Used Kiefel Ag Kmw 75D for sale (6,211)

Year of construction: 2004, condition: ready for operation (used), Connected load: 104kVA, operational hours counter: 18,775h, the chain of the chain rail system was replaced in 2018. Bwjdpfx Ael Ax Tvon Njn

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Bedpswkkpqefx An Nswn Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Bjdpfx Anjy Ryrnj Nswn Specifications: Capacity: 13,400 L

Condition: used, Frei AG Laquer Curing Tunnel Please note the items in this lot 30466-430 are simultaneously offered in the combination lot 30466-425 as a complete line. The separte parts of the complete line 30466-425 are offered as individual lots 30466-426 to 30466-433 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. Bsdpfx Aney Ux Rqs Nswn It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: used, This listing is for Stratec Gemini 6280 Compact Microplate Processor The unit is in full working condition and ready for immediate use The Stratec Gemini 6280 is a fully automated microplate processor optimized for low to mid-throughput ELISA assays. It seamlessly integrates sample pipetting, incubation, washing, and photometric reading into a space-saving, walk-away platform. Equipped with barcode tracking and intuitive software, it ensures exceptional process safety and reproducible results for clinical and research laboratories Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](), [2]()] Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform full diagnostic assay validation • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Bwsdpfx Aozavi Tjn Non

Condition: used, Year of construction: 2002, Kiefel KMD 75 BFSS Universal Automatic Roll-Fed Thermoforming Machine, Forms, Punches & Stacks Formed Containers, Sheet Width Approx. 700mm, Infeed Roll Feeder KVH83, Oven, Machine Platen Size 590 x 900mm, Outfeed Scrap Reel, ICS IC410 3 Fan Chiller Unit. Serial No. 203-031 (2002). Country of Origin: Germany Bsdey Shbyjpfx An Newn Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm Bedpozavqwofx An Njwn C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2010, functionality: fully functional, Complete KMW welding + deburring line with a turning table. 1 KMW brand 4-head welder for PVC window profiles, with an additional output conveyor. 1 Automatic deburring machine with a transfer table and automatic turning function, KMW brand. Programming is done directly on the machine via software that allows for visualization of the profiles and the overlapping of machining operations. Bedpfx Anjy U T Iqe Njwn In good working condition. Manufacturer's documentation is provided, including electrical diagrams, pneumatic diagrams, and the user manual.

Year of construction: 2014, condition: like new (used), functionality: fully functional, Unique bending roll machine with servo drive, fully CNC controlled. Bwodsy S Sx Aopfx An Nsn

Condition: used, Technical details: dimensions electric cabinet LxWxH: 1,6x0,6x2,0 m connected load: 2x11 kW connected load: 2x15 kW electric cabinet - revolution regulator application: - pump - rack system with stepless rpm adjustment application area: - heating/air conditioning /climate , water supply , heat exchanger , recycling plants , fountains , pump drive via AC motor - control device 89 MA relais output 220V / 1A - display via control unit with micro computer Bwjdpfx Asu N Eytjn Nen - equipped with differential pressure indicator i.D. *

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Cummins KTA50-G23, General information Field of application: Construction Weights Empty weight: 13.396 kg Bjdpfx Ansyzwm Rs Newn Functional Generator capacity: 1.875 kVA Dimensions of cargo space: 602 x 259 x 333 cm CE mark: yes Other information Fuel consumption: 291 Liter / Hour at 75% Load Generator: Stamford S7L1D-F4 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel

Condition: new, functionality: fully functional, machine/vehicle number: 005119, Year of construction: 2016, Equipment: documentation/manual, Slewing arm – spare part – König Loader KA SL260 Bsdpfx Asx Tqhljn Nown Complete new 25x25 KA-SL V4 thread drive with mounting parts for a loader for the lifting movement of the slewing arm – automation of the production machine (Reishauer) Koenig Automation AG – Switzerland, Item 005119 new and unused – procured as a spare part Price / details on request. All technical information is subject to typing errors/mistakes. We sell exclusively to countries of the European Community.

Condition: refurbished (used), functionality: fully functional, rotational speed (min.): 1,450 rpm, rotational speed (max.): 1,750 rpm, Refurbished Landert Motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Grinding auger drive) Price: € 1,350 net ex-location, plus packaging costs Bodjw Rn Hxspfx An Nswn All technical specifications are subject to errors and omissions. Sale exclusively to EU countries.

Condition: used, For sale is a used gearbox from our stock: • Manufacturer: ZF (No type plate available) • Model/Type: Duoplan 2K300 • Housing number / casting number: 4161 111 065 Bodpfjy Tht Ssx An Njwn • Type plate: Not available (type identification based on casting number) • Condition: Used / untested Condition description: The gearbox is in visually flawless, very good condition. For logistical reasons, we unfortunately do not have the possibility to technically inspect the gearbox in-house. Therefore, the sale is expressly made in its current condition ("as is") as an untested item and with the exclusion of any warranty. Advantages & Service: • Immediately available from stock • Inspection on-site is possible at any time by prior arrangement • Quick loading with a forklift is no problem for us • We reserve the right to sell the item to another buyer.

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Bwjdpfsu Thpnex An Nen Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Year of construction: 2012, condition: repair required (used), functionality: limited functionality, Fully automated test bench for testing fuel cell components Max. output 500 W (max. current: 100A, max. voltage: 35V) Gases can be temperature-controlled, humidified and pressurized; nitrogen purging available Anode: 0.04-2 Nl/min hydrogen, cathode: 0.1-5 Nl/min air or 0.02-1 Nl/min oxygen Includes power cable, proprietary Testwork® software from the manufacturer, measurement PC Bwsdpfeytr R Hox An Nsn Central control unit (PLC) defective

Year of construction: 2011, operating hours: 35,000 h, condition: ready for operation (used), This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details. • Operating voltage: 3 x 400V + N + PE / 50 Hz • Connected load: 225 kVA • Nominal current: 264 A • Preliminary fuse: 315 A • Short-circuit strength: 50 kA • Control voltage: 24 VDC • Max. forming area: 860 x 2350 mm • Min. forming area: 340 x 1200 mm • Max. forming part height: 350 mm • Film level: 1805 mm • Max. lower table stroke: 1330 mm • Max. upper table stroke: 585 mm • Rotary upper table: 4-part (Forming / Punching) • Punching force upper table: 30 kN • Punching counterforce lower table: 30 kN • Operating pressure: 6 bar • Compressed air requirement: approx. 300 Nl/cycle Bsdey Rprqspfx An Njwn • Max. roll diameter: 600 mm • Max. film width: 1100 mm • Max. film roll weight: 400 kg • Coil diameter max: 76 mm • Vacuum system suction power: 2 x 300 m³/h • Vacuum system power: 7.6 kW • Tank volume: approx. 1000 L • Side channel blower suction: 14 m³/min • Side channel blower power: 8.5 kW • Feed width chain rails: max. 940 mm

Condition: good (used), Year of construction: 2006, AKL, Dematic / Siemens, approx. 19,450 box storage locations, boxes approx. 600x 400m x 320mm - : Price ex location: 109.000.-€ (net), plus dismantling etc.! Manufacturer: Siemens AG, Logistics and Assembly Systems, Distribution and Industry, 58300 Wetter/Ruhr Type: AKL Year of manufacture: 2006 Device type: Dematic SR-M100/1 Dimensions of the system: Length x width x height: 32,282 x 15,015 x 7,064 mm Storage locations: 19,450 units Number of appliances: 3 pieces Bwodpfx Aetw Diien Non Payload: 2x50 kg Loading units (max. dimensions): 600x400x320 mm Travel speed: 200 m/min Lifting speed: 120 m/min Extension speed: 100 m/min Condition: good Available: 4th quarter 2024 Location: 89584 Ehingen (Danube)

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Bjdoy St Urepfx An Nswn

Year of construction: 1995, condition: ready for operation (used), Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible. Bjdpfx Ansy Tx Sxj Nswn

Condition: new, Year of construction: 2025, machine/vehicle number: G25D012870, fuel type: diesel, power: 1,340 kW (1,821.89 HP), motor manufacturer: Cummins KTA50-GS8, General information Field of application: Construction Weights Empty weight: 10.293 kg Functional Generator capacity: 1.675 kVA Dimensions of cargo space: 578 x 204 x 252 cm CE mark: yes Bwodpfxsxbwuxs An Njn Other information Fuel consumption: 253 Liter / Hour at 75% Load Generator: Stamford S7L1D-D4 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Production country: UK Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Bedsy St Skjpfx An Nown Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Year of construction: 2010, condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 200708 Year of construction: 2010 L/s: 2,77 1/min: 1800 m: 14,7 Connections: DN50 and DN65 length: 182cm quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Number: 0883082001004H kW: 5,5 Bsdpfx Aogbflusn Njwn V: 400 / 690 A: 11,8 / 6,85 rpm: 1425 For further data see type plate

Year of construction: 2010, condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Number: T 202000 Year of manufacture: 2010 L/s: 2,77 1/min: 2390 m: 26,5 Connections: DN50 and DN65 length: 192cm Quantity: 1 Motor: Manufacturer: VEM motors GmbH Year of construction: 07/2010 Type: K21R 160M 2 FD TWS HW Number: 178086/0001 H kW: 11 HP: 15 V: 400 A: 20 1/min: 2900 Bwodpfogbflmsx An Njn For further data see type plate

Condition: not inspected (used), functionality: limited functionality, load capacity: 1,200 kg, lifting height: 2,800 mm, load center: 600 mm, Equipment • Electric drive for travel and lifting • Tiller control Bwjdpfx Anjy Rh Uqe Nsn • Compact design, highly maneuverable • Ideal for pallets, beverage crates, production material Condition Unit is basically functional. Battery is defective and needs to be replaced or refurbished. Hydraulics, mast, and drive are functional based on last use. Significant signs of wear. Battery Industrial battery is present, but no longer operational. Ideal for buyers with their own battery or technical expertise.