Used Krones Ag 0,2-1,0 L Körbe for sale (66,239)

Condition: used, Year of construction: 2002, Diatomaceous earth filter based on the Twin Flow system. The diatomaceous earth filter has recently undergone a complete mechanical and electrical overhaul and has been equipped with additional measurement technology. Additional title: Twin Flow-System Surface of filtration: 25 m² Capacity of filtration: 200 hl/h Max. operating pressure: 9 Number of candles: 135 candles Systemic volume: 976 Liter Width: 1,1 m Bodpfx Aoziy Spsm Tolk Height: 3,85 m Weight: 500 kg Operation / Control: Simatic S7-300, SPS-Typ = S7-314C-2 DP, HMI = ProTool und WinCC flexible Material: stainless steel Features: Diatomaceous earth dosing, PVPP dosing (with stainless steel mixing tank and peristaltic pump), turbidity measurement (Sigrist), flow measurement (E+H), oxygen measurement, automatic sampling, control system, touch panel, fittings, valves, sensors Periphery: Pre-/Postrun tank 60 hl max. 5 bar, non-filtration tank 61,5 hl max. 5 bar, filtration tank 10 hl max. 5 bar, Additiv-dosing, Securox Partikelfilter, Pall Partikelfilter

Condition: used, Year of construction: 1995, Capacity: 20000 l/h CO2 connection pressure: 10 bar Current: 69 A Bedpfxsvcqwgj Am Tjlk Voltage: 230/400 V Frequency: 50 Hz Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar Water: Connection pressure: min. 4, max. 5 bar Compressed air: min. 7, max. 10 bar Length: 2 m Width: 2,4 m Height: 2,5 m Weight: 4000 kg Operation / Control: Siemens Simatic S5 Features: Saturation Tank (d = 750 mm) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Bsdpfxer Igtyj Am Telk Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: used, Year of construction: 1990, Bottle washing machine MAG Sirio 8 3,000–11,000 bottles/h Bottle size: 0.2 l – 1.0 l Year of manufacture: 1990 Fully operational, runs until March 2026. Bedpfx Amjx N I Ego Telk

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. Blsdpfjxtvb Uex Am Tok The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: excellent (used), Year of construction: 2018, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 0,2-1, conveyor belt thickness: 1 mm, coil weight: 5,000 kg, conveyor belt width: 1,000 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness steel (max.): 1 mm, blade shaft diameter: 100 mm, load capacity: 5,000 kg, space requirement height: 3,000 mm, Slitting line for longitudinal cutting of thin strips from 0.2 mm. We mainly processed 0.2 or 0.3 mm material. Decoiler 5t with an inner diameter of 510 mm, recoiler with an inner diameter of 200 mm. The line is operational and can be tested. Operator training can be provided. Bsdpeynut Hsfx Am Tolk

Condition: used, Year of construction: 2020, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :420 mm Travel distance Z: 370 mm table size X: 750 mm table size Y: 550 mm max. workpiece size X: 950 mm max. workpiece size Y: 740 mm max. workpiece size Z: 450 mm max. electrode weight: 50 kg max. workpiece weight: 1500 kg electrode changer: 32 - time C-axis generator: 60 Ampere cooler drop tank C-Axis 32-position Electrode Changer Bledjzg T Ewspfx Am Tsk

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,390 mm, total width: 2,615 mm, wire diameter (max.): 0.3 mm, table width: 710 mm, overall weight: 5,200 kg, table length: 1,050 mm, table load: 1,000 kg, controller manufacturer: SODICK, controller model: LP20WH, product length (max.): 2,740 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Sodick AG 600 L wire EDM machine was manufactured in 2011. It features a maximum workpiece size of 800 × 570 × 340 mm and a robust table size of 1,050 × 710 mm. With a wire feed speed of 20 mm/s and a dielectric tank capacity of 800 L, this machine is designed for precision and efficiency. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AG 600 L machine we have for sale. Contact us for further details. • Type of drive: Linear motor drives • Power consumption: 10.5 kVA (max. 13 kVA) Blsdszi Ayvopfx Am Tek • Maximum workpiece size: 800 × 570 × 340 mm • Taper angle: ±25° (at 100 mm workpiece thickness) • Wire tension: 3–23 N • Wire feed speed: 20 mm/s • Dielectric tank weight (empty): 600 kg • Filtration system: Replaceable filter (3 internal pressure filters) • Deionizer: Ion exchange resin (18 L container) • Required floor space: 3,700 × 3,900 mm • 60 A generator • Super Pika 0.1 Ra finishing circuit board • Automatic wire threader/cutter • Wire feeder unit for spools up to 50 kg

Condition: used, mileage: 1,000 km, power: 375 kW (509.86 HP), first registration: 10/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #391 Mercedes-Benz AROCS 3545 L 8x4 B13 Kroll K 1.0-18.0 /36PESP, Suction Unit This Mercedes-Benz Arocs 3545 L 8x4 is equipped with a powerful KROLL suction/pressure tank superstructure of ADR class L4BH. With a tank capacity of 18,000 liters, VacuStar W1600, Speck P52/100-150, and hydraulic tank equipment for 18,000 L, this vehicle is ideal for demanding industrial, sewer, and emulsion suction applications. A robust suction system for professional operations. Superstructure Bedpfx Ajx Egx Uem Tolk * Manufacturer: KROLL * Tank Material: S355J2+N (St 52.3) * ADR Suction/Pressure Tank K 1.0–18.0 / 36PESP * Tank Volume: 18,000 L (air volume) * Sludge Volume: 15,000 L * Emulsion Chamber: 3,000 L * Rinse Water Chamber: 1,000 L, non-pressurised * Discharge via robust ejection piston Vacuum System * CVS VacuStar W1600 – approx. 1,550 m³/h at 400 mbar * Approx. 30 m DN80 suction hose mounted on the tank lid, can be fully cleaned through High-Pressure System * Speck P52/100-150 – 100 L/min at 400 bar * Small hydraulic HD hose reel for 60 m DN13 * Equipped with approx. 60 m cleaning hose DN13 Special Features * ADR L4BH, incl. EX/II, EX/III & AT * Remote-controlled suction inlet for pre-chamber DN100 * Manhole DN500 (left side) * High-pressure gun * Soundproofing enclosure left and right in front of the pumps * Removable, swiveling halogen work lights * LED perimeter lighting * Radio remote control (including 2 batteries) * Tiltable scrap box * Reversing camera * Ladder with bracket and anchor points * Advertising boards left and right on the tank Technical Data * Gross vehicle weight: 32,000 kg * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Conclusion A high-performance Mercedes-Benz Arocs 3545 L 8x4 with large 18,000 L KROLL suction body, VacuStar W1600 and Speck P52 high-pressure system. Ideal for industrial, sewer, and emulsion suction projects requiring high durability and reliable technology. For further detailed information and pictures, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively on our general terms and conditions and under exclusion of any warranty.

Condition: excellent (used), Year of construction: 2006, Conveyor belts L 3.0 meters W 0.60 meters H 0.50 meters Black section L 1.0 meters L 3.0 meters W 0.60 meters H 0.50 meters Black section L 1.0 meters Bodpfx Amjltnh Ee Tslk W 0.60 meters H 0.50 meters

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Specifications: Bsdpfx Ajy Ryrnom Tolk Capacity: 13,400 L

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KRONES SPIRIT / WHISKY COMPLETE FILLING LINE CONDITION IS EXCELLENT 500 BPM 700ml / 750ml / 1000ml YEAR 2003 KRONES ISOFILL VARIOJET 108 HEAD FILLER - 72 HEAD RINSER ZALKIN 18 HEAD CAPPER KRONES TOPMATIC LABELLER KETTNER CASE PACKER / DE-PALLETISER / PALLETISER PLUS MUCH MORE PRICE GBP £155,000.00 EXW Bedpfxjzn N T He Am Tjlk CONACT INDASSOL NOW FOR DETAILS

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each Bedpszl E Stefx Am Tjlk The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars Bodpjzl E N Eefx Am Tolk 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2004, OVERVIEW This Krones KES-2-4-312/25-110 bottle washing machine is designed for the industrial washing of returnable glass bottles in beverage production lines. The machine is equipped with 25 bottles per row and has a rated capacity of up to approx. 28,000 bottles per hour. The machine can process bottle formats from 300 ml up to 1,000 ml, making it suitable for breweries, mineral water producers, soft drink producers and other returnable bottle operations. The washing machine is mainly built in stainless steel, with an insulated stainless steel caustic bath and steam heating system. The machine will be delivered completely reconditioned. The reconditioning scope includes the bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel. A test run is also included. The machine is offered with Siemens S7 PLC control and is available as a reconditioned machine at a special price. TECHNICAL DATA - Manufacturer: Krones - Type: KES-2-4-312/25-110 - Machine Type: Bottle washing machine Bedpfx Amoy Ul N Hs Tolk - Year of Manufacture: 2004  - Capacity: approx. 28,000 bottles/hour  - Bottle Rows: 25 bottles per row - Bottle Formats: approx. 300 ml up to 1,000 ml - Control System: Siemens S7 PLC - Heating System: Steam heating - Construction: Mainly stainless steel, insulated stainless steel caustic bath - Bottle Cell Pitch: 110 mm - Machine Cell Material: Polypropylene - Bottles per Carrier: 25 pcs - Total Bottle Carriers: 274 pcs - Minimum Control Range: approx. 12,000 bottles/hour - Maximum Control Range: approx. 35,000 bottles/hour - Electrical Supply: 400 / 230 V, 3-phase, 50 Hz - Control Voltage: 24 V DC - Empty Weight: approx. 45,000 kg - Operating Weight: approx. 87,000 kg - Machine Length: approx. 11,766 mm - Machine Width without Attachments: approx. 3,136 mm - Machine Height without Floor Clearance: approx. 3,200 mm - Water Consumption in Operation: approx. 6.38 m³/h - Water Consumption per Bottle: approx. 0.22 l - Main Chain: approx. 4 years old, will be reconditioned - Reconditioning Scope: Bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station and electrical panel - Test Run incl. - Delivery Terms: EXW, unpacked

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor Bedey Tn D Dopfx Am Tslk - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Blsdpfey Azv Sjx Am Tok - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: used, Year of construction: 2000, Overview Bodpoy Azu Uofx Am Tolk This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: used, Year of construction: 2015, Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: Empty bottle inspector - Year of manufacture: 2015 - Capacity: up to approx. 15,000 bottles per hour and more  - Rejection system: 3 × Ecopush (1 × infeed, 2 × discharge) - Suitable for glass types: brown glass, green glass, flint (white glass) Formats - NRW bottle 0.5 l - 0.33 l swing-top bottle (Steinie, green) - Euro bottle 0.5 l - 0.33 l water bottle (individual) - 1.0 l water bottle (individual) Equipment - 3 × Ecopush rejection system (1 × infeed, 2 × discharge) - Base inspection system Bljdpfx Amoy Azq Nj Tsk - Foil detection (base and sidewall) - Sealing surface inspection (4 MP camera) - Thread inspection - Sidewall inspection with 4-camera system (infeed and discharge) - High-frequency caustic detection - Infrared residual liquid detection - Contour detection before infeed

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. Bjdoyx I Awjpfx Am Telk The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of January 2025. Spare parts documentation is available.   Technical Data Manufacturer: KRONES Model: Topmatic Year of manufacture: 2011 Machine type: Rotary cold glue / hot glue labelling machine Bottle plates: 36 Capacity: up to 33,000 bottles per hour Direction of operation: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Operating hours: approx. 44,350 h (as of January 2025) Labelling stations: - 2 labelling aggregates - 1 × Neck and front label station Bsdsyt Iltspfx Am Telk - 1 × Back label station (disengageable)   Glue system: - 2 glue pumps - Hot glue for neck label (tamper-evident / closure sealing) - Cold glue for front and back labels - 1 spare hot glue unit included Dimensions: - Depth: 4,300 mm - Width: 3,300 mm   Electrical supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and stored  

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. Blsdpsytvyfsfx Am Tok The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Year of construction: 1998, Overview This Krones Sensometic beer filling system was manufactured in 1998 and was previously installed in a high-capacity beverage bottling line. The machine is designed for the isobaric filling of beer and is equipped with 77 filling valves, enabling high-throughput production. The filler is configured as a filling and capping block and includes two capping units: one for screw caps and one for crown cork closures. Both capping systems are equipped with 12 capping heads, and the closure sorting systems are integrated on the machine. With a designed line capacity of approximately 33,000 bottles per hour, the machine is suitable for large-scale returnable glass bottling operations. The system supports a wide range of bottle formats typically used in the beer industry. Bjdpfx Asytqzwom Tslk Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filling machine with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper – 11 heads - Crown cork capper – 11 heads Closure handling: - Integrated closure sorting systems on the machine Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data - Capacity: Not provided - Formats: - 0.75 L Gourmet bottle - 0.25 L Gourmet bottle - 0.25 L Vichy bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems: - Base inspection (camera) - Sealing surface inspection - Thread inspection (conical optics) - Mouth / finish inspection - Sidewall inspection with LED illumination Blodpfxsythzns Am Tjk - Detection of transparent films on bottle base and sidewall - Scuffing detection via sidewall camera - Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit - Transport height: approx. 1,050 mm - Direction of operation: Left machine

Condition: used, Year of construction: 2011, Overview This self-adhesive labelling machine was manufactured in 2011 by the German company KRONES. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. We dismantled it properly and store it in our warehouse.    Technical data - Labelling method: Self-adhesive - Capacity: Up to 42,000 bottles/hour - Number of Autocol stations: 6 Bodpfxsytcyfj Am Tjlk - Bottle formats: - 0,25 l Heineken - 0,33 l Heineken Food - 0,65 l Heineken - 0,33 l Desperados - 0,65 l Desperados