Used Log Turning for sale (9,845)

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, Roundwood orienter with lower cutter. After repair. Kljdpfswx I D Uex Al Nju

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. Kledpfx Aswkdt Nel Nou The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available.

Condition: good (used), length 5 meter. working diameters 220 mm - 600 mm Kljdpov Scfzefx Al Nou

Condition: used, SPRINGER revolver log turner Kodjzdq N Iopfx Al Njlu

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Ksdpfx Ajxg Rvgol Nslu

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm Kjdpfx Ajxz R Niol Nelu - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm Kjdeu Smq Sspfx Al Nelu - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis. Kjdpsy I Nugsfx Al Nelu

Condition: ready for operation (used), Year of construction: 2001, operating hours: 42,400 h, functionality: fully functional, travel distance X-axis: 800 mm, spindle speed (max.): 5,000 rpm, turning length: 300 mm, spindle bore: 79 mm, controller model: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel range X-axis: 800 mm Travel range Z-axis: 300 mm Speed range main drive: 20 - 5,000 rpm Speed range C-axis: 0 - 100 rpm Spindle bore: 79 mm Torque main drive: 200 Nm Torque at the spindle: 240 Nm Torque clamping device: 28 Nm Rapid traverse X-direction: 100 m/min Rapid traverse Z-axis: 45 m/min Tools and tool magazine Number of positions in the tool magazine: 12 Speed of powered tool max.: 6,000 rpm Tool holder: VDI 40 Clamping area in the work area (W x H): 340 x 430 mm Number of T-slots according to DIN 650: 7 MACHINE DETAILS Control model: Siemens 840D Power main spindle: 27 / 20 kW Total power consumption: 50 kVA Electrical version - voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle operating hours: 42,400 h Power-on hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading device with 20 stations Power chuck (225 mm) Hydraulics Klsdezb Efgopfx Al Neu 6x various turning tool holders 2x various tool holders (rotating)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Kedpsza Alhjfx Al Nolu Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Kjdpfxszck Txe Al Njlu Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Klsdezdqdfopfx Al Neu Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Kodpfx Aszcwylel Nolu Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: excellent (used), Year of construction: 2020, 2020 Vulcan TC250M CNC Turn/Mill Slant Bed Lathe With Fanuc Series Oi-TF Plus Control Klsdpfx Aozfqflel Nju Auto Strong N-210 Ø250mm 3 Jaw Power Chucks. Swing Over Bed Ø600mm. Maximum Turning Ø316mm. Working Length 435mm. Spindle Bore Ø77mm. Bar Capacity Ø65mm. Axis Travel 'X'=185mm, 'Z'=490mm. Rapid Traverse 'X'=30m/min, 'Z'=30m/min. Cutting Feed Rate 0.001-500mm/rev. Speed Range 25-3,000rpm (11/15kW Motor). Spindle Nose A2-6. Driven Tool Speed Range 25-4,000rpm. Sauter 12 Position Turret, Turning Tool Shank 25 x 25mm. Internal Turning Tool Shank Ø40mm. Tailstock Travel 380mm, Quill Ø75mm, Quill Stroke 85mm, MT4 Taper. Run Hours 2,139. S/No. 25S1001 (2020). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. With Coolant System (190L Tank), Chip Conveyor, Filtermist S800 Mist Extraction Unit, Programmable Tailstock, Parts Catcher, Tool Setting Arm, Quantity Of Assorted Driven Tool Unit, Turning Tool Holders, Foot Switch, Signal Tower & Manuals. Overall Dimensions L3,160 x W1,805 x H1,935mm. Approx Weight 5,000kg. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Kjdpfjzc Id Uox Al Nslu Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: good (used), Year of construction: 2018, Control Fanuc 31i, bar capacity 20mm, maximum cutting diameter 20mm, Stroke of headstock 205mm, maximum drilling diameter 10mm, maximum tapping capacity M8, milling speed 8000rpm, spindle speed 10,000rpm, C axis 0.001 degree, Kedpfszd Eulox Al Njlu FMB barfeed, number of controlled axis X1, X2, Y1, Y2, Z1,Z2, C1 , C2.

Condition: good (used), Year of construction: 2016, Control Fanuc 31i, Kljdpfx Aozd Etnsl Nou bar capacity 38mm, stroke of headstock 320mm, maximum drilling diameter 23mm, maximum tapping capacity M16, milling speed 6,000rpm, spindle speed 7,000rpm, sub-spindle 7,000rpm, C axis 0.001 degree, FMB barfeed, number of controlled axis X1, X2,X3, Y1,Y2, Z1,Z2,B, C1, C2 .

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, Klodjzcy S Ropfx Al Nou spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, 3 X 12 station turrets, Klsdpfx Aljzcy Ilo Nju spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Klodpszdtkhefx Al Nou Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit. Kedpfxjzaz Uzo Al Njlu

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting Kedpfx Aevr Eh Eol Njlu • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, chuck outer diameter: 225 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, A complete DMG MORI CTX alpha 500 V6 model, fully equipped! This machine features a C-axis, powered tooling, Y-axis, sub-spindle, and more. We acquired this machine in working order from production, and it can be inspected in working condition by appointment. Kjdpfx Alezc Nlao Nelu Additional options & accessories: - Band filter system including high-pressure pump - DMG CELOS software - 3-jaw chuck (SMW Autoblok KNCS-N-225-66) on the main spindle - 3-jaw chuck (SMW Autoblok KNCS-N-170-43) on the sub-spindle - Chip conveyor - Coolant gun - Various VDI-30 tool holders (6 powered, 4 static) - Original DMG mist extraction system - All original documentation Weight & dimensions: 4,300 kg 4066x2583x1829 mm (LxWxH)

Condition: used, Year of construction: 2011, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Ksdpfx Aloy Ennae Njlu Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2008, operating hours: 24,869 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Kodpfx Ajy N D Rlel Nslu Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm