Used Lu-Ve Evaporator for sale (8,564)

Condition: excellent (used), functionality: fully functional, LU-VE mod EAV8s 7221 H/V for cooling media glycol / water fluid R134A-R404A 4x fans. Knedpfxez I S Rfs Ab Njc

Condition: used, Evaporator LUVE -Type: CS64H 3306GB 7SP.BAC.I -Cooling capacity: approx. 40 kW at DT8K -Fin spinning: 7 mm -Fans: 2 x 630 mm Knodpez Smlhofx Ab Noc -Dimensions: 3050 x 900 x 1100 mm -Place for electric defrost -Volume: 35 L -Quantity in stock: 2 -Reference number: CH 623 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Kodjym U E Hspfx Ab Nonc Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Knodpfxeyy R N As Ab Noc Shipping for an additional charge. Forklift available for loading.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling - Fully hinged, dust-tight lid - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Knjdpfjzxq U Hsx Ab Nsc Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Condition: good (used), functionality: fully functional, Year of construction: 2007, TRUMPF TruMatic 7000 – 1300 Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Kodsz Dumzopfx Ab Njnc Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 245988600001002, nominal power: 378.4 kW (514.48 HP), total length: 6,900 mm, total width: 1,100 mm, total height: 2,300 mm, type of cooling: air, Brand new Lu-ve EAV80-90 air-cooled condenser for Freon. We can supply this condenser with matching fans. The condenser block has minor transport damage. The condenser has a capacity of 378.4 kW at an air flow rate of 80,000 m³/h. Specifications: Brand: Lu-Ve Kjdpfxjx A Ta To Ab Njnc Model: EAV80-90 Product type: air-cooled condenser Capacity: 378.4 kW (based on an air flow of 80,000 m³/h) Number of fans: 6 Refrigerant: Freon Surface area: 716.1 m² Dimensions: 6900x1100x2300 mm (LxWxH) Weight: 1047 kg Year of manufacture: 2024

Condition: used, Year of construction: 2009, functionality: fully functional, space requirement length: 14,000 mm, space requirement width: 2,000 mm, total height: 1,500 mm, total length: 12,000 mm, total width: 1,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, Folding-Gluing machine Inramik Vesta 800 Plus 2009 - In production, 2 shifts per day, first owner - Up to 3 gluing points, Velco gluing system - Minimum box width 65mm - Maximum box width 800mm - Glue line monitoring/detection system - 1 ejector unit - Press section equipped with an acceleration/speed-up feature - Air nozzles and full tooling for CD envelopes and sleeves - Suction system at the feeder Knedps Aa I Nnofx Ab Noc - Support rails (2 per section, 8 in total) - Central guides, including the upper assembly for packaging alignment - Glue pot converted to a conical fitting (similar to Bobst machines) – a more advanced solution - Two glue wheels, 5mm and 3mm - Belts replaced on a regular schedule The machine has been continuously maintained by our in-house maintenance team; in excellent working condition throughout its entire service life. - Price includes dismantling and loading. Price: 45,000 EUR

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF. Knsdpfx Asx H R Rysb Noc

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Knodpfjvlnvrsx Ab Nsc

Year of construction: 2008, condition: ready for operation (used), machine/vehicle number: LF 020, Min. / max. web width: 150 – 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 1000 mm Max. rewind roll diameter: 400 mm (300 mm when using the 3-shaft turret) Knsdpfoy Shztjx Ab Nsc Core diameter: Unwind: 76 mm / Rewind: 40, 45 and 76 mm (3 sets of 3 shafts) Max. speed: 200 m/min Description: Unwind with splicing tables and clamping devices, web guiding and tension control (including automatic web clamping during stop operation as well as dancer rollers), up to 12 rotary or 12 stationary knives within a pneumatically controlled slitting unit, edge trim extraction, interactive digital control panel with color touchscreen, program memory, settings management, counting functions (labels or running meters), and inspection control (missing label detection), fully automatic 3-shaft turret rewinder for non-stop operation. All required safety devices are installed on the machine.

Condition: used, Year of construction: 2004, Fluid bed by Romaco Innojet. Model VENTILUS 800 (IEV800-001-2004). Manufactured in 2004. Included peripherals: - Bag filter DFO 4-32-R - Air heater Ksdpfxex Sqyxs Ab Nsnc

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Kjdpfxjyh Na Ej Ab Njnc

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Knodjzqt Dnjpfx Ab Njc Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: good (used), Year of construction: 2012, functionality: fully functional, Pouch Sealing: • Flat pouches. • Doypack (stand-up) pouches. Zipper Integration: • Capability to seal all types of zipper closures. Advanced Finishing Operations: • Punching of holes, handles, and easy-open features. • Rounded corners for aesthetic and safety purposes. Branson Ultrasonic Technology: • Ultrasonic sealing of zippers, ensuring precision and durability. Additional Equipment: • Built-in screw compressor (10 bar). • Chiller for the cooling station, ensuring efficient cooling of bottom seals and zipper seals. Technology and Modular Design • The machine's modular design allows it to be tailored to various types of films, including laminated and co-extruded films, while maintaining high precision and process repeatability. Knodpfovdptcex Ab Nec • Servo technology ensures excellent control of tension and sealing time, resulting in outstanding product quality and stability. Types of Pouches Produced on the Vegaplus Pouch System: • Three-side-sealed pouches. • Zipper pouches. • Doypack (stand-up) pouches made from a single film or with a separately inserted bottom gusset. • Retort pouches with rounded corners (notch-less). • Side-gusseted pouches with zippers.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, pressure: 10 bar, temperature: 184 °C, tank capacity: 9,630 l, Loos UL-S 5000. 10 bar. 5000 kg/h. Knodpfxj Aahlcs Ab Nsc

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high. Kedpfx Aboynnlij Nenc

Condition: excellent (used), Year of construction: 2015, MAZAK QUICK TURN SMART 250ML 1000U Max. turning diameter: 360 mm Max. machining length: 1,024 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm Machine is equipped with: - CNC control: Mazatrol Smart - KITAGAWA 3-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Interface for bar loader magazine - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 8 pcs. fixed tool holders Knodpfszy Um Aex Ab Noc - 2 pcs. driven tool holders

Year of construction: 2020, condition: good (used), Hot glue gun dispenser, glue pump, melting machine, glue melter, melting oven, hot glue gun, glue binder -Manufacturer: Nordson, VersaBlue melting device with accessories -Type: VB_ENG -Pumps: 3 gear pumps Kodpfsygtnyjx Ab Nonc -Accessories/individual components: see photos -Dimensions: 1070/760/H1380 mm -Total weight: 330 kg

Condition: used, Year of construction: 1998, operating hours: 7,109 h, load capacity: 4,500 kg, lifting height: 3,750 mm, fuel type: diesel, Equipment: head guard, CAT DP45 Diesel forklift with side shifter and fork adjustment! ----* Manufacturer: CAT * Model: DP45 * Year of manufacture: 1998 * Operating hours: approx. 7,109 * Load capacity: 4,500 KG * Lifting height: approx. 3.75 meters * Fork adjustment * Side shifter * 6-cylinder Mitsubishi diesel engine * Good condition! * More photos + video available upon request (WhatsApp Erik) * Price: 9,900 Euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Kjdpfx Abezwzk As Njnc All information is subject to change without notice, and errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. Kedsulpmzjpfx Ab Njnc In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Knsdpezrg T Eofx Ab Njc Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Knodezz Sidjpfx Ab Nec Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: excellent (used), functionality: fully functional, Panel saw Maximum cutting size: 5300 × 2240 × 80 mm Maximum cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade mounting hole diameter: 30 mm Acoustic pressure level at the workstation (LpA): 83 dB Blade speed: 4800 rpm Number of dust extraction nozzles: 1 × Ø 140 mm Knsdpfx Ajzkh R Nob Njc Compressed air connection: 6–10 bar Connected power: 7.5 kW Electrical supply: 3 × 400 V / 50 Hz Overall machine dimensions: 6620 × 3010 × 1742 mm Saw weight: 1100 kg

Condition: like new (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,000 kg, type of input current: three-phase, input voltage: 400 V, input current: 1,250 A, Complete medium and low voltage system including three 1000KVA 20KV transformers Comprised of: 3x Pauwels transformer 1000KVA 20000V 1x Alstom medium voltage switchgear for incoming ring circuit, 20KV Alstom load disconnect switch tap-off Outgoing measurement, 3x fuse outgoing circuits for 3x transformers 1x Siemens Sikus low voltage switchgear, power supply from 3 transformers, incl. 3 coupling switches for busbar connection Various outgoing terminals NH00 NH1 NH2 For further questions, please contact by phone or email. More pictures and details, nameplates available on request. Top condition – almost as new – see pictures. Dismantling was performed by an electrical company. All busbar connectors and bolts are included. Internal wiring for power metering has been withdrawn and labeled. Volume: one complete truck, 13.6 ldm, approx. 13,000KG including transformers. Knedpfx Ajy Hf Umob Nsc Collection only by appointment in 75053 Gondelsheim. A forklift is available for loading. Shipping possible via freight carrier, please inquire with postal code.