Used Kaiser V 40 Whs for sale (49,017)

Condition: used, Year of construction: 1985, machine/vehicle number: 131 153, Press capacity: 40 ton Ppjdpfxsuqc Ags Adlor Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton Extended machine accessories

Condition: used, Year of construction: 1985, Technical details: Psdpou Icwgsfx Adlepr Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, Year of construction: 1990, machine/vehicle number: 131 542, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Ppedjuqc Ezopfx Adler Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton Extended machine accessories 2002 a roll feeder was installed Modell MWVL-200, YOM 2002

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t Pedpfx Adocb T Twjlepr - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 1997, Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Pjdpfovmfzhsx Adlopr Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5 Standard configuration hydraulic tool clamping device Extended machine accessories Tool changing cart

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm Pjdpfxeyx Ii Do Adlepr permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 1980, machine/vehicle number: 130861, Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Pjdpfxjuqc Hls Adlspr Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW Extended machine accessories IMCO Press force measurement Automation Grip Feeder, Type ZR18ZT1Max. Sheet width 180 mmFeeding length 150 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 131234, Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW Psdpfx Aow Tuqpsdlopr Extended machine accessories Die lifters with balls for die change IMCO Press force measurement Automation Grip Feeder, Type ZR 250Max. Sheet width 250 mmFeeding length 210 mm

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, pressure:63 t no. of strokes:400 Hub/min sheet width:180 mm stroke:10 - 80 mm feed length:150 mm band width:180 mm control:KAISER voltage:380 V dimensions of the machine ca.:1,85 x 2,70 x 3,00 m double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper feeder type ZR 18D, emergency cut-off, electric 2-hand operation, free-standing control Ppjdpecxxt Tefx Adlor panel

Condition: ready for operation (used), Year of construction: 2016, This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine. Additional information Workpiece • Lengths: 4000 mm for single placement / 2250 mm for pendulum placement • Widths: 1450 mm for all units and front stop • Maximum Workpiece Thickness: 300 mm (including clamping devices) • Up to 60 mm with standard clamps without restrictions for units and extraction. Table • Automatic Console Table • Automatically adjustable console table • 8 consoles Y = 1500 mm • 16 side and stop pins 140 mm, electromechanically controlled • Dynamic space allocation for optimal utilization in pendulum operation • Various double vacuum clamps • Without vacuum pump; supplied via a building-side vacuum system Tools • 18-fold disc tool-changer Main Drive • Processing Spindle: 12 kW (S6 operation) / 9.5 kW (S1 operation) • Spindle with hybrid bearings • Frequency-controlled rotation: rpm • Automatic feed reduction with decreasing spindle speed Pedpfx Adjx D Nzvolepr Injection Unit • POWEREDGE Gluing Unit • Gluing unit for 360° edge gluing on butt joints • Glue application via application roller onto edge material • 1 pressure roller Ø 50 mm, 1 follow-up roller Ø 35 mm • Max. edge height: 65 mm • Edge thickness: 0.4 - 3 mm (veneer 0.4 - 2 mm / PVC 1.0 - 2 mm) • Hot air nozzle for heating thick edges on small radii, controllable via NC Machine Control • POWERCONTROL PC 86 POWERTOUCH • With 21.5" Full-HD multitouch display • WoodWOP for graphical, dialog-oriented creation of CNC programs • Diagnostic system WOODSCOUT Additional Equipment • Interface for FLEX 5 unit • C-axis with unit interface • Unlimited swivel range • Coupling element for automatic tool change of FLEX 5 unit • Drilling Head • 21 spindles V17 / H4 / S0 / 90° • 17 vertical drilling spindles with quick-change system • T-shaped arrangement: 7 spindles in Y-direction / 11 spindles in X-direction • 4 horizontal spindles with saw 0 / 90° • Pre-cutting Station • Moves with the processing portal (X-axis) • Saw / Trimming Unit for Tool Changer • Combined trimming and corner rounding unit, sensor-controlled • Combined flush-trim / pull-knife unit Extra Information • Coolant tank for processing spindle • Integrated chip conveyor, discharging to the leftNote: The technical data and descriptions are for informational purposes only and are not binding.

Condition: good (used), Year of construction: 1996, GILLARDON GB 40 V Drilling capacity in ST 60: 40 mm Drilling capacity in GG 20: 50 mm Ppsdpfjylygmsx Adlsr Maximum drilling diameter in ST 60: 55 mm Right/left-hand rotation Thread cutting device Coolant system MK 4 taper Stepless spindle speeds: 140 - 1100 rpm 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev Distance table/spindle: 135 - 760 mm Distance table/baseplate: 1200 mm Table dimensions: 630 x 530 mm External dimensions approx.: 630 x 985 x 2020 mm with - Stepless speed adjustment - 3 automatic feeds

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, "HURON" system, swivels over 2 axes, every angle adjustable. Spindle taper: ISO 40 Reach approx. 360 mm Ppjdpedbny Ejfx Adler Designed drive power: 10 HP Max. speed: 1,800 rpm Weight: approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts and gears made of case-hardened and tempered chrome-nickel steel • 2 rotatable axes making every setting angle possible! "HURON" system • Tapered drives ground according to "KLINGELNBERG" system • Main spindle bearings made of high-precision tapered roller bearings • 1 tool drawbar • Operating manual Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), mileage: 50 km, power: 107 kW (145.48 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,590 mm, first registration: 04/2025, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, all-season tires, central locking, cruise control, immobilizer system, parking sensors, power assisted steering, sliding door, traction control, trailer coupling, = Additional options and equipment = - Apple CarPlay - Automatic dipped headlights - Heated exterior mirrors - Passenger bench seat - Third brake light - Electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Cruise control - Wooden loading platform - Height-adjustable steering wheel - Wireless charging function for mobile phones - Air conditioning - LED daytime running lights - Front centre armrest - Radio DAB MP3 Bluetooth 4.0 - Rain sensor - Spare wheel - Reversing camera - Side sliding door - Immobiliser - Blind spot monitoring - Heated windshield - Two rear doors - Partition wall - Partition wall without window = Further Information = General information Number of doors: 3 Cab: single Registration number: V-40-LRF Technical information Transmission: 6-speed automatic Maximum front axle load: 1,950 kg Maximum rear axle load: 2,100 kg Dimensions Length/height: L4H3 Dimensions (L x W x H): 569 x 208 x 250 cm Weights Kerb weight: 2,278 kg Payload: 1,222 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 2,000 kg (unbraked: 750 kg) Ppjdpfov Iqm Eox Adlor Interior Interior: grey Condition Technical condition: very good Visual condition: very good Number of keys: 2 (2 remote controls)

Condition: excellent (used), mileage: 22,800 km, power: 125 kW (169.95 HP), first registration: 04/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: grey, gearing type: automatic, number of gears: 6, emission class: euro6, number of seats: 5, total length: 5,480 mm, total width: 1,960 mm, total height: 1,940 mm, permissible axle load (axle 1): 1,625 kg, permissible axle load (axle 2): 1,650 kg, Year of construction: 2024, Equipment: ABS, Apple CarPlay, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, traction control, = Additional Options and Equipment = - Automatic dipped headlights - Heated exterior mirrors - Passenger airbag - Third brake light - Euro 6 - Driver airbag - Remote central locking - Cruise control - Wooden loading platform - Height-adjustable driver's seat - Air conditioning - LED daytime running lights - Front center armrest - Fog lights - Parking sensors - Rain sensor - Reversing camera - Immobilizer - Advertising (stickers applied) - Partition wall with window = Further Information = Ppjdpfx Asxx Uaasdlsr General Information Number of doors: 6 Cabin: double Registration: V-40-FSF Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Front axle: Max. axle load: 1,625 kg; Steering Maximum rear axle load: 1,650 kg Weights Unladen weight: 1,949 kg Payload: 1,121 kg Gross vehicle weight: 3,070 kg Maintenance, History and Condition APK (General Technical Inspection): valid until 04.2027 Technical condition: very good Visual condition: very good

Condition: ready for operation (used), Year of construction: 1996, Main Drive Number of axis 3 Spindle Speed 8000 RPM Tool taper BT 40 Tools Slots in storage 20 This 3-axis Leadwell V-40 was manufactured in 1996. It features a BT40 spindle, a 20-tool automatic tool changer, and a maximum spindle speed of 8,000 rpm. External coolant is provided at 2 bar. If you are looking to get high-quality milling capabilities, consider the Leadwell V-40 machine we have for sale. Contact us for more information about this machine. Application Types Milling Ppjdpfxsx S Si Uo Adlor

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Ppsdsyrt T Tspfx Adljr Machine type: horizontal baling press for paper and cardboard

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop Ppedpfxexab Rhe Adljr - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Benning, charger Belatron type E 220 G24/40 B-FB -Input voltage: 220V 50Hz -Power: 25.2V/40A Ppodsq Adp Hspfx Adljr -Quantity: 2x charger available -Price per piece -Dimensions: 550/410/H780 mm -Weight: 53 kg/pc.

Condition: good (used), fan, ventilator, blower -Manufacturer: Prein fan, fan ventilator, radial fan Pjdpfx Adeunn Hlelepr -Type: RES 85/42 -Voltage: 80 V / 40 W -Fan wheel: Ø 90 x 45 mm -Number: 2x blowers available -Price: per piece -Dimensions: 180/160/H140mm -Weight: 1.6 kg/pc.

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor Psdpfxecwqdfj Adljpr -comes from a Still forklift -Drive: 40 V 2.5 kW -Dimensions: 340/225/H300 mm -Weight: 32 kg

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control with ShopMill Travel paths X/Y/Z: 1020 x 635 x 610 mm Ppjdsvtcyujpfx Adler Spindle speed: 10,000 min-1 Tool magazine for 24 tools SK 40 IKZ Chip conveyor Measuring probe

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Ppedpew I Rxrjfx Adler Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Dunkermotoren 44714012200.5 Motor 40 V, used, normal signs of use, 100% functional, scope of delivery as per photos Psdoi D Hp Sopfx Adlepr

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20-NL-5012-2, Used Cabero GCHSD089MB/X7S-40 Y V dry cooler. Complete with 14 Ebm-papst W3G800-HG95-07 fans – 50/60 Hz – 0.9 kW – 770 rpm – 800 mm diameter, providing a total airflow of 214,700 m³/h. Also includes a control cabinet with Ziehl-Abegg UNIcon fan controller. Specifications: Brand: Cabero Model: GCHSD089MB/X7S-40 Y V Product type: Dry cooler Capacity: 428.9 kW Number of fans: 14 Fan speed: 770 rpm Coolant: Glycol Airflow: 214,700 m³/h Fan diameter: 800 mm Surface area: 3,428.3 m² Dimensions: 12,650x2,360x1,750 mm (LxWxH) Podpjx A Tyasfx Adlspr Year of manufacture: 2020 Stock: 1 unit

Condition: like new (used), 1 unused universal milling head in elevated version for subsequent mounting on conventional, NC or CNC milling machines or boring mills of any kind, system "HURON" swiveling over 2 planes, any angle adjustable spindle mounting ISO 40 Pjdpfobpmw Nex Adlepr projection approx. 360 mm D8ot3uy designed drive power 10 HP max. speed 1800 rpm weight approx. 82 kg Accessories / special features: - With adapter plate in elevated design with additional helical gear wheel - Tool clamping manual - The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel - 2 mutually rotatable axes, thus any setting angle is possible! HURON" system - tapered engagements are ground according to the "KLINGELNBERG" system - rolling bearings of the main spindle are made of conical high precision rollers - 1 drive gear with helical teeth - 1 tool tightening screw - Instruction manual Delivery time: immediately, subject to prior sale Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel