Used Müller Maschinen Plastic Mill for sale (19,647)

Condition: excellent (used), For sale: a fully functional Müller Maschinen SM 152 shredding mill. The machine is equipped with a hopper, a chamber with blades, a screen, and a control panel with an emergency stop switch. The visual condition and equipment are shown in the photos. Data from the nameplate: - Manufacturer: Müller Maschinen GmbH, Germany - Type: SM 152 Pjdpfx Aaoz Ezt Rszjgt - Year of manufacture: 2003 - Power supply: 400 V, 50 Hz - Power: 2.2 kW - Current: 5.2 A - Protection rating: IP54 - Machine number: 15203023

Condition: excellent (used), functionality: fully functional, Low-speed machine with gearbox Psdpfxjyf I Tbe Aazegt Cutting width – 250 mm Motor power – 3 kW Rotor speed 100 rpm Number of rotor blades – 20 pieces Number of stator blades – 2 pieces 5 units available, in perfect condition Capacity up to 50 kg/h Price 1550 EUR per unit

Condition: new, functionality: fully functional, empty load weight: 300 kg, maximum load weight: 300 kg, Year of construction: 2025, operating hours: 25 h, Motor: 3kW. Lassú fordulat , fordulat: 200f/perc Bedobó: 400x400mm, Pedpszay A Rjfx Aazjgt

Condition: excellent (used), functionality: fully functional, Low-speed shredder Cutting width – 150 mm Motor power – 2.2 kW Rotor speed – 200 rpm Number of rotor blades – 9 pieces Pjdpjyf I N Aefx Aazogt Number of stator blades – 2 pieces 4 units available, in perfect condition Capacity up to 25 kg/h Price: 1200 EUR per unit

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. Pgjdpfx Aaoznkx Dszet The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2017, operating hours: 14,000 h, Ref:11152 . 2018 Muller Martini Presto II Latest model short makeready stitcher - Only 14,000 hours worked! Equipped with: Pedpfxoz Ek Iwe Aazjgt 9 station track and chain 6 × 1551 twin feeders + 2 x hand feed 1528 cover folder feeder Presto II 1550 stitching unit with central operator control 2 x HK75Q stitching heads 1565 three-knife trimmer 1564 shingle delivery Specification: Max. untrimmed product: 365 × 305 mm Min. untrimmed product: 105 × 115 mm Max. trimmed product: 360 × 300 mm Min. trimmed product: 140 × 76 mm Max product thickness: 10 mm Max speed: 9,000 cycles/hour

Condition: repair required (used), Mill for recycling waste and plastics. Manufacturer: ALPINE AUGSBURG Type: RO 63/50 Motor power: 50 kW Feed hopper dimensions: 400 x 500 mm Included: 16 interchangeable screens with mesh sizes from 1 to 50 mm Machine dimensions: 3000 x 2000 mm Pgjdpfxjw E Nw Nj Aazjt Height with conveyor: 4200 mm Weight: 7000 kg Technical condition: used machine, no electrical installation.

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Pedpfjvyumyox Aazegt Very good condition, mechanically inspected, ready for operation.

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Type: R100/75/V Pjdpfx Aowav Hmeazegt Engine Power: 75 kW Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; Pgedpfx Aajv Hcwtjzst – electric cabinet, hydraulic system. slitter is for tube mill

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Psdpfjxrc Eqjx Aazegt Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Year of construction: 1995, condition: good (used), 600 mm rotor width Pjdpfofxg Dlox Aazjgt 7.5 kW motor 650 rpm

Condition: used, Year of construction: 2009, operating hours: 8,151 h, functionality: limited functionality, machine/vehicle number: 12200035, mileage: 575,461 km, gearing type: automatic, number of seats: 1, Equipment: cabin, hydraulics, rubber tracks, A complete horizontal directional drilling rig including equipment is being offered for sale. The listing is for sale only as a complete unit (truck, trailer, and drilling rig). Technical data for the truck: - Model: Actros 2544L - First registration: 10/2007 - Mileage: 575,461 km - Operating hours: 10,638 h Psdpfx Aexv Saxjazsgt - Power: 435 HP (320 kW) - Permissible gross weight: 25,000 kg - Body: swap body frame with Tracto mixing unit Technical data for the trailer: - Manufacturer: Müller-Mittetal - First registration: 07/2011 - Type: standard low loader - Technically permissible gross weight: 14,400 kg Technical data for the drilling rig: - Manufacturer: Tracto 15XP - Year of manufacture: 2009 - Operating hours: 8,151 h - Serial number: 12200005 Mixing unit specifications: - Manufacturer: Tracto - Model: MA07-D - Serial number: 09260614 - Year of manufacture: 2009 - Operating hours: 6,767 For further details (photos, data, etc.), please feel free to contact me.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Pedpfszza Egex Aazjgt Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, functionality: fully functional, Muller Martini Pony 246 Number of binding clamps: 5 Maximum production speed: Up to 3,000 cycles per hour Typical production speed: Approximately 1,500–2,500 books per hour Maximum book thickness: Up to approximately 40 mm Minimum book thickness: Approximately 3 mm Binding method: Hot-melt adhesive perfect binding Book Format: Maximum book size: Approximately 400 × 240 mm Minimum book size: Approximately 140 × 100 mm Spine preparation: Milling and roughening station Features and Equipment: 5 binding clamps Automatic cover feeder Pedoz Dh I Eopfx Aazjgt Hot-melt spine gluing system Hot-melt side gluing system Milling and spine roughening unit Cover scoring/creasing station Book delivery conveyor Waste removal and dust extraction system (configuration dependent) Glue system: Hot-melt adhesive.

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 Pgodpfx Ajzzki Njazjt - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total height: 1,560 mm, total width: 1,100 mm, total length: 700 mm, overall weight: 400 kg, workpiece weight (max.): 100 kg, Apex comminuting mill Capacity > 100 kg / h (The engine is larger than Schutte) Stainless steel Simple design Pgsdpfx Aasz D Tbwszst Compact size Used machine Screen sizes 2mm + one very small one (Will we get desired particle size)

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Pjdpfezvgdlsx Aazsgt Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 1967, condition: good (used), WKG 234 Offered here is a rotary table continuous milling machine milling from the company Müller of the type Duo Främatic. 
Technical data: Manufacturer: Müller Type: Duo Främatic Year of construction: 1966 Tool holder: ISO 50 Round table clamping surface inside: 650x1490mm travel: endless rotary small feed: 100mm/min large feed: 2000mm/min max. rotational speed: 650 rpm low speed: 88 rpm speeds: 8pcs weight: 5t milling spindles: 2 pieces distance table to spindle: 350mm power requirement: 27kW Remark: Suitable for carbide cutter heads (ø315mm) for light metal up to ø400mm. cutter lifting automatically with 1mm possible quill adjustment each 100mm drive of milling spindle separately possible Pedog Ummajpfx Aazogt There are several machines available!

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. Pgsdpfxozvgvns Aazot 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: used, empty load weight: 3,260 kg, maximum load weight: 7,240 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2008, loading space length: 7,100 mm, loading space width: 2,470 mm, loading space height: 2,600 mm, total length: 9,100 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245/70 R 19,5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem axle, curtain, lashing points, lifting and lowering mechanism, through-loading system, height-adjustable drawbar. Pgodpfei Rpxasx Aazot Body: through-loading, portal doors at the front, sliding tarpaulin, rear tailgate with roll-up cover, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing Podpfox Ry Hrsx Aazogt • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen Podpfjy R Ty Eex Aazsgt - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Transport system Müller Martini 3520 Year: 2008 - Transport system, length (approx): 8 mtr Max. mechanical speed: up to 4.000 cycles/h Maximum size range: 380 x 320 x 50 mm Minimum size range: 120 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Documents

Condition: excellent (used), Offer consisting of: Equipment Collating machine * Müller Martini ZTM 1571 with ASIR * 14 stations * Year of construction 2001 * 1 manual station * Outfeed gate 1572 (year of construction 2005) * 1 positioning element Perfect binder Acoro A5 * Milling and spine processing station * Hotmelt spine gluing unit with an 80-liter pre-melter * Hotmelt side gluing unit with an 18-liter pre-melter * Drum transfer feeder * Pressing station * Lay-down device * Drying section approx. 30 m Three-knife trimmer Müller Martini Merit-S * Year of construction 1998 * Infeed on the right * Pressing ram * Cutting cassettes No. 1–21 * 2 sets of knives Cross cutter CB-16 * Year of construction 1997 * Mobile base machine * Infeed belt with top belts * Turret for stack heights up to 240 mm * Pneumatic slide opening * Retractable ejector Additional equipment * Nordson PUR pre-melter (year of construction 2001) * PUR spine gluing unit * Special spine processing “Fibre Rougher” (new part) * Additional sets of knives for the three-knife trimmer Notes * Compressed air supply (6 bar), compressed air, vacuum and chip extraction required on site. * Inspection possible at any time by appointment. * Assistance with loading can be arranged. Pgedpozivbajfx Aazet

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Pedpfjzr H Aajx Aazjgt Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.