Used Lns Bar Loader Magazine for sale (18,658)

Year of construction: 2001, condition: used, Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power. Hodpfoz Egffox Al Aju

Year of construction: 2008, condition: ready for operation (used), A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible. Hjdjzf Nb Eepfx Al Aou

Condition: ready for operation (used), Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible. Hjdpjy D Tn Asfx Al Aeu

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Hodpfx Aljzzdyhe Asu

Year of construction: 2007, condition: ready for operation (used), An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026. Hedpfszgwxzsx Al Aou

Year of construction: 2005, condition: ready for operation (used), Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible. Hedpfx Alswt Tk Ne Aju

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Hjdpfx Ajy Ax Tuol Asu

Year of construction: 2004, condition: good (used), Bar loader magazine: IRCO ILS RBK 10016 Year: 2004 SPECIFICATIONS Bar capacity: 5 - 100 mm Bar : 1200 mm Hedpfozkbtwsx Al Aou

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Hedozrn Htspfx Al Aeu

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 14-250 001, workpiece diameter (max.): 80 mm, Title: Short Bar Loading Magazine FMB SL 80 S – Year of Manufacture 2004 – including accessories & forklift loading Description: Due to a change in our production processes, we are selling our FMB SL 80 S short bar loading magazine. The machine has operated reliably in our production up until now and is no longer needed due to the changeover. •Manufacturer: FMB •Model: SL 80 S •Year of Manufacture: 2004 •Bar Diameter: 10 – 80 mm •Condition: Used Hsdpjz Eh Unsfx Al Asu Scope of Supply & Accessories: •Connection cable to the lathe (interface) is directly attached to the machine. •4 different sliding bars / feed bars for different material diameters are included. Loading & Logistics: •A forklift is available on site. •We will assist with loading onto your truck or the shipping company’s vehicle free of charge. Terms of Sale: The sale is exclusively to commercial customers (B2B) and is subject to the exclusion of any warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Robot Gantry Loader / Bar Loader. Hodpfx Alezuxwuj Aou • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader-type robot for part loading and unloading. • 1.5-meter CNC bar loader. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool motor: 4 kW. • Spindle size: A2-6. • Maximum machining diameter: 370 mm. • Maximum machining length: 920 mm. • Bar feed: 67 mm. • Prismatic guides on all axes. • Two 250 mm Kitagawa hydraulic chucks on each spindle. • Separate compartment for inspecting machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load control and tool wear monitor. • Part transfer system between spindles with automatic torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and programming. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear hinged chip conveyor. • Complete set of static tool holders for external and internal operations included. • Complete set of motorized axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate delivery, unless sold prior to listing.

Condition: used, Year of construction: 2018, LNS HYDROBAR HS 6.65 HS4.4 Year of manufacture: 2018 Condition: excellent Hedpszqc Ensfx Al Aeu DIAMETER RANGE: 2 – 68 MM

Condition: used, Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed. The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters). Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system. The advantages of CMSP/CMSPF barfeeders at a glance: Hedpfx Aloft Ti Ts Aeu - short loading time - optimal guiding of the bar material by double or, if necessary, triple centring device - no oil flooding - dry running - quick change of the diameter to be machined - short design - space saving - very low wear of the guide channel - self-adjusting centring device - significant reduction of vibrations Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, Year of construction: 2024, functionality: fully functional, control type: CNC control, bar length: 3,000 mm, bar diameter (min.): 3 mm, bar diameter (max.): 26 mm, We offer two new LNS bar loader magazines, model LNS GT 326. Hedpfx Alezl S Nro Aju The mounting side is on the right.

Condition: used, Year of construction: 2009, machine/vehicle number: IntNr2314500, A proven, high-performance bar loader magazine, LNS, type Hydrobar 6.42 HS-4.6, is for sale. Technical data Manufacturer: LNS (Switzerland) Model: Hydrobar 6.42 HS-4.6 Year of manufacture: 2011 Working range (diameter): Ø 6 mm to Ø 42 mm Max. bar length: 3,000 mm Guiding principle: Hydrobaric (complete oil bath) Feed drive: Hydraulic Oil capacity: approx. 150 - 170 liters (HLP 46 or equivalent) Total length of the magazine: approx. 4,850 mm Weight (empty): approx. 650 kg The machine can be inspected in operation by prior appointment. Hsdpfx Alez E Rags Aou Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery Hedpfezqgikex Al Asu only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2023, condition: used, Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm bar length: max. 1500 mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel Hodpsy Ndg Hjfx Al Aou - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2008, bar length: 2,100 mm, bar diameter (max.): 85 mm, overall weight: 1,000 kg, Bar diameter Ø 8-80 mm 7-65 mm Magazine capacity 270 - 320 mm (360 kg max) Minimum bar change time 27 sec Feed rate 150 mm/sec, adjustable Return speed 950 mm/sec Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 1000 kg Hjdpfx Aow Iwi Rjl Asu

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Hsdpow Rfkbofx Al Aeu Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Hedpfjzk E Irex Al Aou Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm

Year of construction: 2022, condition: ready for operation (used), Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible. Hedswcf R Topfx Al Asu

Condition: excellent (used), Year of construction: 2018, Bar loader for multi-spindle lathe 6 spindles last mounted on Gildemeister AS 16 / AS 20 Hjdpfxjp Du Alo Al Aeu Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Condition: good (used), Year of construction: 1998, Bar feeder Breuning IRCO ILS RBK 7212 Hsdpfey Ez Exjx Al Aju Technical data: Type: ILS RBK 7212 Year of manufacture: 1998 Connection: 400 V Power: 1 kW Material diameter: approx. Ø 12–72 mm Bar length: up to approx. 720 mm (short bar feeder) Automatic feed Scrap piece ejector present Control panel with controller Accessories: Comprehensive set of guide channels (various diameters) Additional pusher rods Documentation available Various spare parts (see photos)

Condition: ready for operation (used), bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Hedpfew Rb Rqex Al Asu Installed power 3 KW Compressed air 6 bar Weight 900 kg

Year of construction: 2003, operating hours: 18,000 h, condition: used, functionality: fully functional, Bar feeder with automatic bar feeding system for bars with a diameter of 3 to 32 mm. It was functioning perfectly until it was replaced with a newer model. It is not possible to see it in operation because it is not connected to the CNC machine. For information on troubleshooting and maintenance, please contact Italmatic, which is the product’s representative in Spain. Hsdpfx Alezrw Due Aju