ✔ Only 7,472 operating hours – genuinely low usage ✔ New tires installed ✔ No hidden costs or immediate repair requirements 🔧 Key Specifications Capacity: 6,000 kg Engine: Kubota Diesel Mast Type: Duplex Lift Height: 4,600 mm Free Lift: 2,050 mm Fork Positioner: 1,300 mm Fork Length: 1,400 mm Enclosed Heated Cabin 📋 Technical Specification General Information Manufacturer: Combilift Model: C6000 Year of Manufacture: 2014 Operating Hours: 7,472 h Capacity: 6,000 kg Load Center: 600 mm Machine Weight: 11,500 kg Mast & Lifting Mast Type: Duplex Maximum Lift Height: 4,600 mm Free Lift: 2,050 mm Forks & Attachments Fork Positioner: 1,300 mm Fork Length: 1,400 mm Fork Sideshift Dimensions Overall Height: 2,650 mm Overall Length: 2,600 mm Overall Width: 2,800 mm Construction Height: 3,400 mm Tires Type: Super Elastic Condition: New (100%) Front: 23x10-12 Rear: 400/60-15 Equipment ✔ Fully Enclosed Heated Cabin ✔ Fork Positioner ✔ Fork Sideshift ✔ Free Lift ⭐ Condition Mechanical Condition ✅ Fully serviced and workshop inspected Cosmetic Condition ✅ Refurbished and professionally prepared ✅ Corrosion-free ✅ Near-new appearance 🎯 Ideal For ✔ Narrow aisle warehouses ✔ Timber industry Nodezpiidjpfx Am Told ✔ Steel and metal processing facilities ✔ Pipe and long-load handling ✔ Indoor and outdoor operations 💼 What You Are Buying This is not just a used forklift. You are investing in a machine that has been professionally prepared and tested for reliable operation. ✔ Comprehensive pre-sale inspection and testing ✔ Ready for immediate deployment ✔ Live online demonstration available ✔ Delivery directly to your facility available 🚛 Delivery & Customer Support ✔ Transport available throughout Europe ✔ Complete logistics support ✔ Leasing and financing assistance ✔ Professional after-sales support 🏆 Why Choose FT LOGISTICS? We supply forklifts that work — not machines that spend their time in the workshop. ✔ More than 100 machines available ✔ In-house service and refurbishment facilities ✔ Customers throughout Europe ✔ Hundreds of satisfied clients 📞 Contact Us Today FT LOGISTICS 🚜 Quality You Can Rely On. 🔧 Service You Can Trust. 🤝 Partnership for the Long Term.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,472 h, load capacity: 6,000 kg, lifting height: 4,650 mm, free lift: 2,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,300 mm, fork length: 1,400 mm, fork width: 150 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 400/60-15, overall weight: 17,500 kg, empty load weight: 11,500 kg, total height: 2,650 mm, total length: 2,600 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT C6000 – 2014 | DIESEL | DUPLEX 4,600 mm | FORK POSITIONER | FREE LIFT ✅ Ready to Work from Day One – No Additional Investment Required Are you looking for a reliable forklift that keeps your operations running smoothly without unexpected downtime? This COMBILIFT C6000 has undergone a complete service, thorough inspection, and is prepared for immediate operation. Simply put it to work and focus on your business. ✔ Major service completed (oils, filters, and full component inspection) ✔ Excellent mechanical and cosmetic condition ✔ Only 7,472 operating hours – genuinely low usage ✔ New tires installed ✔ No hidden costs or immediate repair requirements 🔧 Key Specifications Capacity: 6,000 kg Engine: Kubota Diesel Mast Type: Duplex Lift Height: 4,600 mm Free Lift: 2,050 mm Fork Positioner: 1,300 mm Fork Length: 1,400 mm Enclosed Heated Cabin 📋 Technical Specification General Information Manufacturer: Combilift Model: C6000 Year of Manufacture: 2014 Operating Hours: 7,472 h Capacity: 6,000 kg Load Center: 600 mm Machine Weight: 11,500 kg Mast & Lifting Mast Type: Duplex Maximum Lift Height: 4,600 mm Free Lift: 2,050 mm Forks & Attachments Fork Positioner: 1,300 mm Fork Length: 1,400 mm Fork Sideshift Dimensions Overall Height: 2,650 mm Overall Length: 2,600 mm Overall Width: 2,800 mm Construction Height: 3,400 mm Tires Type: Super Elastic Nsdpfszphwmsx Am Teld Condition: New (100%) Front: 23x10-12 Rear: 400/60-15 Equipment ✔ Fully Enclosed Heated Cabin ✔ Fork Positioner ✔ Fork Sideshift ✔ Free Lift ⭐ Condition Mechanical Condition ✅ Fully serviced and workshop inspected Cosmetic Condition ✅ Refurbished and professionally prepared ✅ Corrosion-free ✅ Near-new appearance 🎯 Ideal For ✔ Narrow aisle warehouses ✔ Timber industry ✔ Steel and metal processing facilities ✔ Pipe and long-load handling ✔ Indoor and outdoor operations 💼 What You Are Buying This is not just a used forklift. You are investing in a machine that has been professionally prepared and tested for reliable operation. ✔ Comprehensive pre-sale inspection and testing ✔ Ready for immediate deployment ✔ Live online demonstration available ✔ Delivery directly to your facility available 🚛 Delivery & Customer Support ✔ Transport available throughout Europe ✔ Complete logistics support ✔ Leasing and financing assistance ✔ Professional after-sales support 🏆 Why Choose FT LOGISTICS? We supply forklifts that work — not machines that spend their time in the workshop. ✔ More than 100 machines available ✔ In-house service and refurbishment facilities ✔ Customers throughout Europe ✔ Hundreds of satisfied clients 📞 Contact Us Today FT LOGISTICS 🚜 Quality You Can Rely On. 🔧 Service You Can Trust. 🤝 Partnership for the Long Term.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,472 h, load capacity: 6,000 kg, lifting height: 4,650 mm, free lift: 2,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,300 mm, fork length: 1,400 mm, fork width: 150 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 400/60-15, overall weight: 17,500 kg, empty load weight: 11,500 kg, total height: 2,650 mm, total length: 2,600 mm, total width: 2,800 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT C6000 – 2014 | DIESEL | DUPLEX 4,600 mm | FORK POSITIONER | FREE LIFT ✅ Ready to Work from Day One – No Additional Investment Required Are you looking for a reliable forklift that keeps your operations running smoothly without unexpected downtime? This COMBILIFT C6000 has undergone a complete service, thorough inspection, and is prepared for immediate operation. Simply put it to work and focus on your business. ✔ Major service completed (oils, filters, and full component inspection) ✔ Excellent mechanical and cosmetic condition ✔ Only 7,472 operating hours – genuinely low usage ✔ New tires installed ✔ No hidden costs or immediate repair requirements 🔧 Key Specifications Capacity: 6,000 kg Engine: Kubota Diesel Mast Type: Duplex Lift Height: 4,600 mm Free Lift: 2,050 mm Fork Positioner: 1,300 mm Fork Length: 1,400 mm Enclosed Heated Cabin 📋 Technical Specification General Information Manufacturer: Combilift Model: C6000 Year of Manufacture: 2014 Operating Hours: 7,472 h Capacity: 6,000 kg Load Center: 600 mm Machine Weight: 11,500 kg Mast & Lifting Mast Type: Duplex Maximum Lift Height: 4,600 mm Free Lift: 2,050 mm Forks & Attachments Fork Positioner: 1,300 mm Fork Length: 1,400 mm Fork Sideshift Dimensions Overall Height: 2,650 mm Overall Length: 2,600 mm Overall Width: 2,800 mm Construction Height: 3,400 mm Tires Type: Super Elastic Condition: New (100%) Front: 23x10-12 Rear: 400/60-15 Equipment ✔ Fully Enclosed Heated Cabin ✔ Fork Positioner ✔ Fork Sideshift ✔ Free Lift ⭐ Condition Mechanical Condition ✅ Fully serviced and workshop inspected Cosmetic Condition ✅ Refurbished and professionally prepared ✅ Corrosion-free ✅ Near-new appearance 🎯 Ideal For ✔ Narrow aisle warehouses ✔ Timber industry ✔ Steel and metal processing facilities ✔ Pipe and long-load handling ✔ Indoor and outdoor operations 💼 What You Are Buying This is not just a used forklift. You are investing in a machine that has been professionally prepared and tested for reliable operation. ✔ Comprehensive pre-sale inspection and testing ✔ Ready for immediate deployment ✔ Live online demonstration available ✔ Delivery directly to your facility available 🚛 Delivery & Customer Support Nlodpfx Amszkk Svo Tod ✔ Transport available throughout Europe ✔ Complete logistics support ✔ Leasing and financing assistance ✔ Professional after-sales support 🏆 Why Choose FT LOGISTICS? We supply forklifts that work — not machines that spend their time in the workshop. ✔ More than 100 machines available ✔ In-house service and refurbishment facilities ✔ Customers throughout Europe ✔ Hundreds of satisfied clients 📞 Contact Us Today FT LOGISTICS 🚜 Quality You Can Rely On. 🔧 Service You Can Trust. 🤝 Partnership for the Long Term.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Lexmark XM5365” black-and-white production system Item for sale: Nlsdpfszpw Nfjx Am Tsd 1x Lexmark XM5365 with the following features: Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 2,931 Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of the device undergoing a functional test for you. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand black-and-white photocopier, the ‘Canon iR Advance DX 6860i’. Item for sale: 1 x Canon iR Advance DX 6860i with the following features: Includes duplex Includes ADF / R-ADF Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,063 pages Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: Njdszb Akajpfx Am Teld You are welcome to view the machine during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - Nsdpfx Amsvk R Are Teld - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Perfect-2 1350 RED-L Wide belt sanding machine incl. sanding version for intermediate sanding of coatings Special price for showroom machine - in-house trade fair machine - - Robust, space-saving W-wide belt sanding machine for the highest demands. - Constant working height thanks to adjustable upper part - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level can be adjusted continuously according to a sanding grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit can be tilted 10 degrees - Parallel, spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display Njdok Dpp Sopfx Am Told - Belt tension, control and oscillation are pneumatic - Compressed air consumption approx. 2 l/min - Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Over-thickness protection for workpieces with feed emergency stop and lifting mechanism - Continuously adjustable chip removal rate - Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Pass height 210 mm up to 18.5 kW - Sanding belt dimensions 1350 x 2000 mm Perfect - Equipment: High-quality, swiveling acrylic glass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and saving of sanding pad elements - Electronic compensation of sanding belt grit size - Operating and running hour counter Coating equipment: - Continuously adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included in the machine: Foldable outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" Nsdpfx Amsfig Rwo Tjld The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Nljdpfx Aozbyt Esm Ted Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. Nedehqb Rcepfx Am Tsld 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), Wide-belt sanding machine KÜNDIG Premium for finishing coats Type Premium 1 1100-C - used - constant working height thanks to adjustable upper section, combined unit with contact roller and sanding pad, contact roller with rubber coating, pneumatic activation of the contact roller, electronic segmented sanding pad, digital display for sanding height, automatic thickness adjustment, infinitely variable feed rate, automatic carpet centering, operation via touchscreen, belt cleaning, air-sprung sanding pad, sanding belt oscillation, Nljdjzkvd Rspfx Am Tod workpiece cleaning via compressed air nozzles, table extension at the infeed and outfeed, finishing coats possible ----- Technical data ----- Working width: 1,100 mm, Number of belts: 1 piece, Sanding belt speed: 3 - 15 m/sec., Feed rate: 3 - 15 m/min., Segment width sanding pad: 22 mm, max. workpiece thickness: 205 mm, min. workpiece thickness: 3.5 mm, Dust extraction port Ø: 180 /120 /100 /100 mm, Motor power: 11 kW, Dimensions (LxWxH): 1,660x1,700x2,250 mm, Weight: 2,150 kg Quality information: - Belt run / imbalance checked - Sanding pad checked / refurbished - Height adjustment checked - Complete thorough cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibrating and fine-tuning machine, wide-belt sanding machine Kundig Brilliant with electronic segment sanding pad, adjustable sanding unit, and finishing sander. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of painted surfaces. Edge banding machine with combination unit and electronic segmented pressure bar. Edge segments can be switched on and off. Segment width of the pressure bar is 22 mm (ideal for intermediate sanding of painted surfaces). Pneumatically adjustable calibrating roller, grooved, rubber-coated roller with grit adjustment. Drive motor 11 kW. Infinitely variable belt speed from 3 to 15 m/s via frequency inverter. Belt feed speed infinitely adjustable from approximately 3 to 15 m/min. Belt blowing device controlled by the workpiece. Constant table height of approximately 950 mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt is still in very good condition and has good grip. Carpet with adjustable vacuum blower, allowing small parts to be securely held. Maximum sanding width approximately 1100 mm. Workpiece height approximately 3.5 to 200 mm. Sanding belt dimensions 1120 x 2000 mm. Infeed and outfeed roller tables. Hood locking mechanism. Dust extraction connection 1 x 180 mm, 1 x 125 mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibrating roller, and parameters of the segment sanding pad. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment and feed triggering, eliminating the need for constant re-measurement with calipers. Programs for different sanding tasks can be stored and selected via smartselect. CE marking. Operating manual. 2 sanding inserts included. The four bellows have been renewed. Without the connection cable shown. Original paint, only a few spots have been touched up. Very good condition from a small company. Machine has approximately 1395 operating hours, i.e. approximately 2 hours per week. Dimensions approximately 1900 x 1650 x 2150 mm (L x W x H). Weight approximately 2300 kg. Includes a large, mobile storage table at the level of the belt, for storing the sanding belts. Nledpfxoyxg N No Am Ted Table size approximately 1520 x 1360 x 950 mm. Includes various sanding belts from K80 to K400. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Equipment and technical data: - Can be operated from both sides with a flat and a contact sanding surface - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW - Oscillating stroke programmable from 10-90 mm - Sanding head can be tilted motorically up to 45 degrees - CE compliant / dust tested Accessories: - Additional table with sanding rollers - Half-round table on the belt drive roller Nlsdpfx Amjzi Hags Tjd - Chassis LxWxH 1800x1000x1500 mm Weight 610 kg Location: in stock at warehouse 54634 Bitburg Availability: immediate

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our designated sales area in Germany (Rhine-Main region and North Rhine-Westphalia). Such enquiries will not be answered. Nledpfjzi Hwfox Am Ted Equipment and technical specifications: In intermediate lacquer sanding (Cd-L) configuration Robust, space-saving single wide-belt sander for demanding calibration and fine sanding tasks • Constant working height due to upper part adjustment • Working width: 1350 mm • Over-belt sanding with combination unit • Entire sanding unit inclinable up to 10° • Serrated rubber contact roller of proven hardness • Infinitely adjustable contact roller height according to a grain scale • Pneumatic lifting/lowering of the contact roller according to aggregate selection • Sanding pad with quick-release sliding insert • Parallel spring-loaded, ground steel pressure roller at the infeed • Rubberized pressure roller at the outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz, soft start for low current draw at startup • Electrically controlled, precisely adjustable height positioning with digital readout • Belt tensioning, control, and oscillation: pneumatic, compressed air usage approx. 2 l/min • Optimum safety thanks to automatic immediate stop with disc brake in case of belt break, belt drift, pressure drop, or opening of belt access door • Workpiece feed: 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum device for worktable with small parts section, fan integrated in machine frame • Complete electrical system with contactor control; automatic star-delta start of main motor, motor protection, and ammeter for chip removal monitoring • Pass-through height: 200 mm • Sanding belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the full working width • Workpiece overthickness protection with immediate feed stop and automatic lifting of machine upper structure • Stepless regulation of material removal • Electronic feed regulation on the control panel, stepless from 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory (one-touch based on sanding result, no input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: Fully automated rapid setup and feed activation (very useful for large workpieces) • eco* energy-saving mode • Error diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (swiveling special version) - Steplessly adjustable sanding belt speed (with program memory) - Ejector nozzles for sanding belt cleaning, demand-controlled, with additional extraction nozzle - Additional sanding shoe insert for lacquer sanding Including swiveling air knife, complete Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2007, machine/vehicle number: MR006928, Robust and precise wide belt sander with a working width of 1,100 mm. In good condition and ready for immediate use. This Kündig Premium-2 is a robust and precise wide belt sander, equipped with two sanding units: a calibration roller for efficiently sanding solid wood and sheet material to size, and a sanding shoe for a fine, uniform finish. This sander is in good condition and ready for immediate use. Technical specifications: - Number of sanding units: 2 - Sanding unit 1 type: Calibration roller - Sanding unit 2 type: Sanding shoe - Maximum sanding width: 1100 mm Nodpfxozh Hixs Am Teld - Maximum working height: 200 mm - Minimum working height: 3.5 mm - Feed rate: 3 - 15 /min - Sanding belt length: 2000 mm - Sanding belt width: 1120 mm - Serial number: 26453

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Features and technical data: - Double-sided operation with surface and contact grinding sides - Abrasive belt size: 200 x 2000 mm - Belt drive motor: 3 kW - Programmable oscillation stroke: 10–90 mm - Grinding unit motorized tilting up to 45 degrees - CE-compliant / Dust-tested Accessories: Nedpfxoxvnmns Am Tsld Semicircular table at the belt drive roller Dimensions (LxWxH): 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Availability: short-term

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Nodpeuhiq Dsfx Am Teld Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 2435059, total length: 1,500 mm, total width: 700 mm, total height: 1,450 mm, table height: 900 mm, type of input current: three-phase, table length: 1,000 mm, table width: 280 mm, height adjustment type: electric, input voltage: 380 V, grinding belt length: 2,580 mm, grinding height: 150 mm, Enorm (now Kündig) edge sanding machine in very good, used condition. LBK-D/solid – manufactured in 1995. The edge sanding machine was purchased from a dealer in 2022. The machine is being sold as part of the closure of our carpentry business. Price for pickup – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Njdpfxoziupio Am Told An inspection of the machine is possible by arrangement. Fixed inspection dates are July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. Nsdpfsw Naanex Am Teld The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Nlodpfx Amsx Rv Dye Tsd Work table: 400 x 1100 mm Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim

Condition: used, For sale: ENORM PRIMO – TOP CONSTANT THICKNESS MACHINE / automatic head positioning Wide-belt calibrating and fine-finishing machine Combined unit: contact roller and pneumatic sanding pad Enormatic Digital thickness display for workpiece thickness Belt drive motor power approx. 9 kW Contact roller pressure adjustable in infinitely variable steps according to grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed rate 2.5 - 15 m/min Machine is WORKSHOP OVERHAULED and in VERY GOOD CONDITION Machine comes from a craft business Available from stock in Lieboch Nljdpoznbnvsfx Am Tsd